The Vagrant dashboard scenario creates a dedicated grafana node but
was not use in the ansible inventory.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add a new functional test that deploys Ceph cluster with three nodes for
MON, OSD and RBD Mirror and, then, runs shrink-rbdmirror.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MGR and then runs shrink-mgr.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MDS and then runs shrink-mds.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
gateway_ip_list is depreciated and is only used when using the old
ceph-iscsi-config/cli packages that are no longer being developed
(GH repos are archived). Because ceph-iscsi-config/cli is no longer
being worked on, this modifies the tests to stress the ceph-iscsi
based installs.
Signed-off-by: Mike Christie <mchristi@redhat.com>
- clean some leftover.
- move nfs_ganesha_[stable|dev] in group_vars so dev_setup.yml can modify them.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph restapi configuration was only available until Luminous
release so we don't need those leftovers for nautilus+.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
CI is facing issues where docker pull reach the timeout, let's increase
this to avoid CI failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
if we don't assign the rbd application tag on this pool,
the cluster will get `HEALTH_WARN` state like following:
```
HEALTH_WARN application not enabled on 1 pool(s)
POOL_APP_NOT_ENABLED application not enabled on 1 pool(s)
application not enabled on pool 'rbd'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds `pytest-rerunfailures` in requirements.txt so we can
retry failing test in testinfra to avoid false positive. (eg: sometimes it
can happen for some reason a service takes too much time to start)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In order to support ansible 2.8 with testinfra we need to use the
latest release (3.0.x).
Adding ssh-config option to py.test.
Also bumping the pytest and xdist version.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
c907ec41ae introduced a typo.
This commit fixes it.
```
[WARNING]: While constructing a mapping from /home/guits/ceph-ansible/tests/functional/dev_setup.yml, line 21, column 9, found a duplicate dict key (replace).
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current lvm_osds only tests filestore on one OSD node.
We also have bs_lvm_osds to test bluestore and encryption.
Let's use only one scenario to test filestore/bluestore and with or
without dmcrypt on four OSD nodes.
Also use validate_dmcrypt_bool_value instead of types.boolean on
dmcrypt validation via notario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add a playbook that deploys manager on a new node and adds that node to
the already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a tox scenario that adds a new RGW node as a part of already
deployed Ceph cluster and deploys RGW there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a tox scenario that adds a new RBD mirror node as a part of already
deployed Ceph cluster and deploys RBD mirror there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Instead of creating a dedicated test and using the same testinfra
module we can group them into a single test to avoid multiple ansible
connections and testinfra module execution.
This patch also adds parametrize pytest decorator when possible.
Finally fixing some flake minor issue.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This test deploys a luminous cluster with ceph-disk created osds
and then upgrades to nautilus and migrates those osds to ceph-volume.
The nodes are then rebooted and cluster state verified.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since there's only only scenario available we don't need lvm_scenario
and no_lvm_scenario.
Also add missing assert for ceph-volume tests.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the CI jobs we can change the mount options of the main partition
to avoid extra operations on disk.
Adding jmespath to tests/requirements.txt due to the json_query
filter usage.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since nautilus and msgr2 the monitors also bind on port 3300 in
addition of 6789.
This patch updates test_mons to reflect that change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add a playbook that deploys a new monitor on a new node, adds that node
to the Ceph cluster and the monitor to the quorum and updates the ceph
configuration file on OSD nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
It's usefull to have logs in debug mode enabled in order to have
more information for developpers.
Also reindent to json file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to have multiple ceph-override.json copies. We
currently already have symlink to all_daemons/ceph-override.json so
we can do it for all scenarios.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Instead of hardcoding group names, import ceph-defaults earlier. Also,
rectify a minor mistake in vagrant_varaibles.yml for containerized
version of add_osds.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
os.path.join adds the separator (i.e. '/') between the provided path
components only if needed. Providing a single path component doesn't
lead to any checks.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
otherwise a bunch of jobs will fail like following:
```
[WARNING]: Unable to parse /home/jenkins-build/build/workspace/ceph-ansible-nightly-luminous-ubuntu-container-stable-3.2-bluestore_lvm_osds/tests/functional/bs-lvm-osds/container/hosts-ubuntu as an inventory source
[WARNING]: No inventory was parsed, only implicit localhost is available
[WARNING]: provided hosts list is empty, only localhost is available. Note that the implicit localhost does not match 'all'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of testinfra 2.0.0, the binary name is `py.test`.
