On containerized CI jobs the playbook executed is purge-cluster.yml
but it should be set to purge-docker-cluster.yml
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd0869cd01)
As of testinfra 2.0.0, the binary name is `py.test`.
But let's pin the version to 1.19.0.
Indeed, migrating to 2.0.0 requires our current testing to be reworked a bit.
Since we don't have the bandwidth ATM for this, it's better to simply
keep testing with testinfra 1.19.0.
Note that I've replaced all `testinfra` occurences by `py.test` anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b42250332a)
Since we deploy > purge > deploy the LVs are gone so we much recreate
them.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 656fbd2901)
- reintroduce `purge_cluster_container` and `purge_cluster_non_container`
on `stable-3.2`,
- remove all purge scenario based on ceph-disk,
- remove purge_lvm_osds_* scenarios.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding this rule on the hypervisor will allow cluster to talk to each
other.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 96ce8761ba)
we must apply this playbook before deploying the secondary cluster.
Otherwise, there will be a mismatch between the two deployed cluster.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3d8f4e6304)
Add a playbook that will upload a file on the master then try to get
info from the secondary node, this way we can check if the replication
is ok.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will setup 2 cluster with rgw multisite enabled.
First cluster will act as the 'master', the 2nd will be the secondary
one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we are removing the ceph-disk test from the ci in master then
there is no need to have the functionnal tests in master anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
the line setting `ANSIBLE_CONFIG` obviously contains a typo introduced
by 1e283bf69b
`ANSIBLE_CONFIG` has to point to a path only (path to an ansible.cfg)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding testing scenarios for day-2-operation playbook.
Steps:
- deploys a cluster,
- run testinfra,
- test idempotency,
- add a new osd node,
- run testinfra
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of now, we should no longer support Jewel in ceph-ansible.
The latest ceph-ansible release supporting Jewel is `stable-3.1`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit does a couple of things:
* Avoid code duplication
* Clarify the code
* add more unit tests
* add myself to the author of the module
Signed-off-by: Sébastien Han <seb@redhat.com>
Using `UPDATE_*` environment variables here will make an upgrade of the
ceph release when running switch_to_containers scenario which is not
correct.
Eg:
If ceph luminous was first deployed, then we should switch to ceph
luminous containers, not to mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The copy module does in fact do variable interpolation so we do not need
to use the template module or keep a template in the source.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Using an explicitly named testing environment name allows us to have a
specific [testenv] block for this test. This greatly simplifies how it will
work as it doesn't really anything from the ceph cluster tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Let's create a dedicated environment for these scenarios, there is no
need to deploy everything.
By the way, doing so will save some times.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`test_rbd_mirror_is_up()` is failing on update scenarios because it
assumes the `ceph_stable_release` is still set to the value of the
original ceph release, it means it won't enter in the right part of the
condition and fails.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to ceph/ceph-build#1082
Let's set the ansible version in each ceph-ansible branch's respective
requirements.txt.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since no latest-bis-jewel exists, it's using latest-bis which points to
ceph mimic. In our testing, using it for idempotency/handlers tests
means upgrading from jewel to mimic which is not what we want do.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should test ceph-ansible against the latest ansible stable version on
master.
This commit also remove the pinning to 1.7.1 version of testinfra
because ansible 2.5 requires a newer version.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
that may be helpful to know why a test has been skipped.
from pytest doc:
```
-r chars show extra test summary info as specified by chars
(f)ailed, (E)error, (s)skipped, (x)failed, (X)passed,
(p)passed, (P)passed with output, (a)all except pP.
Warnings are displayed at all times except when
--disable-warnings is set
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `latest` points to `mimic`, we need to force the test to keep the
same ceph release when testing anything else than `mimic`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
it looks "ansible~=2.4" install latest ansible release in 2.5 so we must
specify we want latest release but inferior to 2.5.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since latest points to mimic for the ceph container images, we need to
set `CEPH_DOCKER_IMAGE_TAG` to `latest-luminous` when ceph release is
luminous
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The admin key must be copied on the osd nodes only when we test the
shrink scenario. Shrink relies on ceph-disk commands that require the
admin key on the node where it's being executed.
Now we only copy the key when running on the shrink-osd scenario.
Signed-off-by: Sébastien Han <seb@redhat.com>
In the CI we can see at many times failures like following:
`Failure talking to yum: Cannot find a valid baseurl for repo:
base/7/x86_64`
It seems the fastest mirror detection is sometimes counterproductive and
leads yum to fail.
This fix has been added in the `setup.yml`.
This playbook was used until now only just before playing `testinfra`
and could be used before running ceph-ansible so we can add some
provisionning tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Erwan Velu <evelu@redhat.com>
Currently tag-build-master-luminous-ubuntu-16.04 is not used anymore.
Also now, 'latest' points to CentOS so we need to make that switch here
too.
We know have latest tags for each stable release so let's use them and
point tox at them to deploy the right version.
Signed-off-by: Sébastien Han <seb@redhat.com>
Having callback_plugins, and action plugins in random locations causes
a lot of disparity.
We should centralize this into one place in the plugins directory and
fix up the ansible.cfg to reflect this.
Additionally, since the ansible.cfg already reflects action_plugins, we
don't need a link to action_plugins in the base of the repository.
The jobs launches by the CI are not using 'ansible.cfg'.
There are some parameters that should avoid SSH failure that we are used
to see in the CI so far.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Sébastien Han
Ramana Raja
Andrew Schoen
Andy McCrae