When using dedicated devices for db/journal/wal objecstore with
ceph-volume lvm batch then we should also validate that those devices
exist and don't use a gpt partition table in addition of the devices
and lvm_volume.data variables.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using findmnt command to find the device associated to the
root mount point then we can use the ansible_mounts fact.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of doing two parted calls we can check first if the device exist
and then test the partition table.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2888c08 introduced a regression as the check_devices tasks file was
only included based on the devices variable.
But that file also validate some devices from the lvm_volumes variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1906022
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Starting RHCS 5, there's no ISO available anymore.
This removes all ISO variables and the ceph_repository_type variable.
Closes: #6626
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Do not rely on the inventory aliases in order to check if the selected
manager to be removed is present.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967897
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If multi-realms were deployed with several instances belonging to the same
realm and zone using the same port on different nodes, the service id
expected by cephadm will be the same and therefore only one service will
be deployed. We need to create a service called
`<node>.<realm>.<zone>.<port>` to be sure the service name will be unique
and well deployed on the expected node in order to preserve backward
compatibility with the rgws instances that were deployed with
ceph-ansible.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the ceph-validate role before starting the switch to a containerized
deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1968177
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It was requested for us to update our alerting definitions to include a
slow OSD Ops health check.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1951664
Signed-off-by: Boris Ranto <branto@redhat.com>
We need to support rgw multisite deployments.
This commit makes the adoption playbook support this kind of deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When running the switch-to-containers playbook with multisite enabled,
the fact "rgw_instances" is only set for the node being processed
(serial: 1), the consequence of that is that the set_fact of
'rgw_instances_all' can't iterate over all rgw node in order to look up
each 'rgw_instances_host'.
Adding a condition checking whether hostvars[item]["rgw_instances_host"]
is defined fixes this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967926
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling lvmetad in containerized deployments on el7 based OS might
cause issues.
This commit make it possible to disable this service if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955040
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When calling the `ceph_key` module with `state: info`, if the ceph
command called fails, the actual error is hidden by the module which
makes it pretty difficult to troubleshoot.
The current code always states that if rc is not equal to 0 the keyring
doesn't exist.
`state: info` should always return the actual rc, stdout and stderr.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964889
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When no `[mgrs]` group is defined in the inventory, mgr daemon are
implicitly collocated with monitors.
This task currently relies on the length of the mgr group in order to
tell cephadm to deploy mgr daemons.
If there's no `[mgrs]` group defined in the inventory, it will ask
cephadm to deploy 0 mgr daemon which doesn't make sense and will throw
an error.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we fire up much less VMs than other job, we can affoard allocating
more memory here for this job.
Each VM hosts more daemon so 1024Mb can be too few.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When monitors and rgw are collocated with multisite enabled, the
rolling_update playbook fails because during the workflow, we run some
radosgw-admin commands very early on the first mon even though this is
the monitor being upgraded, it means the container doesn't exist since
it was stopped.
This block is relevant only for scaling out rgw daemons or initial
deployment. In rolling_update workflow, it is not needed so let's skip
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970232
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This reverts commit 2e19d1705e.
A new build of ceph@master including the fix is available so
this is not needed anymore.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Due to a recent commit that has introduced a regression in ceph, this
test is failing.
Temporarily disabling it to unblock the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
0990ae4109 changed the filter in
selectattr() from 'match' to 'equalto' but due to an incompatibility with
the Jinja2 version for python 2.7 on el7 we must stick to using 'match'
filter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
using 'match' filter in that task will lead to bad behavior if I have
the following node names for instance:
- node1
- node11
- node111
with `selectattr('name', 'match', inventory_hostname)` it will match
'node1' along with 'node11' and 'node111'.
using 'equalto' filter will make sure we only match the target node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1963066
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When osd nodes are collocated in the clients group (HCI context for
instance), the current logic will exclude osd nodes since they are
present in the client group.
The best fix would be to exclude clients node only when they are not
member of another group but for now, as a workaround, we can enforce
the addition of osd nodes to fix this specific case.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947695
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
temporary work around vagrant cloud issue which seems broken at the time
of pushing this commit.
Let's pull images from cloud.centos.org for now since vagrant cloud
hosted images return a 403 error.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we need to revert 33bfb10, this is an alternative to initial approach.
We can avoid maintaining this file since it is present in container
image. The idea is to simply get it from the image container and write
it to the host.
Fixes: #6501
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The pg_autoscale_mode for rgw pools introduced in 9f03a52 was wrong
and was missing a `value` keyword because `rgw_create_pools` is a
dict.
Fixes: #6516
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is a workaround for an issue in ansible.
When trying to stop/mask/disable this service in one task, the stop
didn't actually happen, the task doesn't fail but for some reason the
container is still present and running.
Then the task starting the service in the role ceph-crash fails because
it can't start the container since it's already running with the same
name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955393
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph-ansible leaves a ceph-crash container in containerized deployment.
It means we end up with 2 ceph-crash containers running after the
migration playbook is complete.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1954614
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Due to a recent breaking change in ceph, this command must be modified
to add the <svc_id> parameter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When migrating from a cluster with no MDS nodes deployed,
`{{ cephfs_data_pool.name }}` doesn't exist so we need to create a pool
for storing nfs export objects.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1950403
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It looks like the generate_group_vars_sample.sh script wasn't executed
during previous PRs that were modifying the default values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When dashboard_frontend_vip is provided, all the services should be
configured using the related VIP. A new VIP variable is added for
both prometheus and alertmanager: we're already able to properly
config the grafana vip using dashboard_frontend_vip variable.
This change adds the same variable for both prometheus and
alertmanager.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
Dimitri Savineau
Wong Hoi Sing Edison
Guillaume Abrioux
Boris Ranto
David Galloway
Neelaksh Singh
Seena Fallah
Francesco Pantano