Instead of using ceph auth get-or-create command via the ansible command
module then we can use the ceph_key module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This file is currently deployed with '0644' ownership making this file
readable by any user on the system.
Since it contains sensitive information it should be readable by the
owner only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890119
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Correctly set `osd_ids_non_container.stdout_lines` to an empty list if it's
undefined (i.e. in check mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The current task installs the ceph-crash key to "most" hosts via
"delegate_to". This key is only used by the ceph-crash daemon and should
just be installed on all hosts targeted by this role. There is no need
for using a delegated task.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
The service should be started after the ceph-osd systemd overrides has
been added, otherwise, the latter isn't considered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860739
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The container_binding_name package was only mandatory when we were
using the docker modules (docker_image and docker_container) but since
we manage both docker and podman containers without using the dedicated
module then we can remove it.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Using the + operation on two lists doesn't filter out the duplicate
keys.
Currently each OSDs is started (via systemd) twice.
Instead we could use the union filter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
This adds radosgw_zone ansible module for replacing the command module
usage with the radosgw-admin zone command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_zonegroup ansible module for replacing the command
module usage with the radosgw-admin zonegroup command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_realm ansible module for replacing the command module
usage with the radosgw-admin realm command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_user ansible module for replacing the command module
usage with the radosgw-admin user command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds the ceph_fs ansible module for replacing the command module
usage with the ceph fs command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It's time to remove this backward compatibility. Users had enough time
to convert their openstack_keys and key values.
We now fail in ceph-validate if the caps key isn't set.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit drops nested jinja construction in this set_fact task.
It also rename it to `container_exec_start_osd`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit changes defaults value in default pool definitions.
there's no need to define `pg_num`, `pgp_num`, `size` and `min_size`,
`ceph_pool` module will use the current default if needed.
This also drops the 3 following `set_fact` in `ceph-facts`:
- osd_pool_default_pg_num,
- osd_pool_default_pgp_num,
- osd_pool_default_size_num
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In case of deploying new monitor node to an existing cluster,
osd_pool_default_crush_rule should be taken from running monitor because
ceph-osd role won't be run and the new monitor will have different
osd_pool_default_crush_role from other monitors.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
This change default value of grafana-server group name.
Adding some tasks in ceph-defaults in order to keep backward
compatibility.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds connection checks before realm pulls
Curls are performed on the endpoint being pulled from
the mons and the rgws
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1731158
Signed-off-by: Ali Maredia <amaredia@redhat.com>
The `enable extras on centos` task just doesn't work when using the
variable ceph_docker_enable_centos_extra_repo to true.
fatal: [xxx]; FAILED! => {"changed": false, "msg": "Parameter
'baseurl', 'metalink' or 'mirrorlist' is required."}
The CentOS extras repository is enabled by default so it's pretty
safe to remove this task and the associated variable.
This also removes the ceph_docker_on_openstack variable as it's a
leftover and it is unused.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
af9f6684 introduced a regression on the ceph iscsi pool creation
because it was delegated to the first monitor node before that change.
This patch restores the initial worflow.
When the iscsi node doesn't have the admin keyring then the pool
creation fails.
This commit also ensures that the pool creation is only executed once
when having multiple iscsi nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since af9f6684 the cephfs pool(s) creation don't use the fs_pools_created
variable anymore because the ceph_pool module is idempotent.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Just likve `devices`, this commit adds the support for linux device aliases for
`dedicated_devices` and `bluestore_wal_devices`.
Signed-off-by: Tyler Bishop <tbishop@liquidweb.com>
In Pacific we're are sure that users already achieved the msgr2 because
that was introduced in Nautilus.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
libjemalloc1 package is not required neither for ganesha dependency nor
for the package build process. So this task can be simply dropped.
Signed-off-by: Dmitriy Rabotyagov <noonedeadpunk@ya.ru>
When using a quote in the registry password then we have the following
error:
The error was: ValueError: No closing quotation
To fix this we need to use the quote filter.
Close: https://bugzilla.redhat.com/show_bug.cgi?id=1880252
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the current condition doesn't work, as soon as the first iteration is
done the condition makes next iterations skip since `rgw_instances` got
set with the first iteration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859872
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since [1] The bytes_used pool counter in prometheus has been renamed
to stored.
Closes: #5781
[1] https://github.com/ceph/ceph/commit/71fe9149
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using a http(s) proxy with either docker or podman we can rely on
the HTTP_PROXY, HTTPS_PROXY and NO_PROXY environment variables.
But with ansible, even if those variables are defined in a source file
then they aren't loaded during the container pull/login tasks.
This implements the http(s) proxy support with docker/podman.
Both implementations are different:
1/ docker doesn't rely en the environment variables with the CLI.
Thos are needed by the docker daemon via systemd.
2/ podman uses the environment variables so we need to add them to
the login/pull tasks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1876692
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using run_once: true on each tasks in a block section, we
can use the run_once statement at the block level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to install node-exporter on client node because there's
no ceph services running on them.
This also makes sure we use the group name variables in the prometheus
service template instead of hardcoding the values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds the ceph_dashboard_user ansible module for replacing the
command module usage with the ceph dashboard ac-user-xxx command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Before [1] we were using default value for
- size
- min_size
- rule_name
when the key wasn't present in the pool dict.
