ceph_stable_release is a legacy from the time where a single branch of ceph-ansible supported more than one release of ceph
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit fb99626987)
Because the ceph container images are now only pushed to the quay.io
registry then this updates the default registry value.
The docker.io registry can still be used but doesn't receive updated
container images.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e7b43c1fc6)
It restricts access to the iSCSI API.
It can be left empty if the API isn't going to be access from outside the
gateway node
Even though this seems to be a limited use case, it's better to leave it
empty by default than having a meaningless default value.
We could make this variable mandatory but that would be a breaking
change. Let's just add a logic in the template in order to set this
variable in the configuration file only if it was specified by users.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1994930
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 6802b8dddd)
The radosgw-sync-overview and rbd-details grafana dashboars were missing
from the list.
Closes: #6758
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f0ccf3ebf0)
When using self-signed/untrusted CA certificates, alertmanager displays
an error in logs. With this commit this should make those messages
disappear.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1936299
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9f77b929d1)
This introduces a new variable `dashboard_network` in order to support
deploying the dashboard on a different subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1927574
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f4f73b6197)
This is a partial backport of 2547ab60.
We are currently installing the ceph-mgr-dashboard package even if the
dashboard_enabled variable is set to false.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already have config override variables for existing block (like
ganesha_ceph_export_overrides, ganesha_log_overrides, etc...) or a
global one (ganesha_conf_overrides) but redefining the NFS_CORE_PARAM
block in that variable will erase all previous values (currently only
Bind_Addr).
ganesha_core_param_overrides: |
Enable_UDP = false;
NFS_Port = 2050;
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1941775
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9817d29543)
The alertmanager, grafana and prometheus configuration file are
generated with the template module which doesn't allow for using
config overrides.
Instead we could use the config_template plugin action and add a
new variable for overrides (one for each component).
With this patch, one should be able to add configuration to
prometheus with the following:
---
alertmanager_conf_overrides:
global:
smtp_smarthost: 'localhost:25'
...
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902999
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5a41026347)
When deploying dashboard with ssl certificates generated by
ceph-ansible, we enforce the CN to 'ceph-dashboard' which can makes
application such alertmanager complain like following:
`err="Post https://mgr0:8443/api/prometheus_receiver: x509: certificate is valid for ceph-dashboard, not mgr0" context_err="context deadline exceeded"`
The idea here is to add alternative names matching all mgr/mon instances
in the certificate so this error won't appear in logs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1978869
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 72a0336c71)
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9758e3c513)
Enabling lvmetad in containerized deployments on el7 based OS might
cause issues.
This commit make it possible to disable this service if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955040
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When dashboard_frontend_vip is provided, all the services should be
configured using the related VIP. A new VIP variable is added for
both prometheus and alertmanager: we're already able to properly
config the grafana vip using dashboard_frontend_vip variable.
This change adds the same variable for both prometheus and
alertmanager.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit 441651638d)
Currently NFS Ganesha (ceph-nfs) consumes /etc/idmapd.conf, which
controls mapping of user/owner identities under NFSv4+. With
containerized service deployment, this file is an immutable part of the
container image and cannot be modified.
Here we provide group variables, and a taskk and templates for the
ceph-nfs role, to set the path of the idmap configuration file and
to make the most common adjustment to the contents of that file --
namely to set the 'Domain'. We default the path to /etc/ganesha/idmap.conf
so that we will not conflict with /etc/idmapd.conf on the controller nodes
where ganesha runs. NFSv4 clients, as used for example by the Cinder NFS
driver, consume /etc/idmapd.conf and may require different settings than
what is wanted for NFS Ganesha. Additionally, because we already bind
/etc/ganesha from the host into the ceph-nfs container, the file NFS
Ganesha consumes will no longer be an immutable part of the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925646
Signed-off-by: Tom Barron tpb@dyncloud.net
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2db2208e40)
This commit adds the parameter `--storage.tsdb.retention.time` to the
prometheus systemd unit template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1928000
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b60c61ce45)
This add a quick documentation in ceph-defaults about `igw_network`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c5728bdc63)
This adds the possibility to deploy the dashboard with igw nodes using
a dedicated subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1926170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c33de174f1)
This converts some missed calls to `ansible_*` that were missed in
initial PR #6312
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0163ecc924)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
http://docs.ceph.com/docs/nautilus/radosgw/frontends/ 404s so replace
it with a working "latest" docs link, and correct the spelling of
"additional" while I'm at it.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 847611048e)
The current dashboard images deployed have a bad health index.
