Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7774069d45)
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d4c0960f04)
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit a10853c5f8)
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
Fixes the deprecation warning:
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|search` use `result is search`.
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
The commit:
commit 1164cdc002
Author: Guillaume Abrioux <gabrioux@redhat.com>
Date: Thu Aug 2 11:58:47 2018 +0200
iscsigw: install ceph-iscsi-cli package
installs the cli package but does not start and enable the
rbd-target-api daemon needed for gwcli to communicate with the igw
nodes. This patch just enables and starts it for the non-container
setup. The container setup is already doing this.
This fixes bz https://bugzilla.redhat.com/show_bug.cgi?id=1613963
Signed-off-by: Mike Christie <mchristi@redhat.com>
Instead of failing the entire purge operation when the rbd command fails
just log an error. This will allow the higher level target and config
cleanup to complete, and the user only has to manually delete the rbd
images.
Signed-off-by: Mike Christie <mchristi@redhat.com>
We were not passing in the ceph conf info into the rbd image removal
command, so if the clustername was not the default igw purge would fail
due to the rbd rm command failing.
This just fixes the bug by passing in the ceph conf info which has the
clustername to use.
This fixes Red Hat bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1601949
Signed-off-by: Mike Christie <mchristi@redhat.com>
When using a module there is no need to apply this Ansible option. The
module will handle the idempotency on its own. So the module decides
wether or not the task has changed during the execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
We now have the ability to deploy a containerized version of ceph-iscsi.
The result is similar to the non-containerized version, you simply have
3 containers running for the following services:
* rbd-target-api
* rbd-target-gw
* tcmu-runner
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508144
Signed-off-by: Sébastien Han <seb@redhat.com>
trying to mask target when `/etc/systemd/system/target.service` doesn't
exist seems to be a bug.
There is no need to mask a unit file which doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch, the certificates where being generated on a single
node only (because of the run_once: true). Thus certificates were not
distributed on all the gateway nodes.
This would require a second ansible run to work. This patches fix the
creation and keys's distribution on all the nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1540845
Signed-off-by: Sébastien Han <seb@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
This is something that has nothing to do in `ceph-common`, this
is too specific to `ceph-iscsi-gw` role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
iscsi-gw needs a 'rbd' pool to configure iscsi target.
Note: I could have used the facts already set in `ceph-mon` but I voluntarily
didn't do it to not create a dependancy between these two roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is to ensure `docker_exec_cmd` fact is set with the correct value
in case of daemons collocation
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
generate_crt|bool|default(false) won't apply the default value, this
generate_crt|default(false)|bool will
Signed-off-by: Sébastien Han <seb@redhat.com>
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
Guillaume Abrioux
Jason Dillaman
Mike Christie
Neha Ojha
Rishabh Dave
Noah Watkins
Sébastien Han
George Shuklin
Major Hayden
Christian Berendt