Since we now only support systemd has an init system we can finally
treat containers as processes using systemd and this for all the
distros.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits allows us to restart Ceph daemon machine by machine instead
of restarting all the daemons in a single shot.
Rework the structure of the handler for clarity as well.
Signed-off-by: Sébastien Han <seb@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some users purge their environments and leave it in a non-optimal state.
e.g: packages are still installed but /etc/ceph and /var/lib/ceph don't
exist anymore. This will result in multiple failures across the play,
sometimes hard to detect. Populating these directories "just in case"
should help us solving these problems.
Closes: #1253
Signed-off-by: Sébastien Han <seb@redhat.com>
Sometimes users for testing, tend to delete the whole /var/lib/ceph and
then run ansible again, OSD will never come up if we do not create their
directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
This patch makes sure we set the proper pool size on the rbd pool.
Usually during bootstrap the rbd pool size is not honoured so we need to
add this workaround.
Signed-off-by: Sébastien Han <seb@redhat.com>
This allows the user to set ip_version to either ipv4 or ipv6. This
resolves a bug where monitor_address is set to an ipv6 address, but the
template fails to render because it's hardcoded to look for an 'ipv4'
key in the ansible facts.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1416010
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: bz#1416010
could have scenario where different openstack components would
use the same pool, but the logic would create the same pool
more than once
add unique filter to account for this
Allow for more operator flexibility in the `rgw frontends` setting
while maintaining backwards compatibility with the old vars. This
allows an operator to, for example, use the civetweb settings for
implementing SSL ports.
For available civetweb configuration parameters, see:
https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md
It is not enough to check for the mds to exists, it actually always does
because we declare the variable. So we need to make sure that there is a
mds host.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we introduced config_overrides we removed a lot of options from
the default template. In some cases, like mds pool, openstack pools etc
we need to know the amount of PGs required. The idea here is to skip the
task if ceph_conf_overrides.global.osd_pool_default_pg_num is not define
in your `group_vars/all.yml`.
Closes: #1145
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
This allows for the role to be used with ansible-galaxy and to fix the
include in all the meta/main.yml files in the roles.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The libcephfs1 package was removed from ceph-common in
cb1c06901e, however it was not synced
to group_vars/all.yml.sample using the `generate_group_vars_sample.sh`
script. This fixes up the comment formatting in the ceph-common
defaults and brings the group_vars sample back into sync.
Prior to this change, a playbook run with '--tags' or '--skip-tags'
would fail, because the ceph-common role would not include the
release.yml task, and this file defines critical things like
ceph_release.
Thanks Andrew Schoen <aschoen@redhat.com> for help with the fix.
Task put initial mon keyring in mon kv store from
ceph-mon/tasks/ceph_keys.yml is failing when cephx is disabled. The root
cause is that variable monitor_keyring is not populated by any task from
deploy_monitors.yml.
Fixes: #1211
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
Once we have our first monitor up and running we need to add it to the
monitor store as a safety measure. Just in case the local file gets
deleted and you need to add a new monitor. Now you can retrieve this key
like this:
ceph config-key get initial_mon_keyring > initial_mon_keyring.txt
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need to become root on local_action. This will event trigger
an error on some systems as it will try to run a sudo command. If the
current user does not have passwordless sudo, Ansible will fail. Anyway
using the current user is perfectly fine and no elevation privilege is
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
The Keystone v2 APIs are deprecated and scheduled to be removed in
Q release of Openstack. This adds support for configuring RGW to
use the current Keystone v3 API.
The PKI keys are used to decrypt the Keystone revocation list when
PKI tokens are used. When UUID or Fernet token providers are used in
Keystone, PKI certs may not exist, so we now accommodate this scenario
by allowing the operator to disable the PKI tasks.
Jewel added support for user/pass authentication with Keystone,
allowing deployers to disable Keystone admin token as required
for production deployments.
This implements configuration for the new RGW Keystone user/pass
authentication feature added in Jewel.
See docs here: http://docs.ceph.com/docs/master/radosgw/keystone/
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the initial mon keyring
doesn't exist so we are generating a new one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do not need to run another condition for 'ceph_rhcs' since the
include we came from already has it, so we are already inside this
condition.
We also spell red hat entirely instead of rh and we remove capital
letters.
Signed-off-by: Sébastien Han <seb@redhat.com>
When `ceph_stable_rh_storage` is True, every cluster node should have a
`/etc/apt/preferences.d/rhcs.pref` file with the following contents:
```
Explanation: Prefer Red Hat packages
Package: *
Pin: release o=/Red Hat/
Pin-Priority: 999
```
ceph-deploy already did this when used with ice-setup, and we need to do
the same thing with the ceph-ansible stack.
Closes: #1182 and https://bugzilla.redhat.com/show_bug.cgi?id=1404515
Signed-off-by: Sébastien Han <seb@redhat.com>
Only when ceph_origin == "upstream", install_on_redhat.yml will include
redhat_ceph_repository.yml, same as debian.
In redhat_ceph_repository.yml, ceph_custom_repo will be added.
But in check_mandatory_vars.yml, ceph_origin=="upstream" can't be combined
with ceph_custom
If previous check was not run, .stdout_lines is not a valid key on the dictionary.
To get around this, use .get("stdout_lines") instead.
Also add in a default empty list
in hammer, ceph-common depended on libcephfs (indirectly, via
python-cephfs). this is no longer the case in jewel or later, so it can
be removed from debian_ceph_packages
Signed-off-by: Casey Bodley <cbodley@redhat.com>
For readibility and clarity we do not run any tasks directly in the
main.yml file. This file should only contain include, which helps us
later to apply conditionnals if we want to.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit re-uses some of the existing ceph-ansible variables for a
containirzed deployment. There is no reasons why we should add new
variables for the containerized deployment.
Signed-off-by: Sébastien Han <seb@redhat.com>
mon_group_name variable can be used to override mons group, but
this task assumes the group is always 'mons'. So we need to use
the var to find the group name instead.
