when `ceph-rbd-mirror.target` is not enabled, the service won't start
after a reboot because there is a dependency between these two units.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If ceph-ansible deploys a Ceph cluster with "openstack_config: true"
and sets the openstack_keys map to have certain ACLs or permissions,
the requested ACLs or permissions are only set on one of the monitor
nodes [2] when they should be set on all of them.
This patch solves [3] the above issue by having the chmod and setfacl
tasks iterate the list of mon nodes (including the mon node that the
task was delegated to) to apply the chmod of setfacl to the keys in
openstack_keys.
[1]
```
openstack_keys:
- { name: client.openstack, key: "$(ceph-authtool --gen-print-key)", mon_cap: "allow r", osd_cap: "allow class-read object_prefix rbd_children, allow rwx pool=images, allow rwx pool=vms, allow rwx pool=volumes, allow rwx pool=backups", mode: "0600", acls: ["u:nova:r--", "u:cinder:r--", "u:glance:r--", "u:gnocchi:r--"] }
```
[2]
```
$ ansible mons -m shell -b -a "ls -l /etc/ceph/ceph.client.openstack.keyring ; getfacl /etc/ceph/ceph.client.openstack.keyring"
192.168.1.26 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.29 | SUCCESS | rc=0 >>
-rw-r--r--. 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
group::r--
other::r--getfacl: Removing leading '/' from absolute path names
192.168.1.23 | SUCCESS | rc=0 >>
-rw-r--r--. 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
group::r--
other::r--getfacl: Removing leading '/' from absolute path names
$
```
[3]
```
(undercloud) [stack@hci-director ceph-ansible]$ ansible mons -m shell -b -a "ls -l /etc/ceph/ceph.client.openstack.keyring ; getfacl /etc/ceph/ceph.client.openstack.keyring"
192.168.1.25 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.29 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.27 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
(undercloud) [stack@hci-director ceph-ansible]$
```
Add support for the openSUSE distributions. The required packages
are available either in the distribution repositories or in the
OBS one.
Signed-off-by: Markos Chandras <mchandras@suse.de>
When we consume the distribution packages, we don't have the choise on
which version to install, so we shouldn't require that variable to be
set. Distributions normally provide only one version of Ceph in the
official repositories so we get whatever they provide.
Signed-off-by: Markos Chandras <mchandras@suse.de>
openSUSE Leap 42.3 provides support for Ceph Luminous in both the
distribution package and the latest available version in the OBS
repository so add these as the only available installation methods for
openSUSE.
Signed-off-by: Markos Chandras <mchandras@suse.de>
Like 80d32dec, the path to the fact is not correct.
In any case, we will retrieve the IP address in hostvars, the variable
is the way we get the interface name according where it has been set
(eg.: inventory host file vs. group_vars/)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is no need to have a condition on this task, this test should be
always run since the result will be interpreted later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will prevent ceph-ansible from using a loop device while it
shouldn't in auto_discovery mode.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The path to the fact is not correct.
In any case, we will retrieve the IP address in hostvars, the variable
is the way we get the interface name according where it has been set
(eg.: inventory host file vs. group_vars/)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use `devices` variable instead of `ansible_devices`, otherwise it means
we are not using the devices which have been 'auto discovered'
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current code will also return lvm devices such as /dev/dm-2, this
kind of device type is not supported by ceph-disk at the moment. Now we
just ignore them.
Signed-off-by: Sébastien Han <seb@redhat.com>
- One can not run scripts directly in place, that mounted with `noexec`
option. But one can run scripts as arguments for `bash/sh`.
Signed-off-by: Arano-kai <captcha.is.evil@gmail.com>
During the initial implementation of this 'old' thing we were falling
into this issue without noticing
https://github.com/moby/moby/issues/30341 and where blindly using --rm,
now this is fixed the prepare container disappears and thus activation
fail.
I'm fixing this for old jewel images.
Also this fixes the machine reboot case where the docker logs are
purgend. In the old scenario, we now store the log locally in the same
directory as the ceph-osd-run.sh script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Setting monitor_interface in group_vars/all.yml makes the
hostvars[host]['monitor_interface'] non-existing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1507922
Signed-off-by: Sébastien Han <seb@redhat.com>
Only chmod or setfacl the requested keyring(s) in the
opentack_keys data structure when the mode or acls keys
of that data structure exist.
User may specify four permission combinations for the
keyring file(s): 1. only set ACL, 2. only set mode,
3. set neither mode nor ACL, 4. set mode and then ACL.
Fixes: #2092
Use "ceph_tcmalloc_max_total_thread_cache" to set the
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES value inside /etc/default/ceph for
Debian installs, or /etc/sysconfig/ceph for Red Hat/CentOS installs.
