We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since ed36a11 we move the crush rules creation code from the ceph-mon to
the ceph-osd role.
To keep the backward compatibility we kept the possibility to set the
crush variables on the mons side but we didn't move the default values.
As a result, when using crush_rule_config set to true and wanted to use
the default values for crush_rules then the crush rule ansible task
creation will fail.
"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute
'crush_rules'"
This patch move the default crush variables from ceph-mon to ceph-osd
role but also use those default values when nothing is defined on the
mons side.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798864
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We must call `container_exec_cmd` from the right monitor node otherwise
the value of the fact might mistmatch between the delegated node and the
node being played.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794900
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Because we need to manage legacy ceph-disk based OSD with ceph-volume
then we need a way to know the osd_objectstore in the container.
This was done like this previously with ceph-disk so we should also
do it with ceph-volume.
Note that this won't have any impact for ceph-volume lvm based OSD.
Rename docker_env_args fact to container_env_args and move the container
condition on the include_tasks call.
Remove OSD_DMCRYPT env variable from the ceph-osd template because it's
now included in the container_env_args variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792122
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When unsetting the noup flag, we must call container_exec_cmd from the
delegated node (first mon member)
Also, adding a `run_once: true` because this task needs to be run only 1
time.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Before this patch, the lvm2 package installation was done during the
ceph-osd role.
However we were running ceph-volume command in the ceph-config role
before ceph-osd. If lvm2 wasn't installed then the ceph-volume command
fails:
error checking path "/run/lock/lvm": stat /run/lock/lvm: no such file or
directory
This wasn't visible before because lvm2 was automatically installed as
docker dependency but it's not the same for podman on CentOS 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
[303] mktemp used in place of tempfile module
[602] Don't compare to empty string
[701] No 'galaxy_info' found
[702] Use 'galaxy_tags' rather than 'categories'
This patch also changes the ansible log_path value via the
ANSIBLE_LOG_PATH environment variable in the travis configuration to
avoid warnings.
[WARNING]: log file at /home/travis/ansible/ansible.log is not writeable
and we cannot create it, aborting
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
`parted_results` isn't used anymore in the playbook.
By the way, `parted` seems to cause issue because it changes the
ownership on devices:
```
root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:53 /dev/sdc
brw-rw----. 1 ceph ceph 8, 33 Jun 11 08:53 /dev/sdc1
brw-rw----. 1 ceph ceph 8, 34 Jun 11 08:53 /dev/sdc2
[root@osd0 ~]# parted -s /dev/sdc print
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdc: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 1075MB 1074MB ceph block.db
2 1075MB 2149MB 1074MB ceph block.db
[root@osd0 ~]# #We can see ownerships have changed from ceph:ceph to root:disk:
[root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:57 /dev/sdc
brw-rw----. 1 root disk 8, 33 Jun 11 08:57 /dev/sdc1
brw-rw----. 1 root disk 8, 34 Jun 11 08:57 /dev/sdc2
[root@osd0 ~]#
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
When using osd_scenario lvm, we never check if the lvm2 package is
present on the host.
When using containerized deployment and docker on CentOS/RedHat this
package will be automatically installed as a dependency but not for
Ubuntu distribution.
OSD deployed via ceph-volume require the lvmetad.socket to be active
and running.
Resolves: #3728
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
since `ceph-volume` introduction, there is no need to split those tasks.
Let's refact this part of the code so it's clearer.
By the way, this was breaking rolling_update.yml when `openstack_config:
true` playbook because nothing ensured OSDs were started in ceph-osd role (In
`openstack_config.yml` there is a check ensuring all OSD are UP which was
obviously failing) and resulted with OSDs on the last OSD node not started
anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The playbook has various improvements:
* run ceph-validate role before doing anything
* run ceph-fetch-keys only on the first monitor of the inventory list
* set noup flag so PGs get distributed once all the new OSDs have been
added to the cluster and unset it when they are up and running
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962
Signed-off-by: Sébastien Han <seb@redhat.com>
Instead used "import_tasks" and "include_tasks" to tell whether tasks
must be included statically or dynamically.
Fixes: https://github.com/ceph/ceph-ansible/issues/2998
Signed-off-by: Rishabh Dave <ridave@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since the openstack_config.yml has been moved to `ceph-osd` we must move
this `set_fact` in ceph-osd otherwise the tasks in
`openstack_config.yml` using `openstack_keys` will actually use the
defaults value from `ceph-defaults`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1585139
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in `ceph-osd` there is no need to set `docker_exec_cmd` since the only
place where this fact is used is in `openstack_config.yml` which
delegate all docker command to a monitor node. It means we need the
`docker_exec_cmd` fact that has been set referring to `ceph-mon-*`
containers, this fact is already set earlier in `ceph-defaults`.
By the way, when collocating an OSD with a MON it fails because the container
`ceph-osd-{{ ansible_hostname }}` doesn't exist.
Removing this task will allow to collocate an OSD with a MON.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1584179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move cephfs pools creation in `ceph-mds` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The LVM lvcreate fails if the disk already has a GPT header.
We create GPT header regardless of OSD scenario. The fix is to
skip header creation for lvm scenario.
fixes: https://github.com/ceph/ceph-ansible/issues/2592
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
This commit does a couple of things:
* use a common.yml file that contains things that can be played on both
container and non-container
* refactor the ability to copy the admin key to the nodes
Signed-off-by: Sébastien Han <seb@redhat.com>
Regardless if the partition is 'ceph' or something else, we don't want
to be as strick as checking for a particular partition.
If the drive has a partition, we just don't do anything.
This solves the case where the server reboots, disks get a different
/dev/sda (node) allocation. In this case, prior to restarting the server
/dev/sda was an OSD, but now it's /dev/sdb and the other way around.
In such scenario, we will try to prepare the OSD and create a new
partition, so let's not mess around with devices that have partitions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498303
Signed-off-by: Sébastien Han <seb@redhat.com>
This will prevent ceph-ansible from using a loop device while it
shouldn't in auto_discovery mode.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current code will also return lvm devices such as /dev/dm-2, this
kind of device type is not supported by ceph-disk at the moment. Now we
just ignore them.
Signed-off-by: Sébastien Han <seb@redhat.com>
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
This is to ensure `docker_exec_cmd` fact is set with the correct value
in case of daemons collocation
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
L3D
Rishabh Dave
Andrew Schoen
Sébastien Han
Konstantin Shalygin
Vishal Kanaujia
Major Hayden