Before this patch only the address for the first mon would show
in the ceph.conf even if there were multiple mons in the inventory.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Once the monitor process starts it will also trigger `ceph-create-keys`
which will collect the admin key and bootstrap keys. We used to force
this command because we were having issues on some distros like centos
7.0 and 7.1 not triggering this. This is fixed on centos 7.2 and not an
issue on ubuntu 14.04 or 16.04 so we can remove this task. If the
monitor hangs or fails to start the playbook will fail right after at
the "wait for client.admin key exists" task after 300sec.
Closes: #1161
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the fsid doesn't exist so we
are creating a new one. Later the ceph.conf gets updated with a wrong
fsid which causes problems for clients and ceph processes.
Closes: #1148
Signed-off-by: Sébastien Han <seb@redhat.com>
Adding that avoids this bug:
https://github.com/ansible/ansible/issues/18206
Without that you'll get failures like:
TASK [ceph-mon : set keys permissions]
*****************************************
task path:
/home/andrewschoen/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:31
fatal: [mon0]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute 'stdout_lines'"}
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
We removed the "apache" setting for "radosgw_frontend" in
adfdf6871e.
As part of that change, we removed the final references to
ceph-extra.repo, but I failed to clean up this file itself.
Now that nothing uses this file, delete it.
This file contained the sole reference to redhat_distro_ceph_extra, so
we can drop that variable as well.
Refactor the code using 'package' module
Fix Issue #520
(However it doesn't cover all cases because some cases are not refactorable.
Ex: because of diverging packages name between distribution)
a397922 introduced a syntax error by attempting to default an unquoted
string, which causes execution failures on some ansible versions with:
Failed to template {{ ceph_rhcs_mount_path }}: Failed to template {{ ceph_stable_rh_storage_mount_path | default(/tmp/rh-storage-mount) }}: template error while templating string: unexpected '/'
libfcgi is dead upstream (http://tracker.ceph.com/issues/16784)
The RGW developers intend to remove libfcgi support entirely before the
Luminous release.
Since libfcgi gets little-to-no developer attention or testing, remove
it entirely from ceph-ansible.
Ansible task was not properly fetching OSD cluster keyring causing
the keyring to be missing when we needed to authenticate. Similarly, we
were not properly waiting on the OSD keyring to be available before
continuing.
Signed-off-by: Ivan Font <ifont@redhat.com>
- Update rolling update playbook to support containerized deployments
for mons, osds, mdss, and rgws
- Skip checking if existing cluster is running when performing a rolling
update
- Fixed bug where we were failing to start the mds container because it
was missing the admin keyring. The admin keyring was missing because
it was not being pushed from the mon host to the ansible host due to
the keyring not being available before running the copy_configs.yml
task include file. Now we forcefully wait for the admin keyring to be
generated before continuing with the copy_configs.yml task include file
- Skip pre_requisite.yml when running on atomic host. This technically
no longer requires specifying to skip tasks containing the with_pkg tag
- Add missing variables to all.docker.sample
- Misc. cleanup
Signed-off-by: Ivan Font <ifont@redhat.com>
We have a fact that detects the package manager, so we can detect if
systemd is used. Radosgw was still using some old logic from Ubuntu.
Ubuntu 16.04 now has systemd so we don't need to configure rgw as it was
running on upstart.
Signed-off-by: Sébastien Han <seb@redhat.com>
ansible 2.2 deprecates first_available_file option which is used in
the config_template module by 'generate ceph configuration file' task.
This change syncs the config_module files from their master repository
in github.com/openstack/openstack/ansible-plugins which includes the fix
2f6cac2cf6
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
Even for dmcrypt we need to check the "devices" status and
"raw_journal_devices" as well so we can fix them if there is something
wrong with them.
Signed-off-by: Sébastien Han <seb@redhat.com>
Before this commit if you had set monitor_interface in your
inventory file for a specific host it would be ignored and the value
in group_vars/all would have been used.
Also, this enables support for monitor_address again as it had been
broken by previous changes to this template.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This is done for preventing of their use-before-definition for osd scenarios checks (should be removed after a refactor has properly seperated all the checks into appropriate roles).
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
Users reported that pool_default_pg_num is not honoured for the default
pool 'rbd'. So now we check the pg num value for the RBD pool and if it
does not match pool_default_pg_num then we delete and recreate it.
We also make sure the pool is empty first, just in case someone changed
the value manually and didn't reflect the change in ceph-ansible.
The only issue with this patch is that the pool ID will not be 0 anymore
but more likely 1.
Signed-off-by: Sébastien Han <seb@redhat.com>
backward compatibility for ceph-ansible version running latest code but
using variables defined before commit: 492518a2
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-fetch-keys role currently works only if cluster name is 'ceph'.
This commit allows to set custom cluster name in 'defaults' in the same
fashion as other roles do.
This RHCS version is now generally available. Default to using it.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Related: rhbz#1357631
By overriding the openstack_pools variable introduced by this commit, the
deployer may choose not to create some of the openstack pools, or to add
new pools which were not foreseen by ceph-ansible, e.g. for a gnocchi
storage backend.
For backwards compatibility, we keep the openstack_glance_pool,
openstack_cinder_pool, openstack_nova_pool and
openstack_cinder_backup_pool variables, although the user may now choose
to specify the pools directly as dictionary literals inside the
openstack_pools list.
This allows us to test devices set with persistent naming such as
/dev/disk/by-*
When registering devices we can use persisent (/dev/disk/by-*) or
non-persistent (/dev/sd*). Both declarations are supported by
ceph-ansible. There was just two tasks that were not compatible with
this. Since we support using partitions directly we need to test that
because the device activation will be different. To test if the device
is a partition we use a regular expression which wasn't compatible with
the persistent device naming format (/dev/disk/by-*).
