Those devices (db/wal) are never zapped in lvm batch deployment.
Iterating over `dedicated_devices` and `bluestore_wal_devices` fixes
this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1922926
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When rerunning the cephadm-adopt.yml playbook the radosgw realm,
zonegroup and zone tasks will fail because the task isn't
idempotent.
Using the radosgw ansible modules solves that problem.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If the cephadm-adopt.yml fails during the first execution and some
daemons have already been adopted by cephadm then we can't rerun
the playbook because the old container won't exist anymore.
Error: no container with name or ID ceph-mon-xxx found: no such container
If the daemons are adopted then the old systemd unit doesn't exist anymore
so any call to that unit with systemd will fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918424
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since the default of `osd_objectstore` has changed as of 3.2, some
deployments might have a mix of filestore and bluestore OSDs on a same
node. In some specific cases, there's a possibility that a filestore OSD
shares a journal/db device with a bluestore OSD. We shouldn't try to
redeploy in this context because ceph-volume will complain. (either
because in lvm batch you can't pass partition or about gpt header).
The safest option is to skip the migration on the node when such a mix
is detected or force all osds including those already using bluestore
(option `force_filestore_to_bluestore=True` has to be passed as an extra var).
If all OSDs are using filestore, then they will be migrated to
bluestore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1875777
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current check makes no sense because it checks any of other monitor
than the one being played (either a previous one already converted or a
next that isn't yet converted) is present on the quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1909011
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of iterate over the host list for adding the node/label to the
host orchestrator configuration then we can do it parallelly.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds cephadm_adopt ansible module for replacing the command module
usage with the cephadm adopt command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Let's discard the ansible lint error 306 and add a "# noqa 306" on tasks
where we don't need `set -o pipefail`
Fixes: #6090
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should always use the ceph_volume ansible module when possible.
This patch replace the ceph-volume inventory and lvm {list,zap} commands
called via the command/shell modules by the corresponding call with the
ceph_volume module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds cephadm_bootstrap ansible module for replacing the command module
usage with the cephadm bootstrap command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_osd ansible module for replacing the command module
usage with the ceph osd destroy/down/in/out/purge/rm commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_mgr_module ansible module for replacing the command module
usage with the ceph mgr module enable/disable commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
`ceph.target` should be disabled only. Otherwise, in collocation
scenario you stop other collocated services in the OSD play which isn't
what we want to do. Each daemon has its corresponding play for managing
the transition to container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1901865
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds ceph_volume_simple_{activate,scan} ansible modules for replacing
the command module usage with the ceph-volume simple activate/scan commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
adding monitor is no longer possible because we generate a new mon
keyring each time the playbook is run.
Fixes: #5864
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ignore 302,303 and 505 errors
[302] Using command rather than an argument to e.g. file
[303] Using command rather than module
[505] referenced files must exist
they aren't relevant on these tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
fa2bb3a only fix the symlink owner/group issue in the OSD play. If the
OSDs are collocated with other services like MONs and MGRs then the
chown command will fail.
$ find /var/lib/ceph/osd/ceph-0 -not -user 167 -execdir chown 167:167 {} +
chown: cannot dereference './block': Permission denied
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896448
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When deploying the ceph OSD via the packages then the ceph-osd@.service
unit is configured as enabled-runtime.
This means that each ceph-osd service will inherit from that state.
The enabled-runtime systemd state doesn't survive after a reboot.
For non containerized deployment the OSD are still starting after a
reboot because there's the ceph-volume@.service and/or ceph-osd.target
units that are doing the job.
$ systemctl list-unit-files|egrep '^ceph-(volume|osd)'|column -t
ceph-osd@.service enabled-runtime
ceph-volume@.service enabled
ceph-osd.target enabled
When switching to containerized deployment we are stopping/disabling
ceph-osd@XX.servive, ceph-volume and ceph.target and then removing the
systemd unit files.
But the new systemd units for containerized ceph-osd service will still
inherit from ceph-osd@.service unit file.
As a consequence, if an OSD host is rebooting after the playbook execution
then the ceph-osd service won't come back because they aren't enabled at
boot.
This patch also adds a reboot and testinfra run after running the switch
to container playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881288
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
cec994b introduced a regression when a mgr is collocated with a mon.
During the mon upgrade, the mgr service is masked to avoid to be
restarted on packages update.
Then the start mgr task is failing because the service is still masked.
Instead we should unmask it.
Fixes: #5983
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
bd611a7 introduced the new ceph_fs module but missed some tasks in
rolling_update and shrink-mds playbooks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the cluster health, we're using the health structure in the
ceph status output.
To optimize this, we could use the ceph health command which contains
the same needed information.
$ ceph status -f json | wc -c
2001
$ ceph health -f json | wc -c
46
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This playbook isn't needed anymore, we can achieve this operation by
running main playbook with `--limit` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the ceph_fs ansible module for replacing the command module
usage with the ceph fs command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds the `osd_auto_discovery` scenario support in the
filestore-to-bluestore playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881523
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
This change default value of grafana-server group name.
Adding some tasks in ceph-defaults in order to keep backward
compatibility.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In Pacific we're are sure that users already achieved the msgr2 because
that was introduced in Nautilus.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There's no need ot have a copy of this file in infrastructure-playbooks
directory.
playbooks in that directory can be run from the root dir of
ceph-ansible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of 2.10, group names containing a dash are invalid.
However, setting this option makes it still possible to use a dash in
group names and prevent this warning to show up.
It might need to be definitely addressed in a future ansible release.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1880476
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When running the switch2container playbook on a Debian based system
then the systemd unit path isn't the same than Red Hat based system.
Because the systemd unit files aren't removed then the new container
systemd unit isn't take in count.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Guillaume Abrioux
Dimitri Savineau