But let's pin the version to 1.19.0.
Indeed, migrating to 2.0.0 requires our current testing to be reworked a bit.
Since we don't have the bandwidth ATM for this, it's better to simply
keep testing with testinfra 1.19.0.
Note that I've replaced all `testinfra` occurences by `py.test` anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`test_mon_host_line_has_correct_value()` will cover this test in
anycase. It doesn't worth to have a dedicated test for this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
nfs-ganesha v2.5 and 2.6 have hit EOL. Install nfs-ganesha v2.7
stable that is currently being maintained.
Signed-off-by: Ramana Raja <rraja@redhat.com>
using `!` mark in tox.ini doesn't work on comma separated list.
The idea here is to skip all containerized scenario in dev_setup.yml and
use the `!` for the update scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
fix the wrong path used in various rgw testinfra tests.
set `1` as default value for `radosgw_num_instances`: if
`ansible_vars.get(radosgw_num_instances)` returns `None`, we can assume
there's only 1 instance since it's the default value in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since we now set this variable in inventory host, the regexp needs to be
updated, the assignment operator is `=`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit reorganizes the testing directory layout.
The idea is to have more consistency with the names of scenario and
their corresponding path, eg: non-container vs. container: each scenario
has a subdirectory for container deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit refacts the way the environment are named by adding a factor
`{non_container,container}`. This will avoid a lot of duplicate
definition in tox.ini and bring kind of consistency.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
sometimes it can fail because the version of `six` package is prior to
1.10.0.
This commit ensures the version is enforced.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
to avoid duplicating code in `site.yml.sample`, `site-docker.yml.sample`
and `setup.yml`, let's isolate this part of the code and simply include
it each time we need it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since msgr2 changes got merged, the OSDs in master (to be nautilus) will
double the amount of ports they listen to.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Based on https://github.com/ceph/ceph-container/pull/1269 and given
there are no stable packages and reliable repository, we disable nfs
ganesha temporarly.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we now collocated mgrs and mons on the same machine we have to
remove the mgrs section, they are not needed anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will speed up the deployment and also deploy mon and mgr collocated
just as recommended.
This won't prevent you of adding more and dedicaded machines for mgr if
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
bring the recent refact about `osd_pool_default_pg_num` and
`osd_pool_default_size` into podman scenario as well.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we are now testing on docker and podman our functionnal tests must
reflect that. So now, if we detect the podman binary we will use it,
otherwise we default to docker.
Signed-off-by: Sébastien Han <seb@redhat.com>
We run an initial deployment with `osd_pool_default_size: 1` in
`ceph_conf_overrides`.
When re-running the playbook to test idempotency and handlers, we reset
`ceph_conf_overrides`, we must append a new value instead of just
overwritting it, otherwise, this can lead to error in the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
setting this setting to 1 makes the CI covering the related code in the
playbook without breaking the upgrade scenarios.
Those scenarios were broken because there is a check `TASK [waiting for
clean pgs...]` in rolling_update.yml, since the pool size for
`cephfs_metadata` and `cephfs_data` are updated to `2` in
`ceph-override.json` and there is not enough osd to honor this size,
some PGs are degraded and make the mentioned check failing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
** configuration seems to be for filestore:
[ERROR]: [ceph-osd0] Validation failed for variable: lvm_volumes
** Removing `radosgw_interface: eth1` to resolve:
The task includes an option with an undefined variable. The error was:
'ansible.vars.hostvars.HostVarsVars object' has no attribute
u'ansible_eth1'
The error appears to have been in
'/home/nwatkins/src/ceph-ansible/roles/ceph-defaults/tasks/set_radosgw_address.yml':
line 21, column 5, but may be elsewhere in the file depending on the
exact syntax problem.
