This is needed by ceph-exporter as it is parsing the socket by the number of dots.
Although the rgw_zone variable is only using for constructing the client name
and has nothing to do with multisiting.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
keep the ceph.conf very simple.
manage the common options such as `public_network` with `ceph_config`
module.
Signed-off-by: Guillaume Abrioux <gabrioux@ibm.com>
We already support specifiying a custom crush rule during pool creation
in ceph-osd role but not in ceph-rgw role.
This patch adds the missing code to implement this feature.
Note this is only available for replicated pool not erasure. The rule
must also exist prior the pool creation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1855439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
1/ The OSD already supports cpuset to be used for containerized deployments
through the use of the ceph_osd_docker_cpuset_cpus variable. This adds similar
support to the RGW service for containerized deployments by setting a new
variable named ceph_rgw_docker_cpuset_cpus. Like the OSD, there are times where
using distinct cores has advantages over using the CFS in kernel scheduler.
ceph_rgw_docker_cpuset_cpus accepts a comma delimited set of CPU ids
2/ Add support for specifying --cpuset-mem variable to restrict the cgroup's memory
allocations to a particular numa node, which should typically correspond with
the cpu ids of that numa node that were provided with --cpuset-cpus. To ensure
the correct cpu ids are used one can run `numactl --hardware` to list the nodes
and which cpu ids correspond to each.
Signed-off-by: Kyle Bader <kbader@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
ee2d52d33d missed this sync between
ceph-defaults/defaults/main.yml and group_vars/all.yml.sampl
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
You can now use RGW_ZONE and RGW_ZONEGROUP on each rgw host from your
inventory and assign them a value. Once the rgw container starts it'll
pick the info and add itself to the right zone.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1551637
Signed-off-by: Sébastien Han <seb@redhat.com>
Less configuration for the user, the container inherit from the global
variables. No more container specific variables.
Signed-off-by: Sébastien Han <seb@redhat.com>
This patch adds passing the RGW_CIVETWEB_IP to the docker
container. This IP defaults to the value of radosgw_civetweb_bind_ip.
radosgw_civetweb_bind_ip default to ipv4.default
Without this value, the RGW containter will bind to 0.0.0.0
Resolves issue: Multiple RGW Ceph.conf Issue #1258
In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.
Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com
Modified ceph-defaults and ran generate_group_vars_sample.sh
group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.
Uncommented added variables in ceph-defaults
Updated tests by adding value for radosgw_interface
Added radosgw_interface to centos cluster tests
Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh
In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
ceph services can fail to start under certain circumstances (for
example, when running in a container) because the default systemd
service configuration causes namespace issues.
To work around this we can override the system service settings by
placing an overrides file in the ceph-<service>@.service.d directory.
This can be generic so as to allow any potential changes required to
the ceph-<service> service files.
The overrides file is only setup when the
"ceph_<service>_systemd_overrides" config_template override variable is
specified.
The available service systemd override files are as follows:
ceph_mds_systemd_overrides
ceph_mgr_systemd_overrides
ceph_mon_systemd_overrides
ceph_osd_systemd_overrides
ceph_rbd_mirror_systemd_overrides
ceph_rgw_systemd_overrides
The keys and openstack_keys structure now supports an optional
key called acls whose value is a list of strings one could pass
to setfacl. The ansible ACL module applies the ACLs to all
openstack keys with this property.
Fixes: #1688
Add a new parameter `admin_secret` that allow to deploy a ceph cluster
with a custom admin secret.
Fix: #1630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add an extra variable to the openstack pools, which creates them with
defined rules. This will allow to place different pools on e.g.
different type of disks.
This commit will also set a new default rule when defined and move
the rbd pool to the new rule.
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
At some point, during a commit changing `roles/ceph-rgw/defaults/main.yml`
we forgot to run `generate_group_vars_sample.sh`.
Signed-off-by: Sébastien Han <seb@redhat.com>
Change civetweb_num_thread default to 100
Add capability to override number of pgs for
rgw pools.
Add ceph.conf vars to enable default bucket
object quota at users choosing into the ceph.conf.j2
template
Resolves: rhbz#1437173
Resolves: rhbz#1391500
Signed-off-by: Ali Maredia <amaredia@redhat.com>
This was needed for Hammer and older version, not needed anymore since
we have a 'ceph' user to run ceph processes.
Signed-off-by: Sébastien Han <seb@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit re-uses some of the existing ceph-ansible variables for a
containirzed deployment. There is no reasons why we should add new
variables for the containerized deployment.
Signed-off-by: Sébastien Han <seb@redhat.com>
Seena Fallah
Guillaume Abrioux
Dimitri Savineau
Guillaume Abrioux
Ali Maredia
Kyle Bader
Neha Ojha
Sébastien Han
jtudelag
Keith Schincke
SirishaGuduru
Andy McCrae
John Fulton
Christian Zunker
Chris Wells