ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there's no need to add each rgw section on all rgw nodes.
With this commit, only related rgw section are rendered.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This option has been deprecated (As of 0.51).
By the way, ceph-ansible already sets the
auth_{service,client,cluster}_required variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When no monitor group is present in the inventory, this task fails.
This affects only non-containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
The "run 'ceph-volume lvm batch --report' to see how many osds are to be
created" and "run 'ceph-volume lvm list' to see how many osds have already been
created" statements only register the lvm_batch_report and lvm_list variables.
Running those ceph-volume commands should never produce a change on the system.
Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
This is necessary when configuring RGW with SSL because
in addition to passing specific frontend options, civetweb
appends the 's' character to the binding port and beast uses
ssl_endpoint instead of endpoint.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1722071
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, if you set `ms bind ipv6 = True` you must explicitly set
`ms bind ipv4 = False` too, otherwise OSDs will still try to pick up an
IPv4 address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710319
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
`ceph_release` is set in `ceph-container-common` but this role is
played only on first node for clients, this means ceph-config will fail
on all client nodes except the first one.
This commit ensure ceph_release is set for all client nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling msgr2 style declaration for Nautilus and above. Prior releases
will keep the right syntax.
When upgrading from Mimic to Nautilus we must maintain something in the
form of:
mon_host = [v1:127.0.0.1:6789/0,v2:127.0.0.1:3300/0]
Signed-off-by: Sébastien Han <seb@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This part of the code is not needed since ceph-ansible@master is
intended to deploy ceph@master only.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to create the directories on non-containers, they are
created by the packages.
Closes: https://github.com/ceph/ceph-ansible/issues/3430
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph.conf doesn't accept float value.
Typical error seen:
```
$ sudo ceph daemon osd.2 config get osd_memory_target
Can't get admin socket path: unable to get conf option admin_socket for osd.2:
parse error setting 'osd_memory_target' to '7823740108,8' (strict_si_cast:
unit prefix not recognized)
```
This commit ensures the value inserted in ceph.conf will be an integer.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Ali Maredia
Artur Fijalkowski
Kevin Coakley
Giulio Fidente
L3D
Rishabh Dave
Andrew Schoen
John Fulton
Zack Cerza
Sébastien Han
guihecheng
Neha Ojha