This commit solves this issue by reading the path of the symlink since
devices like /dev/disk/by-* are symlinks to devices like /dev/sd*
Signed-off-by: Sébastien Han <seb@redhat.com>
For some providers (such as upcoming Linode support), some NICs may have
multiple IP addresses. (In the case of Linode, the only NIC has a public
and private IP address.) This is normally okay as we can use the
ceph.conf cluster_network and public_network variables to force the
monitor to listen on the addresses we want. However, we also need
ansible to set the correct monitor IP addresses in "mon hosts" (i.e. the
addresses the monitors will listen on!). This new monitor_address_block
setting tells ansible which IP address to use for each monitor.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
- Move mon_containerized_default_ceph_conf_with_kv config from ceph-mon
to ceph-common defaults as it's used in ceph-nfs
- Update conditional to generate ganesha config when not
mon_containerized_default_ceph_conf_with_kv
- Revert change to store radosgw keyring using ansible_hostname on
ansible server so that ceph-nfs can find it
- Update ceph-ceph-nfs0-rgw-user container to use ansible_hostname
variable
Signed-off-by: Ivan Font <ivan.font@redhat.com>
use the activation scenario instead of the full ceph_disk one, we
already have a task to prepare osds so we just need to activate the
device.
working for me using vagrant :)
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need to run the actions from
roles/ceph-mon/tasks/docker/create_configs.yml
on the first monitor only since the monitor deployment happens
**serially**.
Moreover with Vagrant it's useful to allow the auto creation of the
cluster fsid, so enabling the option. If this is not desired you can
still set `fsid: 9c9c0448-0551-401d-b55b-e5b3a42bae42` for example.
Signed-off-by: Sébastien Han <seb@redhat.com>
- Gather facts only for mons before processing ceph-mon role serially in
containerized playbook sample
- Updated ceph.conf in order to generate a valid ceph.conf
Signed-off-by: Ivan Font <ivan.font@redhat.com>
- Move fsal_rgw config to ceph-common, as it's shaered with ceph-rgw
- Update all.docker.sample with NFS config
- Rename fsal_rgw to nfs_obj_gw and fsal_ceph to nfs_file_gw, because
the former names mean nothing to non-Ganesha developers
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
-First install ceph into a directory with CMake
cmake -DCMAKE_INSTALL_LIBEXECDIR=/usr/lib -DWITH_SYSTEMD=ON -DCMAKE_INSTALL_PREFIX:PATH:=/usr <ceph_src_dir> && make DESTDIR=<install_dir> install/strip
-Ceph-ansible copies over the install_dir
-User can use rundep_installer.sh to install any runtime dependencies that ceph needs onto the machine from rundep
* changed s/colocation/collocation/
* declare dmcrypt variable in ceph-common so the variables check does
not fail
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes#845 for containerized deployments. We now also mount the
/etc/localtime volume in the containers in order to synchronize the host
timezone with the container timezone.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Prior to this change, each ceph cluster node would end up with several
"qemu-client-$pid.log" files owned by root. The [client] section would
capture *all* client activity (for example the "ceph health" command,
etc), not just librbd-in-qemu.
Restrict this section to libvirt clients only so that we don't generate
these spurious log files for other Ceph client traffic.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Deployment fails when the ``secure_cluster`` is false:
TASK [ceph-mon : secure the cluster]
*******************************************
fatal: [saceph-mon.vm.ceph.asheplyakov]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute 'stdout_lines'"}
fatal: [saceph-mon2.vm.ceph.asheplyakov]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute 'stdout_lines'"}
fatal: [saceph-mon3.vm.ceph.asheplyakov]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute 'stdout_lines'"}
A conditional include evaluates all included tasks with the (additional)
conditional applied to every task [1]. Thus all tasks from `secure_cluster.yml'
are always evaluated (with an additional 'when: secure_cluster' condition).
The `secure the cluster' task iterates over ``ceph_pools.stdout_lines``
even if ``secure_cluster`` is false: in loops ansible applies conditional
to every item (by design) [2]. However the `collect all the pools' task
is skipped if the very same condition evaluates to false, which leaves
the ``ceph_pools`` undefined, so the `secure the cluster' task fails:
Provide the default (empty) list to avoid the problem.
[1] http://docs.ansible.com/ansible/playbooks_conditionals.html#applying-when-to-roles-and-includes
[2] http://docs.ansible.com/ansible/playbooks_conditionals.html#loops-and-conditionalsCloses: #913
Signed-off-by: Alexey Sheplyakov <asheplyakov@mirantis.com>
Update each role's task to use the respective role's username, image
name, and image tag to check if a container is already running. This was
causing false failures because we were not matching any running
containers and subsequently running checks.yml to check the status of
cluster files being left behind.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Journal size is not mandatory anymore, a default from 5GB is being
added. A simple warning message will show up if the size is set to
something below 5GB.
Signed-off-by: Sébastien Han <seb@redhat.com>
The ceph-common role fails when you run ansible with --check. Adding
always_run to a few tasks makes the check go through easier (although
it's not foolproof).
This will help if the path to the iso exists in the originating server but not
in the remote paths. This issue is not seen if using /tmp/file.iso but does
show up when using nested paths.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: rhbz#1355762
init_system was getting the value of "systemd\n"
and was later compared to be equal to "systemd"
making the wrong scripts to be executed.
Signed-off-by: Alberto Murillo <alberto.murillo.silva@intel.com>
Add the ability to use a custom repo, rather than just upstream, RHEL,
and distro. This allows ansible to be used for internal testing.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
If the docker image cannot be retrieved we will fail this task silently
and the playbook ultimately succeeds without a successful deployment.
This change makes it so we fail the playbook immediately.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Ceph has the ability to export it's filesystem via NFS using Ganesha.
Add a ceph-nfs role that will start Ganesha and export the Ceph
filesystems.
Note that, although support is going in to export RGW via NFS, this is
not working yet.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
The config template is in ceph-common, not in the individual roles, so
roles referencing it need to use playbook_dir, not role_path.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
- Check for nmap being available was not running as a local_action, when the checks using nmap were
- Various fixes on Ansible 2.x now that the above is working
This causes ceph-ansible scripts to fail when targeting Centos7 machines.
Installation fails because newer ceph package dependencies provided
by ceph-release-{version}.noarch.rpm were overridden by older
package dependency versions in default distribution repositories,
due to the fact that default distribution repositories have higher
priority.
Docker makes it difficult to use images that are not on signed
registries. This is a problem for developers, who likely won't have
access to a registry with proper signed certificates.
This allows the ability to use any docker image on the machine running
vagrant/ansible. The way it works is that the image in question is
exported locally, then sent to each target box and imported there.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
This will allow nodes to install rhcs that do
not have access to the internet.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: rhbz#1337601
In order to align all Ansible versions, we now use the full path for the
template. We rely on `role_path` variable. Now all the tasks using
the template module have a uniform syntax.
