Addition of ipv6 support in vagrant/libvirt and an all_daemons_ipv6 scenario.
Some typo fixes
Signed-off-by: Teoman ONAY <tonay@ibm.com>
(cherry picked from commit 8f3bdd8559)
When using a vagrant command from the root directory of the repo, it
throws an error if no 'vagrant_variables.yml' file is present.
```
Message: Errno::ENOENT: No such file or directory @ rb_sysopen - /home/guits/workspaces/ceph-ansible/vagrant_variables.yml
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This change default value of grafana-server group name.
Adding some tasks in ceph-defaults in order to keep backward
compatibility.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `enable extras on centos` task just doesn't work when using the
variable ceph_docker_enable_centos_extra_repo to true.
fatal: [xxx]; FAILED! => {"changed": false, "msg": "Parameter
'baseurl', 'metalink' or 'mirrorlist' is required."}
The CentOS extras repository is enabled by default so it's pretty
safe to remove this task and the associated variable.
This also removes the ceph_docker_on_openstack variable as it's a
leftover and it is unused.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commits removes these two symlinks.
They were there for backward compatibility and were marked deprecated as
of stable-4.0
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit reverts the following change:
fcf181342a (diff-23b6f443c01ea2efcb4f36eedfea9089R7-R14)
this is causing CI failures so this commit is intended to unlock the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
because of the current ip address assignation, it's not possible to
deploy more than 9 nodes per daemon type.
This commit refact a bit and allows us to get around this limitation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This change just adds the task to inject from the
ceph dashboard mgr module the required layouts
to show all the cluster metrics on the grafana
instance.
Since we're now able to push grafana layouts through
the ceph mgr module command, the dashboards configuration
template is no longer needed on containerized environments.
This commit also fixes the Vagrantfile IP static assigment
in the grafana section because it generates an issue (it's
the same of the mgr instance).
Finally, considering some deployments that use an external
grafana server instance, we reworked the 'grafana_server_addr'
assignment to address these requirements.
Signed-off-by: fmount <fpantano@redhat.com>
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
Those default values are useless and might cause issues.
- `osd_scenario` should be mandatory anyway.
- `pool_default_size` is not used anymore (this has been refactored
recently.
Closes: #3468
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
osd node's disks will remain on vagrant host,when run "vagrant destroy",
because we use time as a part of disk path, and time on delete not equal time on create.
we already use random_hostname in Libvirt backend,it will create disk
use the hostname as a part of diskname. for example: vagrant_osd2_1539159988_065f15e3e1fa6ceb0770-hda.qcow2.
Signed-off-by: binhong.hua <binhong.hua@gmail.com>
In case of an OpenStack "box", the Vagrantfile intend to check the
existence of os_networks and os_floating_ip_pool settings in
vagrant_variables.yml and pass them to the provider if they are set.
Due to two typos in the Vagrantfile this is not working as it checks the
wrong variable names.
This commit fixes the typos so these settings can be used.
Signed-off-by: Norbert Illés <illesnorbi@gmail.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
Set volume_cache to unsafe for CI VMs.
We might be using tmpfs for volume disks soon, therefore 'unsafe' is a
prerequisite for volume_cache
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Resolves issue: Multiple RGW Ceph.conf Issue #1258
In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.
Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com
Modified ceph-defaults and ran generate_group_vars_sample.sh
group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.
Uncommented added variables in ceph-defaults
Updated tests by adding value for radosgw_interface
Added radosgw_interface to centos cluster tests
Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh
In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
If debug is set to true in vagrant_variables.yml then during the vagrant
provision phase Ansible will run with -vvvv option
Signed-off-by: Sébastien Han <seb@redhat.com>
This variable is already defined as a global default in the OSD role and
was not being kept in sync as we now require the '-e' parameter prefixed
to each variable. This was also missing the CLUSTER environment variable
that is defined in the global default version of
ceph_osd_docker_extra_env.
This will allow each testing scenario to have a unique names
for it's disks so there will not be conflicts when running tests
in parallel.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This makes our libvirt boxes come up with the OS on /dev/vda and
three devices added at /dev/sd{a/b/c} so that we can ensure that
the OSD devices we want to use can always be available for
both virtualbox and libvirt for both xenial and centos7.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This was a holdout from the Linode merge that shouldn't have been
included. The right way to set the installation source is through
group_vars.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
- All Ceph instances now communicate using public subnet and
additionally OSDs communicate with each other using private cluster
subnet
- Workaround for
https://github.com/vagrant-libvirt/vagrant-libvirt/issues/645
- Fix for #952 to avoid concatenated MAC addresses caused by
vagrant-libvirt bug.
This enables running multiple clusters concurrently in the same Linode
account. Linode does not allow machines to have the same label.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Other things of note:
o You can now set the ceph branch to test against in
vagrant_variables.yml.
o You can now set the ceph_conf_overrides in vagrant_variables.yml.
This commit depends on an open PR:
https://github.com/displague/vagrant-linode/pull/66
Until that is merged, you must copy the changed file to your copy
of the vagrant-linode plugin, e.g.:
cp lib/vagrant-linode/actions/create.rb ~/.vagrant.d/gems/gems/vagrant-linode-0.2.7/lib/vagrant-linode/actions/create.rb
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Teoman ONAY
Mario Codeniera
Guillaume Abrioux
Dimitri Savineau
fmount
Andrew Schoen
binhong.hua
Norbert Illés
Sébastien Han
Prisacari Dmitrii
Ali Maredia
SirishaGuduru
Zack Cerza
Ivan Font
Alfredo Deza
Patrick Donnelly
James Saint-Rossy
Ivan Font