Before this commit we were forcing ipv4 which might not be available.
Now setting ip_version to ipv4 or ipv6 will give you the right support.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1484189
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit eases the use of the
infrastructure-playbooks/switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook. We basically run it with a couple of pre-tasks and then we let
the playbook run the docker roles.
It obviously expect to have proper variables configured in order to
work.
Signed-off-by: Sébastien Han <seb@redhat.com>
The lvm_volumes variable is now a list of dictionaries that represent
each OSD you'd like to deploy using ceph-volume. Each dictionary must
have the following keys: data, journal and data_vg. Each dictionary also
can optionaly provide a journal_vg key.
The 'data' key represents the lv name used for the OSD and the 'data_vg'
key is the vg name that the given lv resides on. The 'journal' key is
either an lv, device or partition. The 'journal_vg' key is optional and
must be the vg name for the journal lv if given. This key is mainly used
for purging of the journal lv if purge-cluster.yml is run.
For example:
lvm_volumes:
- data: data_lv1
journal: journal_lv1
data_vg: vg1
journal_vg: vg2
- data: data_lv2
journal: /dev/sdc
data_vg: vg1
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves issue: Multiple RGW Ceph.conf Issue #1258
In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.
Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com
Modified ceph-defaults and ran generate_group_vars_sample.sh
group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.
Uncommented added variables in ceph-defaults
Updated tests by adding value for radosgw_interface
Added radosgw_interface to centos cluster tests
Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh
In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
The rbd-mirror daemon will be HA under luminous and new daemon health
features require a way to uniquely identify rbd-mirror instances.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
To be properly evaluated the "skipped" conditions must always have the
first place on the list of condition, otherwise the other conditions are
evaluated before and make the task fail.
Closes: https://github.com/ceph/ceph-ansible/issues/1733
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: task "check for a ceph socket in containerized deployment" will
be skipped if we are not an OSD.
with_items are still evaluated before when conditions so if the task was
skipped the dict will be empty and then fail.
Adding a "not skipped" condition skips the execution of the task.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1482061
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits force ceph-common to be installed early in deployment on
nodes.
For instance, ceph-rbdmirror doesn't have the CLI installed while it is
needed for some tasks which uses it to set some facts.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph services can fail to start under certain circumstances (for
example, when running in a container) because the default systemd
service configuration causes namespace issues.
To work around this we can override the system service settings by
placing an overrides file in the ceph-<service>@.service.d directory.
This can be generic so as to allow any potential changes required to
the ceph-<service> service files.
The overrides file is only setup when the
"ceph_<service>_systemd_overrides" config_template override variable is
specified.
The available service systemd override files are as follows:
ceph_mds_systemd_overrides
ceph_mgr_systemd_overrides
ceph_mon_systemd_overrides
ceph_osd_systemd_overrides
ceph_rbd_mirror_systemd_overrides
ceph_rgw_systemd_overrides
The original fix to issue #1755 only set the permissions on
the monitors to which the key was copied, but not the original
monitor where the key was created. Thus, we use a separate task
to set the permission of the key.
The openstack_keys structure now supports a key called mode
whose value is a string that one could pass to chmod to set
the mode of the key file. The ansible file module applies the
mode to all openstack keys with this property.
Fixes: #1755
This is under the MDS role instead of the mon role because that role
does not create the filesystem under docker.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
This scenario will create OSDs using ceph-volume and is only available
in ceph releases greater than Luminous.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
in containerized deployment, if you try to update your `ceph.conf` file
it won't be actually updated on your nodes because it is overwritten by
the copy of the file which is present in your fetch directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Move `fsid`,`monitor_name`,`docker_exec_cmd` and `ceph_release` set_fact
to `ceph-defaults` role.
It will allow to reuse these facts without having to play `ceph-common`
or `ceph-docker-common`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will give us more flexibility and avoid a lot of useless when
skipping all tasks from a non-desired role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new role `ceph-defaults`.
This role aims to handle all defaults vars for `ceph-docker-common` and
`ceph-common` and set basic facts (eg. `fsid`)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Merge `ceph-docker-common` and `ceph-common` defaults vars in
`ceph-defaults` role.
Remove redundant variables declaration in `ceph-mon` and `ceph-osd` roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't want to have heterogeous ceph.conf anymore and believe that we
should have the right section for the running daemon.
If we don't do this and use profiles, e.g: rgw, we will get a new rgw
section on some of the nodes.
Signed-off-by: Sébastien Han <seb@redhat.com>
It is mandatory now to set the Ceph version you want to install, e.g:
ceph_stable_release: luminous
To find the release names, you can look at the release not doc:
http://docs.ceph.com/docs/master/release-notes/
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
OSDs get started by ceph-disk before the ceph.conf file is written
with a crush location. That results in a crush map without configured
crush location.
To prevent this, we have to restart the OSDs during the initial setup
after the crush location was added to the ceph.conf file.