By default this is set to 0, so the default package value will be used,
if specified this value will be changed to match the variable, and ceph
osd services will be restarted.
There was a huge resync from luminous to jewel in ceph-docker:
https://github.com/ceph/ceph-docker/pull/797
This change brought a new handy function to discover partitions tight to
an OSD. This function doesn't exist in the old image so the
ceph-osd-run.sh script breaks when trying to deploy Jewel OSD with that
old Jewel image version.
Signed-off-by: Sébastien Han <seb@redhat.com>
stable-3.0 brought numerous changes in ceph-ansible variables, this PR
aims to maintain backward compatibility for someone running stable-2.2
upgrading to stable-3.0 but keeps its groups_vars untouched.
We will then determine the right options to make sure the upgrade works
but we are expecting that new variables should be used.
We will drop this in a near future, maybe 3.1 or 3.2.
Signed-off-by: Sébastien Han <seb@redhat.com>
This feature isn't available before luminous, therefore, we need to play
them only on luminous and after otherwise the playbook will fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3f3d4b9c727d06154c422d445fc2a245aceaed89)
3a58757 introduced an issue for Jewel deployments, since this role is
skipped, `enabled_ceph_mgr_modules.stdout` doesn't exist, therefore, it
ends up with an attribute error.
Uses `.get()` to retrieve `stdout` with a default value so it won't fail
if this attribute doesn't exist (jewel).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In Jewel, we don't use bootstrap-rbd keyring for rbd-mirror nodes, it
results with a socket path/name different according to which ceph
release you are deploying.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit add new osd scenarios, it aims to simplify the CI setup and
brings a better coverage on the OSD scenarios.
We decided to differentiate between filestore and bluestore, thinking
ahead when filestore won't be supported anymore.
So we now have two classes of tests:
* Filestore
* Bluestore
In each of those classes we have container and non-container.
Then for each we test the following:
* collocated
* collocated dmcrypt
* non-collocated
* non-collocated dmcrypt
* auto discovery collocated
* auto discovery collocated dmcrypt
This gives us a nice coverage and also reduces the footprint on the CI.
We are now up to 4 scenarios, each containing 6 OSD VMs.
Signed-off-by: Sébastien Han <seb@redhat.com>
When doing collocation the condition "inventory_hostname in play_hosts"
is breaking the restart workflow.
Signed-off-by: Sébastien Han <seb@redhat.com>
- Add upgrade support for rbd mirror and nfs daemons.
- Only works with systemd (remove sysvinit and upstart occurence)
- A bit of cleanup
Signed-off-by: Sébastien Han <seb@redhat.com>
This will solve the following issue when starting docker containers on ubuntu:
invalid argument "1\u00a0" for --cpus=1 : failed to parse 1 as a rational number
Closes-bug: #2056
1. add the variables to docker_collocation
2. trigger the check when a MDS is part of the inventory file, not when
we run on an MDS...
Signed-off-by: Sébastien Han <seb@redhat.com>
The container deployment is serialized, adding this task as a best
effort. If docker is already present we pull the image otherwise we wait
for the role to play.
Signed-off-by: Sébastien Han <seb@redhat.com>
on jewel `ceph-rbd-mirror.target` isn't enabled, therefore, if the node
is rebooted, the service doesn't get started.
from ceph-rbd-mirror unit file:
```
[Install]
WantedBy=ceph-rbd-mirror.target
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This patch simplifies the checks and installation tasks for NTP.
Debian and Red Hat had a check for NTP's presence but would then
install NTP right afterwards anyways. In addition, there were
tasks for atomic that weren't used anywhere else in the role.
This patch also uses a dynamic include to reduce delays from
skipped tasks.
This patch changes the `when:` keys so that they have no jinja2
delimiters. This avoids Ansible warnings which could turn into
errors in a future Ansible release.
We now have a variable called ceph_pools that is mandatory when
deploying a MDS.
It's a dictionnary that contains a pool name and a PG count. PG count is
mandatory and must be set, the playbook will fail otherwise.
Closes: https://github.com/ceph/ceph-ansible/issues/2017
Signed-off-by: Sébastien Han <seb@redhat.com>
Ansible throws warnings when using yum/dnf/rpm with the command
module:
[WARNING]: Consider using yum module rather than running yum
This patch adds the `warn: no` argument to suppress the warnings
in the Ansible output.
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
Modern versions of Ansible can handle a list of packages passed
directly to the package modules. This patch optimizes the package
install process by passing the list of packages directly to the
module.
This is causing unknown issues when trying to start a dmcrypt container.