Might fix issue raised in #483
Signed-off-by: Sébastien Han <seb@redhat.com>
The scenarios were not being accurately compared to ensure that:
* A single scenario was choosen
* ONLY a single scenario was choosen
This solution does not scale for long, but that can be addressed in a
different patchset.
By default, this roles will create a ceph config file and get the admin
key. You can optionnally add other users, keys and pools for your tests.
Closes: #769
Signed-off-by: Sébastien Han <seb@redhat.com>
Add support to allow ceph-ansible to install and
configure Ceph on Debian on the ppc64le architecture.
Canonical has ppc64le Debian packages in Ubuntu distros
and on Ubuntu Cloud Archive. Both of which can be installed
and configured using the 'distro' or 'uca' options in
ceph-ansible when this patch is used.
Signed-off-by: Samuel Matzek <smatzek@us.ibm.com>
Since ##461 we have been having the ability to override ceph default
options. Previously we had to add a new line in the template and then
another variable as well. Doing a PR for one option was such a pain. As
a result, we now have tons of options that we need to maintain across
all the ceph version, yet another painful thing to do.
This commit removes all the ceph options so they are handled by ceph
directly. If you want to add a new option, feel free to to use the
`ceph_conf_overrides` variable of your `group_vars/all`.
Risks, for those who have been managing their ceph using ceph-ansible
this is not a trivial change as it will trigger a change in your
`ceph.conf` and then restart all your ceph services. Moreover if you did
some specific tweaks as well, prior to run ansible you should update the
`ceph_conf_overrides` variable to reflect your previous changes.
To avoid service restart, you need to know a bit of ansible for this,
but generally the idea would be to run ansible on a dummy host to
generate the ceph.conf, then scp this file to all your ceph hosts and
you should be good.
Closes: #693
Signed-off-by: Sébastien Han <seb@redhat.com>
This is purely a refactor. Converts when 'and' conditionals into lists
rather than multiline strings. This does not work for nested
conditionals, but those can be formated with indents.
Moves one line when statements onto the same line as the when command
itself.
A small logic bug was found in ceph-osd/tasks/check_devices.yml which
which was also fixed.
Signed-off-by: Sam Yaple <sam@yaple.net>
Somehow on CentOS 7.2 with Jewel, the service enablement by the Ansible service module
does not seem to work properly.
Signed-off-by: Sébastien Han <seb@redhat.com>
This adds a helper fact that uses the ``init_system`` fact to determine if
we should be using systemd or not when controlling services.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The ceph-osd role currently uses ansible_service_mgr, which is a fact
only available on ansible 2.x and greater. This commit sets a similar
fact called init_system which will store the contents of /proc/1/comm
(systemd, init, etc.) and then references it ceph-osd instead.
Closes#741
If the ceph cluster name includes numbers, the grep used to find the OSD
IDs from /var/lib/ceph/osd/ would also return the numbers that were in
the cluster name.
For example, if the cluster was named 'mine123' and there was only one
OSD on the node, then the task that finds the OSD IDs would return
'123' and '0'.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds support to allow the install of Ceph from the
Ubuntu Cloud Archive. The Ubuntu Cloud Archive provides newer
release of Ceph than the normal Ubuntu distro repository.
Signed-off-by: Samuel Matzek <smatzek@us.ibm.com>
Since developement versions of Ceph are after infernalis a package split
happened. So basically ceph-mon, ceph-osd, ceph-mds need to be
installed.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will allow a user to conditionally install the ceph package on rpm
based systems. Installing this package is not required or wanted in
versions passed infernalis.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Introducing a new config option: `radosgw_civetweb_bind_ip` which points
to the `ansible_default_ipv4` by default. You can override this
variable. Use ansible facts to put a proper value.
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes the ceph.conf template so that it will look for an inventory
defined value for monitor_interface or for monitor_interface defined in
a group_vars file.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This fixes a bug where monitor_interface might be set in your inventory
file and not by using group_vars or --extra-vars causing the template to
use the default address of 0.0.0.0 instead of the defined
monitor_interface.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Instead of creating the RBD client socket path three different places
in three different ways, this creates it once. Ceph on OpenStack users
have the option to customize the permissions of the RBD client
directories.
Fixes#687
As written, generating the config file for ceph-mon in Docker yielded:
ERROR: config_template is not a legal parameter in an Ansible task or
handler
This fixes that error condition.
We now check if the device has already been prepared, if we detect a
ceph partition we do not prepare the device.
Also fixed some issues while running on Atomic or CoreOS.
Signed-off-by: Sébastien Han <seb@redhat.com>
fixing the can't open /var/lib/ceph/bootstrap-osd/ceph.keyring: can't
open /var/lib/ceph/bootstrap-osd/ceph.keyring: (13) Permission denied
Signed-off-by: Sébastien Han <seb@redhat.com>
we now have the ability to enable the `cluster` variable with a specific
value that will determine the name of the cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph.conf.j2 template requires a new line between mon_containerized_deployment_with_kv and fsid variables
With this commit , i have added a new line for better readablity
ceph.conf file generation task in ceph-common role was getting failed
because it ansible cant find defination of varriable mon_containerized_deployment_with_kv
This fix declare mon_containerized_deployment_with_kv under ceph-common/defaults/main.yml which fixes this issue
Signed-off-by: ksingh7 <karan.singh731987@gmail.com>
With Jewel comes a new store to store Ceph object: BlueStore. Adding an
extra scenario might seem like a useless duplication however the
ultimate goal is remove the other roles later. Thus this is easier to
add new role instead of modifying existing one. Once we drop the support
for release older than Jewel we will just remove all the previous
scenario files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Some versions (?) of libvirt provide a 'libvirt' group instead of
'libvirtd'. (Observed with libvirt-daemon-1.2.17-13.el7_2.2.x86_64.)
This makes the RBD client directory owner and group configurable to
allow for this.
this is to allow ceph-authtool to read and write to /var/ and /etc on CentOS Atomic.