We have multiple issues with ceph-disk's cli with bluestore and Ceph
releases. This is mainly due to cli changes with Luminous. Luminous
introduced a --bluestore and --filestore options which respectively does
not exist on releases older than Luminous. The default store being
bluestore on Luminous, simply checking for the store is not enough so we
have to build a specific command line for ceph-disk depending on the
Ceph version we are running and the desired osd_store.
Signed-off-by: Sébastien Han <seb@redhat.com>
The keys and openstack_keys structure now supports an optional
key called acls whose value is a list of strings one could pass
to setfacl. The ansible ACL module applies the ACLs to all
openstack keys with this property.
Fixes: #1688
Remove `rgw enable static website` and `rgw enable usage log` from
ceph.conf and make it usable with ceph_config_overrides as profiles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit introduces a new directory called "profiles" which
contains some set of variables for a particular use case. These profiles
provide guidance for certain scenarios such as:
* configuring rgw with keystone v3
Signed-off-by: Sébastien Han <seb@redhat.com>
According to Alfredo, this was used for gitbuilders. Right now shaman/chacra
dev repos are unsigned.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Move condition at task level and not at include level to make `fsid`
variable available for all roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some tasks fetch file to `{{ fetch_directory }}/docker_mon_files` and
then try to copy from `{{ fetch_directory }}/{{ fsid }}`. That causes
the playbook to fail.
Fixes: #1683
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
To keep consistency between `{{ openstack_keys }}` and `{{ keys }}`
respectively in `ceph-mon` and `ceph-client` roles.
This commit also add the possibility to set mds caps.
Fixes: #1680
Co-Authored-by: John Fulton <johfulto@redhat.com>
Co-Authored-by: Giulio Fidente <gfidente@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph.conf template needs to look for the value of monitor_interface
in hostvars[host] because there might be different values set per host.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
In Luminous, ceph-disk defaults to bluestore so all our scenarios are
using bluestore, we need to force testing both.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to ceph/ceph-docker@69d9aa6, this explains how to deploy a
containerized cluster with a custom admin secret.
Basically, just need to pass the `admin_secret` defined in your
`group_vars/all.yml` to the `ceph_mon_docker_extra_env` variable.
Eg:
`ceph_mon_docker_extra_env: -e CLUSTER={{ cluster }} -e FSID={{ fsid }}
-e MON_NAME={{ monitor_name }} -e ADMIN_SECRET={{ admin_secret }}`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fail with a sane message if the devices or raw_journal_devices variables
are strings instead of lists during manual device assignment.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
rsync is required by the ansible synchronize package. Ensure
it is installed when local installation is selected.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
Add a new parameter `admin_secret` that allow to deploy a ceph cluster
with a custom admin secret.
Fix: #1630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits refactors how we deploy bluestore. We have existing
scenarios that we don't want to change too much. This commits eases the
user experience by now changing the way you use scenarios. Bluestore is
just a different interface to store objects but the scenarios more or
less remain the same.
If you set osd_objectstore == 'bluestore' along with
journal_collocation: true, you will get an OSD running bluestore with DB
and WAL partitions on the same device.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true, you will get an OSD running bluestore with a
dedicated drive for the rocksdb DB, then the remaining
drives (used with 'devices') will have WAL and DATA collocated.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true and declare bluestore_wal_devices you will get
an OSD running bluestore with a dedicated drive for rocksdb db, a
dedicated drive partition for rocksdb WAL and a dedicated drive for
DATA.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need for 2 variables to enable bluestore, prior to this
patch one had to do the following to activate bluestore:
osd_objectstore: bluestore
bluestore: true
Now you just need to set `osd_objectstore: bluestore`.
Fixes: https://github.com/ceph/ceph-ansible/issues/1475
Signed-off-by: Sébastien Han <seb@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some variables are missing from ceph-docker-common role since the
include of check_mandatory_vars.yml has been re-added in the ceph-mon
role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The check regarding the networking scenario configuration has been
moved from ceph-common to ceph-mon in 1de8176 but the include was not re-added
in 189f4fe
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
e8187f6 does not fix the ipv6 as expected since `ansible_default_*` are
filled with the IP address carried by the network interface used by the
default gateway route. By the way, it assumes that the MON_IP address will
be this IP address which is not always the case.
We need to keep using the previous fact but add some intelligence in the
template to determine how to retrieve the ipv4|ipv6 address since the path
to the fact in `hostvars` is not the same according to ipv4 vs ipv6 case.
Fix: 1569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add an extra variable to the openstack pools, which creates them with
defined rules. This will allow to place different pools on e.g.
different type of disks.
This commit will also set a new default rule when defined and move
the rbd pool to the new rule.
Somehow the shell module will return an error if the command line is not
next to it.
Plus fixed the import with the right path.
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Andrew Schoen
Alfredo Deza
SirishaGuduru
Jason Dillaman
Yoann Moulin
Guillaume Abrioux
Andy McCrae
John Fulton
Douglas Fuller
Andrew Schoen
Christian Zunker
Patrick Donnelly
yanyx
Florian Haas