This adds ceph-*.target systemd unit files support for containerized
deployments.
This also fixes a regression introduced by PR #6719 (rgw and nfs systemd
units not getting purged)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1962748
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 09ef465f62)
EL7 ships with Jinja2 version 2.7, which is missing the `eq` test.
Work around this by using `match` instead.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
If the `pg_num` value specified in `rgw_create_pools` is different from the
actual value in the cluster, apply it with `ceph osd pool set`.
This corresponds to the behavior of the `ceph_pool` module used in Ceph Ansible
5.0 onward.
Also avoid setting the pool application if it's already done.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
sufficient for the default value (512) of rgw thread pool size.
But if its value is increased near to the pids-limit value,
it does not leave place for the other processes to spawn and run within
the container and the container crashes.
pids-limit set to unlimited regardless of the container engine.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1987041
Signed-off-by: Teoman ONAY <tonay@redhat.com>
(cherry picked from commit 9b5d97adb9)
When the rgw_multisite_proto variable is set to https then we shoudn't use
the IP address in the zone endpoints list but the node FQDN to match the
TLS certificate CN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1965504
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ad05a08160)
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9758e3c513)
This adds a `ExecStartPre=-/usr/bin/mkdir -p /var/log/ceph` in all
systemd service templates for all ceph daemon.
This is specific to RHCS after a Leapp upgrade is done. Indeed, the
`/var/log/ceph` seems to be removed after the upgrade.
In order to work around this issue let's ensure the directory is present
before trying to start the containers with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1949489
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bab403b603)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
if `rgw_zonegroupmaster` is not defined at the rgw instance level in
`rgw_instances` it will fallback to a wrong variable (`rgw_zonemaster`).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925247
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 931b87e830)
typical error:
```
2021-02-01 03:11:09,809 p=93834 u=cephuser n=ansible | TASK [ceph-rgw : check if the realm system user already exists] ***************************************************************************************************************************************************
2021-02-01 03:11:09,809 p=93834 u=cephuser n=ansible | Monday 01 February 2021 03:11:09 -0500 (0:00:00.084) 0:14:38.607 *******
2021-02-01 03:11:09,836 p=93834 u=cephuser n=ansible | fatal: [ceph-kvm-ms2-1611241931591-node7-rgw]: FAILED! =>
msg: |-
The task includes an option with an undefined variable. The error was: 'None' has no attribute 'realm'
```
This task should be skipped when `zone_users` is undefined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1922998
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `ceph-rgw` may be called from `ceph-handler` in some contexts we
should avoid rerunning it unnecessarily.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8617081664)
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3e262e072b)
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 71a5e666e3)
When collocating rgw with either a mon, mgr or osd, switching from
single site to a multisite rgw setup failed because of the handlers
triggered between the ansible play of the collocated daemon and the play
of the rgw. Since the multisite changes are not yet applied the handlers
fail.
The idea here is to ensure we run the multisite configuration from the
ceph-handler role before the restart happens, this way it won't complain
because of non existing multisite configuration.
(Note: this is also valid when simply changing a multisite configuration)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1888630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 513c8cfe55)
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c68b124ba8)
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 483adb5d79)
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5ba7824c55)
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 16cd183b9c)
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 54ba38e35e)
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a802fa2810)
This commit adds connection checks before realm pulls
Curls are performed on the endpoint being pulled from
the mons and the rgws
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1731158
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 902575369c)
We already support specifiying a custom crush rule during pool creation
in ceph-osd role but not in ceph-rgw role.
This patch adds the missing code to implement this feature.
Note this is only available for replicated pool not erasure. The rule
must also exist prior the pool creation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1855439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cb8f0237e1)
In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 47b7c00287)
This variable isn't consumed by the container so we can remove it.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1361e84a4e)
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7dd68b9ac1)
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d43769dc2a)
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd22f1d1ec)
We were only adding the endpoints to the master zone but not to the
zonegroup.
This patch fixes the issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1839228
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 0175c205fa)
It is common to set templated pool names in `rgw_create_pools`, e.g.
```yaml
rgw_create_pools:
"{{ rgw_zone }}.rgw.buckets.index":
pg_num: 16
size: 3
type: replicated
```
This worked fine with Ansible 2.8, but broke in Ansible 2.9 due to a change in
the way `with_dict` works [1].
This commit replaces the use of `with_dict` with
```yaml
loop: "{{ rgw_create_pools | dict2items }}"
```
which works as intended and expands the template in the pool name.
[1]: https://docs.ansible.com/ansible/latest/porting_guides/porting_guide_2.9.html#loopsCloses#5348
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit d2b7670c7d)
The '==' jinja2 operator (or 'equalto') has been introduced in jinja2
2.8.
On EL7, jinja2 version is 2.7 so the operator isn't present creating
templating error like:
The error was: TemplateRuntimeError: no test named '=='
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1747206
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34e6e8e06c)
This was removed in Ansible 2.9.
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|version_compare` use `result is version_compare`. This
feature will be removed in version 2.9. Deprecation warnings can be
disabled by setting deprecation_warnings=False in ansible.cfg.
Rename 'version_compare' to the function 'version'.
version_compose was renamed to version since ansible 2.5
Signed-off-by: abaird-rh <abaird@redhat.com>
(cherry picked from commit eb71244bfd)
Sometimes, these task can timeout for some reason.
Adding these retries can help to avoid unexcepted failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7a8a719e75)
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 71f55bd54d)
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9d3b49293d)
5s as a connection timeout could be low in some setup. Let's increase
it to 10s.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 44e750ee5d)
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5a03e0ee1c)
In 3c31b19ab3, I fixed the `customize pool
size` task by replacing `item.size` with `item.value.size`. However, I
missed the same issue in the `when` condition.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3842aa1a30)
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3c31b19ab3)
There is no need to get n * number of nodes the different keyrings.
Adding a `run_once: true` here avoid running a ceph command too many
times which could be impacting large cluster deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9bad239d77)
This commit moves containerized deployment related files to `./tasks/`
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e08194dd67)
This commit isolates the systemd unit files generation for containers into
separate yml files in order to be able importing each corresponding roles
without playing all tasks.
This is needed so we can run ceph-ansible to render systemd unit files
so they call podman instead of docker.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bd64167469)
[201] Trailing whitespace
[206] Variables should have spaces before and after: {{ var_name }}
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 42082c0a27)
Guillaume Abrioux
Benoît Knecht
Teoman ONAY
Dimitri Savineau
Neelaksh Singh
Alex Schultz
Ali Maredia
abaird-rh