Add doc on how to run containerized deployment on RHEL/CentOS Atomic
Signed-off-by: Huamin Chen <hchen@redhat.com>
This would allow users who don't know what interface to provide to
give an IP address to use for the monitor instead.
Note: the includes are needed in ceph.conf.j2 because without them
jinja2 can not properly evaluate the template and will complain about a
missing 'ansible_interface' variable. The includes allow the template to
be evaluated correctly and then the correct include will be used during
render time.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since we want to activate the OSD when it's a partition we are looking
for a return code that is equal to 0 which means the device is a
partition.
closes: #636
Signed-off-by: Sébastien Han <seb@redhat.com>
* `/var/run/ceph/rbd-clients` is not created automatically
* because it is missing, ceph-rgw complains about missing client
socket on start up; it is because the containing directory is
not there
* so we just add it to the list of directory pre-requisite
* the client-name is actually `rgw.{{ ansible_hostname }}` instead
of just `{{ ansible_hostname }}`
* it matches the directory created under `/var/lib/ceph/radosgw`
* and, it matches the client-name used to create the keyring in
`pre_requisite.yml`
Currently we don't yet support runnings OSDs w/ selinux in
enforcing mode. Thus its better to ensure that ceph-ansible
explicitly makes selinux permissive. This should help in
scenarios such as hyperconverged where OSDs are colocated
with VMs on compute nodes which needs selinux enforcing, but
OSDs don't.
Signed-off-by: Deepak C Shetty <deepakcs@redhat.com>
Where it was located before meant it might be skipped if you don't run
tasks with the package-install tag. This fixes the situation where you
want to configure an rhcs node, but do not want to do any package
installs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When installing RHCS there is an option to install from distro provided
packages, this commit modifies the check to allow that to happen.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
changing the name of the directory causes issues with git subtree which
will create new commits. Creating a symlink for vagrant to be happy.
Signed-off-by: Sébastien Han <seb@redhat.com>
in order to have a build on the galaxy we need to have a proper
dependency set for ceph-common. On the galaxy ceph-common does not
exist, only ceph.ceph-common is available.
Signed-off-by: Sébastien Han <seb@redhat.com>
this commit introduces the ability to use fqdn for mon/mds name while
generation the ceph.conf file from the template.
Simply turn mon_use_fqdn and or mds_use_fqdn to true to use FQDN.
Signed-off-by: Sébastien Han <seb@redhat.com>
This adds a script, generate_group_vars_sample.sh, that generates
group_vars/*.sample from roles/ceph-*/defaults/main.yml to avoid
discrepancies between the sets of files. It also converts the line
endings in the various main.yml from DOS to Unix, since generating the
samples was spreading the line ending plague around to more files.
0644 should never be a directory mode. 1777 makes it so that any user
can create a ceph client, not just root. (This is helpful if, for
instance, nova-compute is running as non-root.)
Previously, creating pools was skipped if cephx was disabled; instead,
we should only skip key creation if cephx is disabled, and create
pools any time openstack_config is true.
If using another method to generate a consistent fsid, then we can
skip creation of an (unused) cluster UUID file. If cephx is disabled
as well, we can skip creation of the fetch directory entirely.
Skip a number of ceph keyring-related tasks (or remove the keyring
portion of some tasks) when cephx is disabled. Specifically, avoid
generating the initial keyring, which only clutters up the ansible
repo if cephx is not in use.
This commit allows you to set a new variable to 'true' if you want to
have ceph admin key copied over different kind of hosts such as MDS,
OSD, RGW. To enable this just set `copy_admin_key` to true.
Closes: #555
Signed-off-by: Sébastien Han <seb@redhat.com>
When autodiscovering disks, disks can be skipped if either they are
removable, or if they have partitions on them. Skipped actions have no
'rc' attribute, though, so the 'ceph prepare' conditional fails unless
we first check to ensure that the results were not skipped before
checking the return value.
The firewall checks can fail for any number of reasons -- e.g., the
ceph cluster hostnames are unresolvable from the ansible host, or the
ports are filtered by some intermediate hop, etc. Make two changes to
make those checks better:
* Set pipefail when running the checks, so if nmap itself fails the
command will be marked as 'failed'. Specifically, this fixes the
case where the hostnames cannot be resolved.
* Add a new variable, check_firewall, which can be used to disable
checks entirely. Specifically, this fixes the case where some
intermediate firewall filters the ports, so nmap returns "filtered".
If cephx is set to false, the "set keys permissions" task fails with:
file ({# ceph_keys.stdout_lines #}) is absent, cannot continue
This skips that step when cephx is false.
Installs on RHEL with ceph_origin set to distro previously would fail
because no packages would get installed, but all of the checks passed
fine. This adds support for ceph_origin: distro, simply installing the
packages using yum/dnf and assuming that the sysadmin has provided a
repository containing them.
This also supports the use case where Satellite or a similar local
mirror is in use, and the admin does not or cannot use the additional
repositories the role would otherwise add.
The purpose of this is so we can connect to the mons and gather the keys
needed to configure an OSD or additonal MON without having to reconfigure
the existing mons at the same time.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
In our use case we might only be configuring mons and not osds in the
same call, so we don't want to check variables needed for osds when they
are not needed to configure a mon.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
as stated in https://github.com/ansible/ansible/issues/4297
if we register a variable twice and even if a task is skipped the
register will not get overwritten... So we use the fact variant as
mentionned in the ansible issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
While this is not widly used (AFAIK :p) the feature was broken. Thanks
to @zmc for reporting it. You can now set `osd_auto_discovery` to
true in your group_vars/osd and it will go through all the devices
available and will make them OSDs.
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently deploying a MON fails with "bad symbolic permission for mode"
errors due to the file/directory modes not being interpreted as octal
values. This commit updates roles/ceph-common/tasks/main.yml to set
the file/directory modes to strings so they can be interpreted
correctly.
Closes issue #525
run containerized daemons in virtual machines.
to enable it simply do:
`cp site-docker.yml.sample site-docker.yml`
and set `docker: true` in `vagrant_variables.yml`
Signed-off-by: Sébastien Han <seb@redhat.com>
At the moment, all the tasks using the file module are duplicated to have differents ownerships depending on the fact `is_ceph_infernalis`.
