When using a module there is no need to apply this Ansible option. The
module will handle the idempotency on its own. So the module decides
wether or not the task has changed during the execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need to stat for created mgr keyrings since they are created
anyway when deploying a ceph cluster > jewel. In case of a jewel
deployment we won't enter that block.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Until all the mons haven't been updated to Luminous, there is no way to
create a key. So we should do the key creation in the mon role only if
we are not part of an update.
If we are then the key creation is done after the mons upgrade to
Luminous.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Sébastien Han <seb@redhat.com>
On containerized deployment,
when upgrading from jewel to luminous, mgr keyring creation fails because the
command to create mgr keyring is executed on a container that is still
running jewel since the container is restarted later to run the new
image, therefore, it fails with bad entity error.
To get around this situation, we can delegate the command to create
these keyrings on the first monitor when we are running the playbook on the last monitor.
That way we ensure we will issue the command on a container that has
been well restarted with the new image.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This key is created after the last mon is up so there is no need to try
to push it from the first mon. The initia mon container is not creating
the mgr key, ansible does. So this key will never exist.
The key will go into the fetch dir once the last mon is up, then when
the ceph-mgr plays it will try to get it from the fetch directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the initial bootstrap of the first mon, the monmap file is
destroyed so it's not available and ansible will never find it.
Signed-off-by: Sébastien Han <seb@redhat.com>
Useful for softwares that do data collection/monitoring like collectd.
They can connect to the socket and then retrieve information.
Even though the sockets are exposed now, I'm keeping the docker exec to
check the socket, this will allow newer version of ceph-ansible to work
with older versions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1563280
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
While hostname -f will always return an hostname including its
domain part and -s without the domain part, the behavior when
no arguments are given can include or not include the domain part
depending on how the system is configured; the socket name might
not match the instance name then.
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
stable-3.0 brought numerous changes in ceph-ansible variables, this PR
aims to maintain backward compatibility for someone running stable-2.2
upgrading to stable-3.0 but keeps its groups_vars untouched.
We will then determine the right options to make sure the upgrade works
but we are expecting that new variables should be used.
We will drop this in a near future, maybe 3.1 or 3.2.
Signed-off-by: Sébastien Han <seb@redhat.com>
This patch changes the `when:` keys so that they have no jinja2
delimiters. This avoids Ansible warnings which could turn into
errors in a future Ansible release.
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
All keyring are getting copied to all nodes.
This commit fixes a leftover from a previous code refactor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498583
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the code regarding all `set_osd_pool_default_*`
related tasks by avoiding usage of useless `set_fact` to determine
whether a key is present in `ceph_conf_overrides`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Using systemd module allows us to do in one task what we did in three
tasks:
- enable unit file,
- issue a `daemon-reload`,
- start the service
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This fixes the error :
```
The conditional check 'sestatus.stdout != 'Disabled'' failed.
```
that occurs when running on non rhel based system since the
`sestatus` fact is registered only on rhel based distribution.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the rbd key was not pushed on rbd nodes because its keyring path was not
added in `ceph_config_keys`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We generate the ceph.conf on all the nodes through the
ceph-docker-common so there is no need to push it to the Ansible file.
Also this is breaking the ceph.conf template generation since we only
generate sections based on the host the ansible task is running on.
For example, what's typically happening, we bootstrap the monitor, we
get a ceph.conf generated for a mon only, we go on an osd, we generate
the ceph.conf with osd section (done by ceph-docker-common) but this
gets overwritten by the copy_config task of the ceph-osd role.
Signed-off-by: Sébastien Han <seb@redhat.com>
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
All keys are copied to all nodes.
This commit split that task in each roles so keys are copied to their
respective nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1488999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must mask the image so we are sure that even if the system reboots
then the OSDs won't start.
Also remove Ceph udev rules if found on the system prior to deploy
containers. If we don't do this we are exposed to conflicts between udev
rules and sytemd unit files.
Also add the CI will now test the migration from a non-containerized cluster to a
containerized cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Some deployments can't copy infrastructure playbooks outside of the
infrastructure-playbooks directory. Thus they use ANSIBLE_ROLES_PATH to
overcome this. However some roles have 'playbook_dir' hardcoded, which
results in wrong path since the execution comes from
infrastructure-playbooks. Basically the role triggered by a playbook
from infrastructure-playbooks believes that the roles are in
infrastructure-playbooks/roles. This commit fixes that.
Signed-off-by: Sébastien Han <seb@redhat.com>
Before this commit we were forcing ipv4 which might not be available.
Now setting ip_version to ipv4 or ipv6 will give you the right support.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1484189
Signed-off-by: Sébastien Han <seb@redhat.com>
Move `fsid`,`monitor_name`,`docker_exec_cmd` and `ceph_release` set_fact
to `ceph-defaults` role.
It will allow to reuse these facts without having to play `ceph-common`
or `ceph-docker-common`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some tasks fetch file to `{{ fetch_directory }}/docker_mon_files` and
then try to copy from `{{ fetch_directory }}/{{ fsid }}`. That causes
the playbook to fail.
Fixes: #1683
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Followup on https://github.com/ceph/ceph-ansible/pull/1469 where we
merged most of the container code from roles/ceph-*/task/docker/*.yml
into roles/ceph-docker-common/tasks/
It seems that we forgot to remove the original files.
Signed-off-by: Sébastien Han <seb@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The CI on Docker is reporting the following error:
STDERR:
Error EINVAL: bad entity name
This is due to the fact that this auth entity name does not exist on
Jewel so we should not create that key when running Jewel containers.
Fixes: https://github.com/ceph/ceph-ansible/issues/1514
Signed-off-by: Sébastien Han <seb@redhat.com>
This is to allow ceph-mgr daemons to remote control
osd and mds daemons with MCommand messages.
Fixes: http://tracker.ceph.com/issues/19713
Signed-off-by: John Spray <john.spray@redhat.com>
Without this, we don't test the mgr role so we need to add it.
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
Ansible evaluates the 'with_items' before the 'when' so if the inventory
does not have the group declared it'll fail. To fix this, we set an
empty array to make the with_items happy and then evaluate with the
'when'.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this change we were deploying a monitor using tis fqdn name but
we were checking its state and performing actions on it using its
shortname.
Signed-off-by: Sébastien Han <seb@redhat.com>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
Sometimes the socket appears during the 5th attempt and sometimes not so
increasing the timeout a little bit.
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Guillaume Abrioux
jtudelag
Giulio Fidente
John Fulton
Major Hayden
John Spray
Konstantin Shalygin