In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The current ganesha log directory is only present in the container
and not bind mount on the host.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
At the moment, we bindmount the dbus socket from the host, this requires
to run the container with --privileged.
Since we now run a dedicated dbus daemon inside the same container, we
can stop running privileged nfs-ganesha containers
Related ceph-container PR : ceph/ceph-container#1517
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1725254
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Depending on the infrastruture (w/o kerberos auth) then the SecType
value could be different.
Currently this value is hardcoded in the NFS Ganesha template. Instead
we can use a variable.
The default value is still the same to avoid breaking the backward
compatibility.
Closes: #4459
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
instead of using `RuntimeDirectory` parameter in systemd unit files,
let's use a systemd `tmpfiles.d` to ensure `/run/ceph`.
Explanation:
`podman` doesn't create the `/var/run/ceph` if it doesn't exist the time
where the container is run while `docker` used to create it.
In case of `switch_to_containers` scenario, `/run/ceph` gets created by
a tmpfiles.d systemd file; when switching to containers, the systemd
unit file complains because `/run/ceph` already exists
The better fix would be to ensure `/usr/lib/tmpfiles.d/ceph-common.conf`
is removed and only rely on `RuntimeDirectory` from systemd unit file parameter
but we come from a non-containerized environment which is already running,
it means `/run/ceph` is already created and when starting the unit to
start the container, systemd will still complain and we can't simply
remove the directory if daemons are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
/var/run/ceph resides in a non persistent filesystem (tmpfs)
After a reboot, all daemons won't start because this directory will be
missing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When 'ceph_nfs_disable_caching' is set to True, disable attribute
caching done by Ganesha for all Ganesha exports.
Signed-off-by: Ramana Raja <rraja@redhat.com>
Useful for softwares that do data collection/monitoring like collectd.
They can connect to the socket and then retrieve information.
Even though the sockets are exposed now, I'm keeping the docker exec to
check the socket, this will allow newer version of ceph-ansible to work
with older versions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1563280
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a variable, ceph_nfs_disable_caching, that if set to true
disables ganesha's directory and attribute caching as much as
possible.
Also, disable caching done by ganesha, when 'nfs_file_gw'
variable is true, i.e., when Ganesha is used as CephFS's gateway.
This is the recommended Ganesha setting as libcephfs already caches
information. And doing so helps avoid cache incoherency issues
especially with clustered ganesha over CephFS.
Fixes: https://tracker.ceph.com/issues/23393
Signed-off-by: Ramana Raja <rraja@redhat.com>
* DBus on host should include ganesha service file
* to allow ganesha container to respond on DBus it needs to run
in --privileged mode (ganesha folks contacted to look at this)
* ceph_nfs_include_exports_dir variable replaced with more general
ceph_nfs_dynamic_exports
- Change capitalization of config options to be
in line with what config.txt in the nfs-ganesha
tree says
Signed-off-by: Ali Maredia <amaredia@redhat.com>
In analogy to ceph_nfs_rgw_user, we should be able to define a user
with which the nfs-ganesha Ceph FSAL connects to the cluster.
Introduce a ceph_nfs_ceph_user variable, setting its default to
"admin" (which preserves the prior behavior of always connecting as
client.admin).
Fixes#1910.
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This option was missing for rrgw, mds, rbd mirror and nfs making these
daemon impossible to run on a kv deployment with containers.
Signed-off-by: Sébastien Han <seb@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes#845 for containerized deployments. We now also mount the
/etc/localtime volume in the containers in order to synchronize the host
timezone with the container timezone.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Ceph has the ability to export it's filesystem via NFS using Ganesha.
Add a ceph-nfs role that will start Ganesha and export the Ceph
filesystems.
Note that, although support is going in to export RGW via NFS, this is
not working yet.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Rishabh Dave
Sébastien Han
Michel Rode
Ramana Raja
Jan Provaznik
Ali Maredia
Florian Haas
Tobias Florek
Andrew Schoen
Daniel Gryniewicz
Ivan Font