Adds "check_mode: no" to commands which register cluster state in a
variable and don't modify anything. These commands have to run in order
to support running the playbook in check mode.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
Add a tox scenario that adds a new RBD mirror node as a part of already
deployed Ceph cluster and deploys RBD mirror there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
In containerized deployment the default mds cpu quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695850
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In containerized deployment the default osd cpu quota is too low
for production environment using NVMe devices.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695880
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Only rbd-target-api and rbd-target-gw were started/enabled for non
containerized deployment.
The issue doesn't happen with containerized setup.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of creating a dedicated test and using the same testinfra
module we can group them into a single test to avoid multiple ansible
connections and testinfra module execution.
This patch also adds parametrize pytest decorator when possible.
Finally fixing some flake minor issue.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
update scenario is now handled by tox-update.ini file so we shoudn't
have update reference in tox.ini file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b2f2426 didn't use the generate_group_vars_sample.sh script so we
currently have a difference between the content in group_vars and the
ceph-defaults/defaults directories.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently only rbd-target-gw service is restarted during an update.
We also need to restart tcmu-runner and rbd-target-api services
during the ceph iscsi upgrade.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1659611
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Typical error:
```
AttributeError: 'Invalid' object has no attribute 'message'
```
As of python 2.6, `BaseException.message` has been deprecated.
When using python3, it fails because it has been removed.
Let's use `str(error)` instead so we don't hit this error when using
python3.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Until now it was not possible to install a specific container package
because it was somehow hardcoded.
This patch allows to override the container package name (docker.io
vs docker-ce) and refacts the package installation. This could be
achieve via the container_package_name variable.
Instead of using one task per distribution we can set the package and
service name in vars. This allows to have a unified package task.
Also refactorize the debian_prerequisites tasks because the content
was outdated.
https://docs.docker.com/install/linux/docker-ce/debian/https://docs.docker.com/install/linux/docker-ce/ubuntu/Resolves: #3609
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With the stable-4.0 branch nearing release, update
docs/source/index.rst with current information about which Ceph
releases are supported, and which Ansible versions are required, for
each branch.
Signed-off-by: Florian Haas <florian@citynetwork.eu>
this task has nothing to do in stable-4.0 and after.
Let's remove it since stable-4.0 and after aren't intended to deploy
luminous.
Closes: #3873
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
1/ The OSD already supports cpuset to be used for containerized deployments
through the use of the ceph_osd_docker_cpuset_cpus variable. This adds similar
support to the RGW service for containerized deployments by setting a new
variable named ceph_rgw_docker_cpuset_cpus. Like the OSD, there are times where
using distinct cores has advantages over using the CFS in kernel scheduler.
ceph_rgw_docker_cpuset_cpus accepts a comma delimited set of CPU ids
2/ Add support for specifying --cpuset-mem variable to restrict the cgroup's memory
allocations to a particular numa node, which should typically correspond with
the cpu ids of that numa node that were provided with --cpuset-cpus. To ensure
the correct cpu ids are used one can run `numactl --hardware` to list the nodes
and which cpu ids correspond to each.
Signed-off-by: Kyle Bader <kbader@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Since Nautilus there's mgr extra modules not present in ceph-mgr
package but in dedicated packages.
Resolves: #3860
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
These tasks must be run from a monitor which is upgraded otherwise it
might fail.
See: https://tracker.ceph.com/issues/39355
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
these commands could return something else than 0.
Let's ensure all retries have been done before actually failing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This test deploys a luminous cluster with ceph-disk created osds
and then upgrades to nautilus and migrates those osds to ceph-volume.
The nodes are then rebooted and cluster state verified.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When upgrading to nautlius run ``ceph-volume simple scan`` and
``ceph-volume simple activate --all`` to migrate any running
ceph-disk osds to ceph-volume.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1656460
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The library directory that contain the custom ceph modules in present
in the ceph-ansible root directory.
All igw_* mocules are already present there so we don't need the one
present in roles/ceph-iscsi-gw/library.
Also remove the associated spec file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since there's only only scenario available we don't need lvm_scenario
and no_lvm_scenario.
Also add missing assert for ceph-volume tests.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the CI jobs we can change the mount options of the main partition
to avoid extra operations on disk.
Adding jmespath to tests/requirements.txt due to the json_query
filter usage.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since nautilus and msgr2 the monitors also bind on port 3300 in
addition of 6789.
This patch updates test_mons to reflect that change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a playbook that deploys a new monitor on a new node, adds that node
to the Ceph cluster and the monitor to the quorum and updates the ceph
configuration file on OSD nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
When adding a new monitor, we must reuse the existing initial monitor
keyring. Otherwise, the new monitor will issue its 'mkfs' with a new
monitor keyring and it will result with a mismatch between them. The
new monitor will be unable to join the quorum in the end.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
When using purge-cluster playbook with nautilus, there's still the
python-ceph-argparse package installed on the host preventing to
reinstall a ceph cluster with a different version (like luminous or
mimic)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
[rgw] isn't a valide section.
[client.rgw.{instance_name] should be used instead.
Resolves: #3841
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
e6bfb84 introduced a regression in the switch from non containerized
to container deployment.
We need to stop all previous OSDs services. We just don't need the
ceph-disk pattern in the regex.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
as of stable-4.0, ceph-disk is no longer supported.
Let's remove this legacy version of the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we must pass the value of osd_scenario from the stable-3.2 branch which
is used for the initial deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
letterwuyu
Gaudenz Steinlin
Rishabh Dave
Dimitri Savineau
Jugwan Eom
Guillaume Abrioux
Radu Toader
Florian Haas
Kyle Bader
Andrew Schoen