The goal of this commit is to have a new logic for this:
- First set facts depending on the `is_ceph_infernalis` fact
- Create the files or directories using the setted facts as ownerships.
We have a requirement to install the packages first without
configuration. These tags should allow us to target the tasks need to do
that.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
as reported in #510 some systems don't have uuidgen installed so we
better use a more global way to generate it. It sounds like python
should be available in case uuidgen is not.
Otherwise we will have to find another way :)
closes#510
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, all the ceph package installation resources use
"state=latest", which means subsequent runs of the ceph playbooks
could result in ceph being upgraded if there are package updates
available in the selected repo.
This commit adds a new variable to ceph-common called
'upgrade_ceph_packages' which defaults to False. This variable is used
in the package installation resources for ceph packages to determine if
the resource should use "state=present" or "state=latest". If the
variable gets set to True, "state=latest" will be used.
Additionally, we update rolling_update.yml to override
upgrade_ceph_packages to true to permit package upgrades in this
context specifically.
Closes issue #506
It seems that in ansible 2.0 even if a task is skipped by it's `when`
clause not evaluating to true the variables in the play are still
rendered. Because these were not defined in defaults/main.yml ansible
was failing in installs/install_on_redhat where those variables are
being used in a `with_items` stanza.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This change allows for configurable Ceph Conf Directory permissions. This
is required for integrators of Ceph, like OpenStack Cinder, which needs to
read from /etc/ceph for operation.
Use command module instead of shell since we do not do anything fancy
here. Remove the duplicate register.
Signed-off-by: Sébastien Han <seb@redhat.com>
As raised in #466 it is important in order to avoid unnecessary
troubleshooting to check that ceph ports are allowed on the platform.
The check runs a nmap command from the host running Ansible
to all the ceph nodes with their respective ports.
Signed-off-by: Sébastien Han <seb@redhat.com>
Thanks to @cloudnull great patch at
https://github.com/ansible/ansible/pull/12555
we now have the ability to add more configuration options instead of
having to push a PR to add a new option to the template. So you can
dynamically add and remove flags.
To use it, edit `ceph_conf_overrides` in `group_vars/all` like so:
```
ceph_conf_overrides
global:
foo: 12345
bar: 6789
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Because of some permission issue, likely due to the recent ceph user, if
80 is used for civetweb we get:
set_ports_option: cannot bind to 80: 13 (Permission denied)
Changing the port to 8080 until this gets solved.
Signed-off-by: Sébastien Han <seb@redhat.com>
I changed the argument used for starting the mds server. (pre
infernalis)
```
service ceph start mds
```
errors, while
```
service ceph start mds.$hostname
```
correctly starts the service.
I changed the mds directory ownership from ceph:cephh to root:root
again, for pre-infernalis.
And finally, add the ceph_stable_releases checks for the upstart
activation task `for or after infernalis release'.
I have seen a number of failures on this task due to mismatch of
checksum of source file and destination. I suspect this is due to a
race condition caused by several hosts simultaneously copying the same
file to single location on the deployment server.
This change simply updates the 'copy keys to the ansible server' task
by adding 'run_once', which limits the task to being run on a single
MON host.
Closes issue #410
Verify that partitions (for both osd disks and journal disks) are sane
before attempting to prepare the device. Fail if parted fails for
whatever reason.
Closes: #437
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we renamed the variables and removed the old 'docker' variable we
can now collocate container daemons with standard bare metal deployment.
For instance, monitors can be containerized but osds can be deployed
traditionally.
Signed-off-by: Sébastien Han <seb@redhat.com>
It should be used to disable health warnings about number of PGs
being too low if some pools have very few objects bringing down
the average number of objects per pool. This happens when running RadosGW.
The default is 10 and since the warnings only occur with some use cases,
the default here is 10 as well. Set to 20 or more to silence the warnings.
Currently, the fetch directory is created in your working directory
(where ansible is run from). We prefer to not keep any state in this
directory and would prefer to have the fetch directory configurable so
we can store it outside of our code checkout.
This commit creates a new variable in each role called
`fetch_directory` (defaulting to the previous value of 'fetch/'), and
then updates each reference to 'fetch' to use the new variable instead.
Closes issue #383
When multiple monitor hosts attempt to create the fetch directory there
is the potential for the task to fail with:
"OSError: [Errno 17] File exists: 'fetch'"
This appear to be an issue with the file module trying to create the
same directory at the same time when the tasks has been delegated to a
single host.
This commit enables run_once on the affected task which should address
the issue.
This is a rare case but it happens. Since we're just calling
`monitor_interface` and not `hostvars[host]['monitor_interface'],
an error may occur when the current host's interface does not
exist on the other hosts. (eg. eth0 exists for node0, but it does
not exist on node1 and node2)
Fix for this is to use hostvars[host]['monitor_interface']
I'm removing the ceph paritition check from `activate osd(s) when device
is a disk` because the ceph parition does not exist when parted was
registered (on a fresh install). This was causing the activate step to
be skipped.
Currently the OpenStack pools that get created use the default pg_num.
This commit updates the ceph-mon role to allow the pg_num for each pool
to be customised.
Fix back the rolling update playbook.
However every single time the playbook will run it will check for new
packages and install the latest ones. I don't think this is always the
desired behaviour. We need to find a way to conciliate both...
Signed-off-by: Sébastien Han <seb@redhat.com>
Fix the logic for the mandatory devices check so that it applies to
raw_multi_journal and journal_collocation scenarios separately.
This fails otherwise because whichever var is "first" in the or is most
likely undefined.
This will likely one day or another break something. If ceph-disk
complains about a disk just use the purge-cluster.yml playbook first as
it will wipe all the devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
I'm currently getting a KeyError due to missing 'dependencies' on this
role when I attempt to install it with ansible-galaxy (ansible 1.9.2).
This commit simply defines an empty dependencies list so that
ansible-galaxy executes correctly.
Cool stuff :). We don't need to specify an initial monitor key anymore.
A key will automatically be generated.
The default key can always be overriden with the `monitor_secret`
variable.
Signed-off-by: leseb <seb@redhat.com>
We don't always have a dedicated cluster network so we can by default
re-use the public network value.