The commit [1] changed this by defaulting to omit.
This patch restores the original workflow by using facts:
- osd_pool_default_size
- osd_pool_default_min_size
- ceph_osd_pool_default_crush_rule_name
[1] af9f6684f2
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running the rolling_update playbook with an inventory without
monitor nodes defined (like external scenario) then we can't retrieve
the cluster fsid from the running monitor.
In this scenario we have to pass this information manually (group_vars
or host_vars).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1877426
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we can use the ceph_pool module instead of using the command
module combined with ceph osd pool commands.
[1] bddcb439ce
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add the `check` option to server definitions to enable basic HAProxy health
checks for Ceph RADOS gateway backends.
Currently traffic will be forwarded to unhealthly `radosgw.service` servers.
These changes resolve the issue.
Signed-off-by: Niko Smeds nikosmeds@gmail.com
Since there is a check if ceph_custom_key is defined, there is no reason
to define it by default.
Signed-off-by: Rafał Wądołowski <rwadolowski@cloudferro.com>
Regardless of the outcome of Ansible 2.9.12 issue 71200
we can set a default permission for these files.
Closes: https://github.com/ceph/ceph-ansible/issues/5677
Signed-off-by: John Fulton <fulton@redhat.com>
For intsance, there is no need to install logrotate on clients nodes.
This also ensure logrotate is installed only for containerized
deployments since the packaging has an explicit dependency to logrotate
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We already support specifiying a custom crush rule during pool creation
in ceph-osd role but not in ceph-rgw role.
This patch adds the missing code to implement this feature.
Note this is only available for replicated pool not erasure. The rule
must also exist prior the pool creation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1855439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Change the radosgw_frontend_port to take in account more than 1 RGW instance,
in it's original form `radosgw_frontend_port: radosgw_frontend_port | int`,
it configured the 8080 port to all instances, with the following modification
`radosgw_frontend_port: radosgw_frontend_port | int + item|int` we increase in
1 the port count.
Co-authored-by: Daniel Parkes <dparkes@redhat.com>
Signed-off-by: raul <rmahique@redhat.com>
This keyring shouldn't be copied when `nfs_obj_gw` is `True` if the
cluster doesn't contain a rgw node, which can be the case given we are
using `nfs_obj_gw` instead of `nfs_file_gw` (cephfs vs. object), the
deployment will fail trying to copy a key that doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there's no need to add each rgw section on all rgw nodes.
With this commit, only related rgw section are rendered.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using TLS on the ceph dashboard or grafana services, we can provide
the TLS certificate and key.
Those files should be present on the ansible controller and they will be
copyied to the right node(s).
In some situation, the TLS certificate and key could be already present
on the target node and not on the ansible controller.
For this scenario, we just need to copy the files locally (on each remote
host).
This patch adds the dashboard_tls_external variable (with default to
false) to allow users to achieve this scenario when configuring this
variable to true.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860815
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The mds_name fact always gets the ansible_hostname value so we don't
need to have a dedicated fact for this and use the ansible_hostname fact
instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The iscsigws restart scripts for tcmu-runner and rbd-target-{api,gw}
services only call the systemctl restart command.
We don't really need to copy a shell script to do it when we can use
the ansible service module instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We should ensure the container is removed in `ExecPreStart` even when
`{{ container_binary }}` is docker.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These variables aren't consummed anywhere else than in ceph-nfs role so
there is no need to have them in `ceph-defaults`'s defaults
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit fixes these tasks when --limit is used.
It makes sure the fact is set on right nodes even when the playbook is
run with `--limit`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph-dashboard role is executed on the mgr nodes so the TLS cert/key
files are copied to those nodes.
But we are running importing the cert/key files into the ceph
configuration on the monitor.
Closes: #5557
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The download.nfs-ganesha.org source for nfs-ganesha on CentOS isn't
available anymore.
Let's switch back to shaman since we have builds available now.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
nfs-ganesha 3.3 is the latest 3.x release available for octopus so we
should update to this version.
https://download.ceph.com/nfs-ganesha/rpm-V3.3-stable/octopus
This will also match the version used in RHCS 5.
Ceph container already uses that version too.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
All EL8 dependencies are now present on EPEL 8 so we don't need the
additional repositories that were only a temporary solution.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We need to set the mgr dashboard server ip address before restarting the
dashboard module otherwise we can try to bind the dashboard module on an
already used address.
We already do this configuration for the dashboard port value and ssl
setup so we should do the same for server address too.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851455
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is now a dependancy of ceph-mgr so will be installed automatically
and does not need a specific task.
This change means that ceph-mgr installs correctly on Ubuntu Focal where
the python3-routes package is necessary.
Signed-off-by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
This commit makes the playbook copying self-signed generated certificate
to monitors.
When mons and mgrs are deployed on dedicated nodes the playbook will
fail when trying to import certificate and key files since they are
generated on mgrs whereas we try to import them from a monitor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Dimitri Savineau
Gaudenz Steinlin
Guillaume Abrioux
Benoît Knecht
Seena Fallah
Ali Maredia
Tyler Bishop
Dmitriy Rabotyagov
Niko Smeds
George Shuklin
Rafał Wądołowski
John Fulton
raul
Jonathan Rosser