The offending line appears to be:
- name: set_fact _radosgw_address to radosgw_interface - ipv4
^ here
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Let's test ceph-ansible master against ansible 2.7 to catch early any
potential issue with this ansible version.
Closes: #3148
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding more memory to VMs for rgw_multisite scenarios could avoid this error
I have recently hit in the CI:
(It is worth it to set 1024Mb since there is only 2 nodes in those
scenarios.)
```
fatal: [osd0]: FAILED! => {
"changed": false,
"cmd": [
"docker",
"run",
"--rm",
"--entrypoint",
"/usr/bin/ceph",
"docker.io/ceph/daemon:latest-luminous",
"--version"
],
"delta": "0:00:04.799084",
"end": "2018-10-29 17:10:39.136602",
"rc": 1,
"start": "2018-10-29 17:10:34.337518"
}
STDERR:
Traceback (most recent call last):
File "/usr/bin/ceph", line 125, in <module>
import rados
ImportError: libceph-common.so.0: cannot map zero-fill pages: Cannot allocate memory
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a playbook that will upload a file on the master then try to get
info from the secondary node, this way we can check if the replication
is ok.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will setup 2 cluster with rgw multisite enabled.
First cluster will act as the 'master', the 2nd will be the secondary
one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do not use @<device> anymore so we don't need to perform the
readlink check anymore.
Also we are making an exception for ooo which is still using ceph-disk.
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is now deprecated in ceph-ansible so let's convert all the ci
tests to use lvm instead of ceph-disk.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we are removing the ceph-disk test from the ci in master then
there is no need to have the functionnal tests in master anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
since we set `configure_firewall: true` in
`ceph-defaults/defaults/main.yml` there is no need to explicitly set it
in `centos7_cluster` and `docker_cluster` testing scenarios.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This approach doesn't work with all scenarios because it's comparing a
local OSD number expected to a global OSD number found in the whole
cluster.
This reverts commit b8ad35ceb9.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's get the osd tree from mons instead on osds.
This way we don't have to predict an OSD container name.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Three fixes:
- fix a typo in vagrant_variables that cause a networking issue for
containerized scenario.
- add containerized_deployment: true
- remove a useless block of code: the fact docker_exec_cmd is set in
ceph-defaults which is played right after.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding testing scenarios for day-2-operation playbook.
Steps:
- deploys a cluster,
- run testinfra,
- test idempotency,
- add a new osd node,
- run testinfra
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of now, we should no longer support Jewel in ceph-ansible.
The latest ceph-ansible release supporting Jewel is `stable-3.1`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The CI is still running ceph-disk tests upstream. So until
https://github.com/ceph/ceph-ansible/pull/3187 is merged nothing will
pass anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit does a couple of things:
* Avoid code duplication
* Clarify the code
* add more unit tests
* add myself to the author of the module
Signed-off-by: Sébastien Han <seb@redhat.com>
not gathering fact causes `package` module to fail because it needs to
detect which OS we are running on to select the right package manager.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
get more coverage by adding an RGW daemon collocated on osd0.
We've missed a bug in the past which could have been caught earlier in
the CI.
Let's add this additional daemon in order to have a better coverage.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If this is set to anything other than the default value of 1 then the
--osds-per-device flag will be used by the batch command to define how
many osds will be created per device.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is no point of using hosts running on atomic AND centos hosts. So
let's run containerized scenarios on Atomic only.