Basically the container is stuck at mount opening the LUKS device. This
is still unknown why this is causing trouble but we need to move
forward. Also, this doesn't seem to help in any ways to fix the race
condition we've seen.
Here is the log for dmcrypt:
cryptsetup 1.7.4 processing "cryptsetup --debug --verbose --key-file
key luksClose fbf8887d-8694-46ca-b9ff-be79a668e2a9"
Running command close.
Locking memory.
Installing SIGINT/SIGTERM handler.
Unblocking interruption on signal.
Allocating crypt device context by device
fbf8887d-8694-46ca-b9ff-be79a668e2a9.
Initialising device-mapper backend library.
dm version [ opencount flush ] [16384] (*1)
dm versions [ opencount flush ] [16384] (*1)
Detected dm-crypt version 1.14.1, dm-ioctl version 4.35.0.
Device-mapper backend running with UDEV support enabled.
dm status fbf8887d-8694-46ca-b9ff-be79a668e2a9 [ opencount flush ]
[16384] (*1)
Releasing device-mapper backend.
Trying to open and read device /dev/sdc1 with direct-io.
Allocating crypt device /dev/sdc1 context.
Trying to open and read device /dev/sdc1 with direct-io.
Initialising device-mapper backend library.
dm table fbf8887d-8694-46ca-b9ff-be79a668e2a9 [ opencount flush
securedata ] [16384] (*1)
Trying to open and read device /dev/sdc1 with direct-io.
Crypto backend (gcrypt 1.5.3) initialized in cryptsetup library
version 1.7.4.
Detected kernel Linux 3.10.0-693.el7.x86_64 x86_64.
Reading LUKS header of size 1024 from device /dev/sdc1
Key length 32, device size 1943016847 sectors, header size 2050
sectors.
Deactivating volume fbf8887d-8694-46ca-b9ff-be79a668e2a9.
dm status fbf8887d-8694-46ca-b9ff-be79a668e2a9 [ opencount flush ]
[16384] (*1)
Udev cookie 0xd4d14e4 (semid 32769) created
Udev cookie 0xd4d14e4 (semid 32769) incremented to 1
Udev cookie 0xd4d14e4 (semid 32769) incremented to 2
Udev cookie 0xd4d14e4 (semid 32769) assigned to REMOVE task(2) with
flags (0x0)
dm remove fbf8887d-8694-46ca-b9ff-be79a668e2a9 [ opencount flush
retryremove ] [16384] (*1)
fbf8887d-8694-46ca-b9ff-be79a668e2a9: Stacking NODE_DEL [verify_udev]
Udev cookie 0xd4d14e4 (semid 32769) decremented to 1
Udev cookie 0xd4d14e4 (semid 32769) waiting for zero
Signed-off-by: Sébastien Han <seb@redhat.com>
in addition to c4dcdaa20 this commit adds the missing condition on
install tasks for debian_rhcs deployment. Without them, these tasks are
played on any kind of deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* DBus on host should include ganesha service file
* to allow ganesha container to respond on DBus it needs to run
in --privileged mode (ganesha folks contacted to look at this)
* ceph_nfs_include_exports_dir variable replaced with more general
ceph_nfs_dynamic_exports
This is something that has nothing to do in `ceph-common`, this
is too specific to `ceph-iscsi-gw` role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is something that has nothing to do in `ceph-common`, this
is too specific to `ceph-nfs` role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make role `ceph-mgr` handling itself the installation of `ceph-mgr`
package because it's complicated to manage it regarding we are going to
install `jewel vs. luminous`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the initial play, the docker command doesn't not exist and then
there is no stdout_lines to the command. So get allows us to fix this by
declaring an array if the command fails.
Signed-off-by: Sébastien Han <seb@redhat.com>
Use an intermediate variable to build the final `dedicated_devices` list
to avoid duplicate entry in that array. (We need a 1:1 relation between
`dedicated_devices` and `devices` since we are using a `with_together`
later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With jewel, `bootstrap_rbd_keyring` is not set because of this condition:
```
when:
- ceph_release_num.{{ ceph_release }} >= ceph_release_num.luminous
```
Therefore, the task `try to fetch ceph config and keys` will fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* Change version from 2 to 3.
* use ceph_rhcs_cdn_debian_repo_version to use other repositories along
* with ceph_rhcs_cdn_debian_repo
Signed-off-by: Sébastien Han <seb@redhat.com>
`ceph_release` isn't available at this step of the playbook because it
is set later based on the installed binaries.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1486062
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The value of doing this is fairly low compare to the added value.
So we remove these tasks, if rbd pool on Jewel doesn't have the right PG
value you can always increase it.
Signed-off-by: Sébastien Han <seb@redhat.com>
All keyring are getting copied to all nodes.