This is just laziness :).
Signed-off-by: leseb <seb@redhat.com>
While re-running the playbook we do not want to check for new packages.
We shouldn't perform upgrades, we leave this to the operators.
Signed-off-by: leseb <seb@redhat.com>
Prior to this change, the zap was executed during every play, this was
not ideal. Now we do check if there is a 'ceph' partition. If so we skip
the zap.
Signed-off-by: leseb <seb@redhat.com>
Feel so bad about this one...
Now it's fixed, the rgw section will be activated once the rgws hosts
are part of the inventory.
Signed-off-by: leseb <seb@redhat.com>
Even if the subcription command is indempotent it takes around 15/16sec
to get it done. Where with the simple yum check we lower down this to
3sec.
Signed-off-by: leseb <seb@redhat.com>
Since the command is indempotent we don't need to check if the repo is
enabled as it will likely take twice the time.
Signed-off-by: leseb <seb@redhat.com>
We want to force the user to only enable the options they need. Thus
they shouldn't have to enable one option and then disable another.
Signed-off-by: leseb <seb@redhat.com>
Now we don't need to activate the services through a variable. If the
role is activated in the inventory, actions will occur automatically.
Fixing the repo creation for red hat storage too.
Signed-off-by: leseb <seb@redhat.com>
The new product version has jsut came out. ICE doesn't exist anymore and
Red Hat Storage is the name of the new product.
Signed-off-by: leseb <seb@redhat.com>
The logic was broken here for repeated runs. We only want to run
'ceph-disk prepare' when the disk does not contain a ceph partition, is
not a partition, and raw_multi_journal is set. Previously it would
attempt to run 'ceph-disk prepare' when there was a ceph partition
because the second half of the 'or' was still true since it isn't a
partition.
Following the best practice, we don't create a key from the monitor but
we really on the initial keys created by the mons to bootstrap each
daemon.
Signed-off-by: Sébastien Han <seb@redhat.com>
This branch has been sitting on my local repo for a while. I guess I had
time to spend on a plane :).
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
* fix the Vagrantfile ruby check
* fix the variable positions
Bring more mandatory variables and try to separate Vagrant vars from the
playbook vars.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Once again and hopefully final commit to rework the support of both
upstart and sysvinit. As from now, Ubuntu systems will use upstart and
the others will use sysvinit.
A later commit might include the support of systemd as the unit files
come out. This will be for Hammer so probably soon.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Depending on the distro, init scripts will look for different files to
be available on the ceph data dir.
Fixing the upstart support here.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
If the distribution wasn't Ubuntu, the check wasn't performed so the
evaluation in the task later wasn't possible.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Now the Ceph REST API can be deployed.
Default implementation deploys it on the same nodes as the monitors
which should be fine.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Fix the usage of Upstart for Ubuntu machines instead of the init.d
script.
Note that because of the way upstart init script looks at the radosgw id
the command 'start radosgw id=' is broken, you should use 'start
radosgw-all' instead.
Keep backard compatibility with the radosgw init script as well by using
client prefixed by 'client.radosgw'.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
The ceph fs new command was introduced in Ceph 0.84. Prior to this
release, no manual steps are required to create a filesystem, and pools
named data and metadata exist by default.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
If we use the hostname, the radosgw will lookup for a wrong secret.
Using the same name for all the gateways.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Use hostname in socket and log.
Improve jinja template so when a var doesn't exist we don't indent the
next line.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
We isolated the key operations into a file and modified the fetch
function to collect all the new keys.
In the mean time fixed the pool creation since the command is not
indempotent.
Renamed the rgw key to work with the key collection.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Without this plugin if a Ceph version is present in a repo (let's say
epel) it will install the epel version and not the ICE version.
We install yum-plugin-priorities.noarch to honor the 'priority=1' flag.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
In storage world it's often recommended to disable transparent hugepages
as they will tend to lower performance.
Note that this change won't survive reboot. There are several ways to
disable this permanently such as:
* rc.local
* grub boot line
It's a bit tricky to do this in Ansible since it really depends on the
OS you're running on.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Default behavior is to fail if a variable is not declared however this
can be disable in your ansible.cfg so we force this variable as
mandatory.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Still WIP, @mwheckmann free to test
As requested by #162
Current known issue, since ceph.conf gets modified during every single
run (at the end during the merge) so this will restart ceph daemons.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Depending on the OS you are runnning on you should be able to configure
these values.
Re-ordering file for clarity as well.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Big cluster will easily reach the default limit so we need to increase
it and make it configurable.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
We remove all the partitions, label and re-create something clean prior
to prepare the design. This will help solving many issues with existing
disks or while scratching/deploy test environments often.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
MDS and RGW are not deployed often (RGW more), so we disable them from
the default deployment to only get MONs and OSDs.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
With the appropriate subscription details you will be able to use the
Inktank Ceph Enterprise version of Ceph running on RHEL7.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
It has becomes really anoying to manually generate an fsid prior to the
inital bootstrap. This commit introduces a method that auto-generates an
fsid. If for whatever reasons you want to force your own fsid you can
simply edit these 3 files and override the fsid variable:
- roles/ceph-common/vars/main.yml
- roles/ceph-mon/vars/main.yml
- roles/ceph-osd/vars/main.yml
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
- We don’t need ceph-extra for trusty
- Enable multiverse repo for access to libapache2-mod-fastcgi
- Update cache before attempting to install packages to register
multiverse repo and only refresh cache once an hour to avoid delays in
the playbook
- Add wildcard to disabling default site as on Ubuntu it is 000_default
by…default
While running big boxes with 72 disks it's easy to get out of PID for
all the threads needed by Ceph. Increasing the default value removes
this limitation.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
In ceph-common you load {{ ansible_managed }} at the top of the main
config file - this will trigger handlers on that file whenever an
Ansible run is made.
I'd suggest replacing it with a vanilla text comment 'managed by
Ansible' to warn
admins but avoid unnecessary cluster bounces.
fixes: #125
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
The ceph.conf.j2 template currently always uses the current host facts
to get the IP address of each host in the mon loop. This is not the
expected behavior. This patch uses the correct facts to get the IP.