This solves this error here:
```
fatal: [client2]: FAILED! => {
"failed": true
}
MSG:
The conditional check 'ceph_current_status.rc == 0' failed. The error was: error while evaluating conditional (ceph_current_status.rc == 0): 'dict object' has no attribute 'rc'
The error appears to have been in '/home/jenkins-build/build/workspace/ceph-ansible-nightly-luminous-stable-3.1-ooo_collocation/roles/ceph-defaults/tasks/facts.yml': line 74, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: set_fact ceph_current_status (convert to json)
^ here
```
From https://2.jenkins.ceph.com/view/ceph-ansible-stable3.1/job/ceph-ansible-nightly-luminous-stable-3.1-ooo_collocation/37/consoleFull#1765217701b5dd38fa-a56e-4233-a5ca-584604e56e3a
What's happening here is all the hosts excepts the clients are running atomic, so here: https://github.com/ceph/ceph-ansible/blob/master/site-docker.yml.sample#L62
The condition will skipped all the nodes excepts the clients, thus when running ceph-default, the task "is ceph running already?" is skipped but the task above needs the rc of the skipped task.
This is not an error from the playbook, it's a CI setup issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
Using an explicitly named testing environment name allows us to have a
specific [testenv] block for this test. This greatly simplifies how it will
work as it doesn't really anything from the ceph cluster tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
jewel used to create a default `rbd` pool in the default crush root
`default`, we need to have at least 1 osd to satisfy the PGs for this
created pool, otherwise the cluster will be in HEALTH_ERR state because
of `pgs stuck unclean`/`pgs stuck inactive`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's create a dedicated environment for these scenarios, there is no
need to deploy everything.
By the way, doing so will save some times.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Ansible 2.4 is currently end-of-life.
Ansible 2.5 will go end-of-life after Ansible 2.7 is released.
Fixes: #2901
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The group_vars/all file is not available on 'ooo-collocation' scenario,
it's making the `dev_setup.yml` failing because this path is hardcoded.
The idea here is to check if the pattern 'ooo-collocation' is present in
`change_dir` variable so we can set this path properly according to the
scenario being run.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`test_rbd_mirror_is_up()` is failing on update scenarios because it
assumes the `ceph_stable_release` is still set to the value of the
original ceph release, it means it won't enter in the right part of the
condition and fails.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
34f70428 has introduced a fix using `command` module while this could
have been achieved by using `lvol` module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must initialize `children` variable in `_get_osd_id_from_host()`,
otherwise, if for any reason the deployment has failed and result with
an osd host with no OSD registered, we won't enter in the condition,
therefore, `children` is never set and the function tries to return
something undefined.
Typical error:
```
E UnboundLocalError: local variable 'children' referenced before assignment
```
Fixes: #2860
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should test ceph-ansible against the latest ansible stable version on
master.
This commit also remove the pinning to 1.7.1 version of testinfra
because ansible 2.5 requires a newer version.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
avoid duplicating test unnecessarily just because of docker exec syntax.
Using the same logic than in the playbook with `docker_exec_cmd` allow us
to execute the same test on both containerized and non containerized environment.
The idea is to set a variable `docker_exec_cmd` with the
'docker exec <container-name>' string when containerized and
set it to '' when non containerized.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
these tests are skipped on bluestore osds scenarios.
they were going to fail anyway since they are run on mon nodes and
`devices` is defined in inventory for each osd node. It means
`num_devices * num_osd_hosts` returns `0`.
The result is that the test expects to have 0 OSDs up.
The idea here is to move these tests so they are run on OSD nodes.
Each OSD node checks their respective OSD to be UP, if an OSD has 2
devices defined in `devices` variable, it means we are checking for 2
OSD to be up on that node, if each node has all its OSD up, we can say
all OSD are up.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since ooo_collocation scenario is supposed to be the same scenario than the
one tested by OSP and they are not passing `rgw_create_pools` the test
`test_docker_rgw_tuning_pools_are_set` will fail:
```
> pools = node["vars"]["rgw_create_pools"]
E KeyError: 'rgw_create_pools'
```
skipping this test if `node["vars"]["rgw_create_pools"]` is not defined
fixes this failure.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
At the moment, a lot of tests are skipped when daemons are collocated.
Our tests consider a node belong to only 1 group while it's possible for
certain scenario it can belong to multiple groups.
