This is necessary when configuring RGW with SSL because
in addition to passing specific frontend options, civetweb
appends the 's' character to the binding port and beast uses
ssl_endpoint instead of endpoint.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1722071
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, if you set `ms bind ipv6 = True` you must explicitly set
`ms bind ipv4 = False` too, otherwise OSDs will still try to pick up an
IPv4 address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710319
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
`ceph_release` is set in `ceph-container-common` but this role is
played only on first node for clients, this means ceph-config will fail
on all client nodes except the first one.
This commit ensure ceph_release is set for all client nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling msgr2 style declaration for Nautilus and above. Prior releases
will keep the right syntax.
When upgrading from Mimic to Nautilus we must maintain something in the
form of:
mon_host = [v1:127.0.0.1:6789/0,v2:127.0.0.1:3300/0]
Signed-off-by: Sébastien Han <seb@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This part of the code is not needed since ceph-ansible@master is
intended to deploy ceph@master only.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph.conf doesn't accept float value.
Typical error seen:
```
$ sudo ceph daemon osd.2 config get osd_memory_target
Can't get admin socket path: unable to get conf option admin_socket for osd.2:
parse error setting 'osd_memory_target' to '7823740108,8' (strict_si_cast:
unit prefix not recognized)
```
This commit ensures the value inserted in ceph.conf will be an integer.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
using consecutive set_fact in the playbook instead of complex jinja syntax
makes ceph.conf.j2 more readable.
By the way, jinja can be painful to debug at some point.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`monitor_address_block` should be read from hostvars[host] instead of
current node being played.
eg:
Let's assume we have:
```
[mons]
ceph-mon0 monitor_address=192.168.1.10
ceph-mon1 monitor_interface=eth1
ceph-mon2 monitor_address_block=192.168.1.0/24
```
the ceph.conf generation task will end up with:
```
fatal: [ceph-mon0]: FAILED! => {}
MSG:
'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_interface'
```
the reason is that it will assume `monitor_address_block` isn't defined even on
ceph-mon2 because looking for `monitor_address_block` instead of
`hostvars[host]['monitor_address_block']`, therefore it enters in the condition as default value:
```
{%- else -%}
{% set interface = 'ansible_' + (monitor_interface | replace('-', '_')) %}
{% if ip_version == 'ipv4' -%}
{{ hostvars[host][interface][ip_version]['address'] }}
{%- elif ip_version == 'ipv6' -%}
[{{ hostvars[host][interface][ip_version][0]['address'] }}]
{%- endif %}
{%- endif %}
```
`monitor_interface` is set with default value `'interface'` so the `interface`
variable is built with 'ansible_' + 'interface'. It makes ansible throwing a
confusing message about `'ansible_interface'`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1635303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the default value for _rgw_hostname was took from the current node being
played while it should be took from the respective node in the loop.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
let's add ansible_hostname as a default value for rgw_hostname if no
hostname in servicemap matches ansible_fqdn.
Fixes: #3063
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the ceph.conf.j2 always assumes the hostname used to register the
radosgw in the servicemap is equivalent to `{{ ansible_hostname }}`
which returns the shortname form.
We need to detect which form of the hostname was used in case of already
deployed cluster and update the ceph.conf accordingly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1580408
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is no need to have all these conditions.
for instance, assuming `mds_group_name` is set to 'mdss':
- `if groups[mds_group_name] is defined` checks if `'mdss'` is present in `{{ groups }}`
- `if {{ mds_group_name }} in group_names` checks if the current node is part
the group `'mdss'`
- `if inventory_hostname in groups.get(mds_group_name, [])` checks if
the current node is part of the group 'mdss'
The third condition is enough to cover the need of ensuring we are
running on a mds node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
This was introduced by
59ee2e8d3b
and made our socket checks impossible to run. The PID could be found,
but the cctid cannot.
This happens during upgrade to mimic and on cluster running on mimic.
So let's force the admin socket the way it was so we can properly check
for existing instances also the line $cluster-$name.$pid.$cctid.asok
is only needed when running multiple instances of the same daemon,
thing ceph-ansible cannot do at the time of writing
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610220
Signed-off-by: Sébastien Han <seb@redhat.com>
The container image recently merged both cluster and mon log into a
single stream. Following this, we now see this warning coming from the
container image:
2018-06-19 13:44:01.542990 7ff75b024700 1 mon.vm02@1(peon).log
v57928205 unable to write to '/var/log/ceph/ceph.log' for channel
'cluster': (2) No such file or directory
So we now tell the mon to not log cluster log on the filesystem.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591771
Signed-off-by: Sébastien Han <seb@redhat.com>
With two public networks configured - we found that with
"NETWORK_ADDR_1, NETWORK_ADDR_2" install process consistently became
broken, trying to find docker registry on second network, and not
finding mon container.
but without spaces
"NETWORK_ADDR_1,NETWORK_ADDR_2" install succeeds
so, containerized install is more peculiar with formatting of this line
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1534003
Signed-off-by: Sébastien Han <seb@redhat.com>
Previously we were using ceph_conf_overrides however this doesn't play
nice for softwares like TripleO that uses ceph_conf_overrides inside its
own code. For now, and since this is the only occurence of this, we can
ensure no logs through the ceph conf template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1532619
Signed-off-by: Sébastien Han <seb@redhat.com>
If a deployer uses an interface name with a dash/hyphen in it, such
as 'br-storage' for the monitor_interface group_var, the ceph.conf.j2
template fails to find the right facts. It looks for
'ansible_br-storage' but only 'ansible_br_storage' exists.
This patch converts the interface name to underscores when the
template does the fact lookup.
The path to the fact is not correct.
In any case, we will retrieve the IP address in hostvars, the variable
is the way we get the interface name according where it has been set
(eg.: inventory host file vs. group_vars/)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Setting monitor_interface in group_vars/all.yml makes the
hostvars[host]['monitor_interface'] non-existing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1507922
Signed-off-by: Sébastien Han <seb@redhat.com>
stable-3.0 brought numerous changes in ceph-ansible variables, this PR
aims to maintain backward compatibility for someone running stable-2.2
upgrading to stable-3.0 but keeps its groups_vars untouched.
We will then determine the right options to make sure the upgrade works
but we are expecting that new variables should be used.
We will drop this in a near future, maybe 3.1 or 3.2.
Signed-off-by: Sébastien Han <seb@redhat.com>
need to use `hostvars[host]['XXX']` to retrieve the monitor
interface and/or radosgw interface.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1493920
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will give us more flexibility and the possibility to deploy a client node
for an external ceph-cluster.
related BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1469426Fixes: #1670
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Giulio Fidente
Guillaume Abrioux
Dimitri Savineau
Zack Cerza
Sébastien Han
guihecheng
Neha Ojha
Major Hayden
Ali Maredia