Recovery and/or re-balancing decrease performance, adding more options
might help tweaking this behavior.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Since 192.168.0.0/24 is very commong and might overlap with some
existing networks on your laptop, using another subnet like '42' is less
bound to happen.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Proviously we used osd_crush_update_on_start: true, this was interpreted
by Ansible as a boolean and appeared as 'True' inside the Ceph configuration
file. However the Ceph's init script is looking for 'true'.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This commits introduces the support of the developpement branches of
Ceph. You can now install Ceph from master.
The behavior is done through 2 new options:
* ceph_stable: true will use the stable branch
* ceph_dev: true will use the dev branch
For the dev packages don't forget to set the branch that you want to
use.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Prior to this patch, the first match was winning and the playbook wasn't
doing any difference both "restart ceph", adding a distro filtrer fixes
this.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
It has been reported a couple of months ago by Dan van der Ster from
CERN that updatedb was consumming 100% of CPU while parsing system's
directories. Indeed the process was parsing the OSD PG directories that
might contains billions of objects.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
After a change is made on the configuration file we must restart the
Ceph services. I also added a check that verifies if a socker exists
because during the first play there are no services running. We check if
a socket exists, if not we don't try to restart the services, if it
exists we can restart them.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
I added a 'ceph-' prefix to all the roles related to Ceph. Since we are
about to push the roles into the Ansible Galaxy that will be easier when
we want to use these roles into a larger environement with other roles.
Fixes: #94
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This commit implements a fourth scenario where we can directely use a
directory instead of a block device for the OSDs. The purpose of this
scenario is more testing-oriented. Please note that we do not check
the filesystem underneath the directory so it is really up to you to
configure this properly. Declaring more than one directory on the
same filesystem will confuse Ceph.
Fixes: #14
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This commit introduces a new config option 'osd crush chooseleaf type'.
With the help of this option and by setting it to '0' we tell Ceph to
store all the replicas on a single host. Basically we tell CRUSH to
iterate over disk and not over host.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
since we're now using fsid for the directory name, it should be safe to
just copy the keys from all mon hosts. Once they are copied, the rest of
the hosts will just skip copying. :)
The mon_initial_members is not used since we declare the mon section in
the ceph.conf file. Later, we could reduce the ceph.conf file by only
using the mon_host flag instead of all the mon sections.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
We introduced a key generation mechanism that aimed to ease deployment.
In the end, it brought more complexity to the playbook and doesn't
scale.
Reverting the auto generation commit and instructing users to generate
their own keys.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Currently everything lives in main.yml, the file has become difficult to
read at some point and can be a real mess since we keep adding new
scenarios.
I think we should separate the scenarios into dedicated files and just
do includes in the main.yml file.
Closes: #16
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
As mentionned in the issue 24 it's not really safe to store a default
fsid nor a monitor key. Thus the commit brings the auto-generation of
the initial monitor key. However it is quite complex to do the same for
the fsid, so I leave this to the person in charge of the deployment to
generate one and edit group_vars/all accordingly. The default fsid has
been removed as well.
Close: #24
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Even if MDS are not configured in site.yml the playbook has a
dependancy on the ceph.conf template.
This disables the mds section from the ceph.conf file.
Closes: #21
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Now the playbook is able to install Ceph on RedHat systems.
This has been tested on CentOS 6.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This commits brings the support of multiple journals where each journal
points to a specific OSD and vice-versa. The commit also clarifies the
usage of multi scenarios for both journal and osd_data.
In the meantime, it fixes the collocation scenario.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This brings the support of heterogeneous hardware. Not all the servers
are identical, some have more or less disks than the others. Prior this
commit, the 'parted' command was hanging, now the command simply exits 1
if the device doesn't exist, same for the 'egrep' piped command after.
Then we skip these errors and continue to run. So now, you can specify
multiple devices in group_vars/osds that don't exist on all the
servers.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Since the fetch module takes care of the permissions it is not necessary
to set them with another module. The second command is useless.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Sébastien Han
Andrew Schoen
Guillaume Abrioux
Chris Wells
tynorth-cisco
Andrew Schoen
Logan V
Musee Ullah
Daniel Marks
Ken Dreyer
Shengjing Zhu
Davide Belloni
Alfredo Deza
Casey Bodley
Jirayut Nimsaeng
Ivan Font
James Saint-Rossy
Alberto Murillo Silva
Eduard Egorov
Adam Huffman
Gunwoo Gim (a.k.a. Nicho1as)
Adam Huffman
Simon Weald
9seconds
suuuper
Musee Ullah
OrFriedmann
Patrick Donnelly
Proskurin Kirill
Paulo Matias
Patrick Donnelly
Ivan Font
Daniel Gryniewicz
asbishop
Christoph Dwertmann
Daniel Lin
Martin Bukatovic
Alexey Sheplyakov
Chengwei Yang
Kalle Happonen
pprokop
KGoreczny
Erik Hollensbe
Austin Brown
Huamin Chen
Matthew Rees
Jim Curtis
David C Wang
Tino Schmeier
Sam Yaple
Marcus Pamelia
Samuel Matzek
Stephan Hohn
Li Peng
Matt Thompson
Ivo Jimenez
Chris St. Pierre
Ben England
pprokop
Kyle Squizzato
ksingh7
runsisi
Jim Curtis
K.C. Wong
Deepak C Shetty
François Charlier
Derek Anderson
Zack Cerza
Niklas Haas
mcsage
Byron McCollum
crcceph
Abhishek Varshney
Eric Cook
Bjoern Teipel
Eike Frost
Sébastien Han
Michael Sambol
Bill Sanders
Emilien Mantel
Marc Heckmann
Timo Beckers
dexter
git-harry
Abhishek Varshney
Andy McCrae
Michael Sambol
Andrew F. Ly
Bryan Stillwell
Bjørnar Ness
Sébastien Han
Yin Jifeng
marmot21
Boris Manojlovic
Igor Shestakov
Cornelius Keller
Gauvain Pocentek
jjoos
Ramón Cahenzli
Piotr Bak
Alexis Lahouze
eltom
Kyle Christensen
Dexter John Genterone
Hunter Nield
Alessandro Corbelli
Jimmy Tang
Alfredo Deza