Updating to a newer version fixes this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925350
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a16ae693d8)
This reverts commit 4d1fdd2b05.
This breaks the backward compatibility with previous osd_memory_target
calculation and we could have a value lower than the minimum value allowed
(896M) which causes some ceph commands to fail (like ceph assimilate-conf).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit aa6e1f20ea)
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 900c0f4492)
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 483adb5d79)
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 4d1fdd2b05)
This sets the `dashboard_grafana_api_no_ssl_verify` default value
according to the length of `dashboard_crt` and `dashboard_key`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5cadfea42e)
There's no need to define a variable via a fact if we can do it via a
default value. Using a fact could be interesseting to override the
default value on some condition.
- ceph_uid could be set to 167 by default because it's only different on
non containerized deployment on Debian/Ubuntu.
- rbd_client_directory_{owner,group,mode} could be set to ceph,ceph,0770
by default install of null as we are doing in the facts.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1875058
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7f997e623a)
When using a http(s) proxy with either docker or podman we can rely on
the HTTP_PROXY, HTTPS_PROXY and NO_PROXY environment variables.
But with ansible, even if those variables are defined in a source file
then they aren't loaded during the container pull/login tasks.
This implements the http(s) proxy support with docker/podman.
Both implementations are different:
1/ docker doesn't rely en the environment variables with the CLI.
Thos are needed by the docker daemon via systemd.
2/ podman uses the environment variables so we need to add them to
the login/pull tasks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1876692
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bda3581294)
We were only supporting CentOS 8 for containerized deployment.
Since Nautilus 14.2.10 we now have el8 rpm packages so we should be
able to deploy a nautilus ceph cluster with el8.
Note that the nfs-ganesha isn't supported because there's no el8 rpm
packages for nfs-ganesha V2.8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since there is a check if ceph_custom_key is defined, there is no reason
to define it by default.
Signed-off-by: Rafał Wądołowski <rwadolowski@cloudferro.com>
(cherry picked from commit 55cd6e83e4)
This commit also remove the notify on new added debian repo,
force update_cache to yes and define sample ceph_custom_key vars.
Signed-off-by: Anthony Rusdi <33247310+antrusd@users.noreply.github.com>
(cherry picked from commit 4c592066b7)
We already support specifiying a custom crush rule during pool creation
in ceph-osd role but not in ceph-rgw role.
This patch adds the missing code to implement this feature.
Note this is only available for replicated pool not erasure. The rule
must also exist prior the pool creation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1855439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cb8f0237e1)
ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 448cc280b7)
This is needed to get a TLS certificate to validate correctly.
If unspecified, auto-detected grafana_server_addr is used.
Signed-off-by: Paulo Matias <matias@ufscar.br>
(cherry picked from commit 38ce02c2ea)
When using TLS on the ceph dashboard or grafana services, we can provide
the TLS certificate and key.
Those files should be present on the ansible controller and they will be
copyied to the right node(s).
In some situation, the TLS certificate and key could be already present
on the target node and not on the ansible controller.
For this scenario, we just need to copy the files locally (on each remote
host).
This patch adds the dashboard_tls_external variable (with default to
false) to allow users to achieve this scenario when configuring this
variable to true.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860815
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0d0f1e71df)
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 829990e60d)
When using an untrusted TLS certificate (like self-signed) on grafana
then the grafana dashboards update subcommand will fail.
One solution could be to trust the TLS certificate.
The other one is to disable the TLS verification on the grafana API.
Closes: #5324
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b20519efd0)
this commit removes the task which enable application on cephfs pools.
See: https://tracker.ceph.com/issues/43761Fixes: #5278
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 86dc6f8206)
The latest Ceph stable release is now Octopus so the "latest" container
image tag is pointing to Octopus and not Nautilus anymore.
This commit updates the ceph_docker_image_tag with "latest-nautilus".
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Support for debian with RHCS has been dropped starting RHCS 4
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4ac99223b2)
This is no longer true, let's remove this comment given that this option
is not ignored in containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e551b5ba1a)
In fc02fc9 the group_vars samples have been generated but only for
monitor_address variable not radosgw_address.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b46839bad0)
Guillaume Abrioux
Seena Fallah
Dimitri Savineau
Francesco Pantano
Alex Schultz
Matthew Vernon
Gaudenz Steinlin
Rafał Wądołowski
Anthony Rusdi
Paulo Matias