This commit fixes a leftover from a previous code refactor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498583
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
iscsi-gw needs a 'rbd' pool to configure iscsi target.
Note: I could have used the facts already set in `ceph-mon` but I voluntarily
didn't do it to not create a dependancy between these two roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the code regarding all `set_osd_pool_default_*`
related tasks by avoiding usage of useless `set_fact` to determine
whether a key is present in `ceph_conf_overrides`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The rbd pool is the default pool that gets created during ceph cluster
initializaiton. If we act on the rbd related operations too early, the
rbd pool does not exist yet. Move the call to perform rbd operations
to a later stage after other pools have been created.
The rbd_pool.yml playbook has all the operations related to the rbd pool.
Replace the always_run (deprecated) directive with check_mode.
Most of the ceph related tasks only need to run once. The run_once directive
executes the task on the first host.
The ceph sub-command to delete a pool is delete (not rm).
The changes submitted here were tested with this ceph version.
ceph version 0.94.9-9.el7cp (b83334e01379f267fb2f9ce729d74a0a8fa1e92c)
This upload includes these changes:
- Use the fail module (instead of assert).
- From luminous release, the rbd pool is no longer created by default.
Delete the code to create the rbd pool for luminous release
- Conform the .yml files to use the suggested syntax.
The commands are executed on the mcp nodes and I think shell ansible module
is the right one to use. The command module is used to execute commands on
remote nodes. I can make the change to use command module if that is
prefrerred.
This is to ensure `docker_exec_cmd` fact is set with the correct value
in case of daemons collocation
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Also we now play ceph-config to have everything being generated for new
daemons bootstrap during upgrade.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1497959
Signed-off-by: Sébastien Han <seb@redhat.com>
generate_crt|bool|default(false) won't apply the default value, this
generate_crt|default(false)|bool will
Signed-off-by: Sébastien Han <seb@redhat.com>
The task which sets `ceph_current_fsid` in `facts.yml` in case of containerized
deployment, will definitely fail because `docker_exec_cmd` is not set
yet.
This commits simply makes `facts.yml` played after `check_socket.yml` so
`docker_exec_cmd` is set properly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits refacts the role ceph-mds
The goal here is to create cephfs in `ceph-mon` for both containerized
and non-containerized cases so we don't need the admin keyring on mds
nodes anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1488999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Using systemd module allows us to do in one task what we did in three
tasks:
- enable unit file,
- issue a `daemon-reload`,
- start the service
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Running the socket check on all the hosts will override the default
value of docker_exec_cmd, leaving it with the last value (currently
rbd-mirror), as a result the subsequent docker_exec_cmd usage for the
:x
Signed-off-by: Sébastien Han <seb@redhat.com>
There is a bug in the rbd mirror unit file, the upstream fix is here:
https://github.com/ceph/ceph/pull/17969.
This should be reverted once the patch is merged and backport is done.
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes the error :
```
The conditional check 'sestatus.stdout != 'Disabled'' failed.
```
that occurs when running on non rhel based system since the
`sestatus` fact is registered only on rhel based distribution.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Specify the timeout flag to ceph-create-keys, which causes it to time out
if a monitor quorum isn't achieved. This overrides the default timeout
of 10 minutes, causing ceph-ansible to fail faster in the event of cluster
network issues.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
We have seen issues with leftover socker. So now, if a socket is found
we also check if it's accessed by a process. If so, we can run the
handler, if not we remove it and continue the playbook.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
It's sad but we can not rely on the prepare container anymore since the
log are flushed after reboot. So inpecting the container does not return
anything.
Now, instead we use a ephemeral container to look up for the
journal/block.db/block.wal (depending if filestore or bluestore) and
build the activate command accordingly.
Signed-off-by: Sébastien Han <seb@redhat.com>
need to use `hostvars[host]['XXX']` to retrieve the monitor
interface and/or radosgw interface.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1493920
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- move the file fetch/push to the existing task
- rename the include
- generate the ganesha template from ansible
- re-arrange role structure
- re-use tasks for non-container and container
- configure keys for non-container and container
- fix rgw container key collection;
Signed-off-by: Sébastien Han <seb@redhat.com>
the rbd key was not pushed on rbd nodes because its keyring path was not
added in `ceph_config_keys`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Yixing Yan
Andrew Schoen
John Fulton
Markos Chandras
Sébastien Han
yaoning
Arano-kai
Jan Provaznik
Alfredo Deza
Joe Talerico
Major Hayden
Andy McCrae
Christian Berendt
Fabien Brachere
Ali Maredia
Michel Rode
Al Lau
Douglas Fuller
Zack Cerza