Also pinning to pytest 3.6.1 so we can use `request.node.iter_markers()`
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It might happen that the list of ips/hosts in following line (ceph.conf)
- `mon initial memebers = <hosts>`
- `mon host = <ips>`
are not ordered the same way depending on deployment.
This patch makes the tests looking for each ip or hostname in respective
lines.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
adding more node in this scenario could help to have a better coverage
so we can catch more potential bugs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `latest` points to `mimic`, we need to force the test to keep the
same ceph release when testing anything else than `mimic`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we see more and more failure like `fatal: [mon0]: UNREACHABLE! => {}` in
`centos7_cluster` scenario, Since we have 30Gb RAM on hypervisors, we
can give monitors a bit more RAM. By the way, nodes on containerized cluster
testing scenario have already 1024Mb memory allocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't have the same service running on non-container for now, this
will change soon but for let's only run the test on container.
Signed-off-by: Sébastien Han <seb@redhat.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
We test if:
* packages are installed
* services are runnning
* service units are enabled
Also fix linting issues
Signed-off-by: Sébastien Han <seb@redhat.com>
Update the inventory host for tripleo testing scenario so it's the same
parameters than in tripleo CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Functional tests are broken when testing against 'dev' release (ceph).
Adding a dummy value here will make it possible to run ceph-ansible CI
against dev ceph release.
Typical error:
```
> if request.node.get_marker("from_luminous") and ceph_release_num[ceph_stable_release] < ceph_release_num['luminous']:
E KeyError: 'dev'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1487d93f21b609a637053f5b33cd2a4e408d00)
the expected number of mds daemon consist of number of daemons that are
'up' + number of daemons 'up:standby'.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
41b4632 has introduced a change in functionnals tests.
Since the admin keyring isn't copied on rgw nodes anymore in tests, let's use
the rgw keyring to achieve them.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The admin key must be copied on the osd nodes only when we test the
shrink scenario. Shrink relies on ceph-disk commands that require the
admin key on the node where it's being executed.
Now we only copy the key when running on the shrink-osd scenario.
Signed-off-by: Sébastien Han <seb@redhat.com>
Refact of 8704144e31
There is no need to have duplicated tasks for this. The rgw pools
creation should be delegated on a monitor node se we don't have to care
if the admin keyring is present on rgw node.
By the way, only one task is needed to create the pools, we just need to
use the `docker_exec_cmd` fact already defined in `ceph-defaults` to
achieve it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1550281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the tests, the remote epel repository is generating a lots of
errors leading to broken jobs (issue #2666)
This patch is about using a local repository instead of a random one.
To achieve that, we make a preliminary install of epel-release, remove
the metalink and enforce a baseurl to our local http mirror.
That should speed up the build process but also avoid the random errors
we face.
This patch is part of a patch series that tries to remove all possible yum failures.
Signed-off-by: Erwan Velu <erwan@redhat.com>
ceph command has to be executed from one of the monitor containers
if not admin copy present in RGWs. Task has to be delegated then.
Adds test to check proper RGW pool creation for Docker container scenarios.
Signed-off-by: Jorge Tudela <jtudelag@redhat.com>
When playing ceph-mds role, mon nodes have set a fact with the default
pg num for osd pools, we can simply default to this value for cephfs
pools (`cephfs_pools` variable).
At the moment the variable definition for `cephfs_pools` looks like:
```
cephfs_pools:
- { name: "{{ cephfs_data }}", pgs: "" }
- { name: "{{ cephfs_metadata }}", pgs: "" }
```
and we have a task in `ceph-validate` to ensure `pgs` has been set to a
valid value.
We could simply avoid this check by setting the default value of `pgs`
to `hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num']` and
let to users the possibility to override this value.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1581164
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`requirements2.5.txt` is pointing to `tests/requirements2.4.txt` while
it should point to `requirements2.4.txt` since they are in the same
directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
For a few moment we can see failures in the CI for containerized
scenarios because VMs are running out of space at some point.
The default in the images used is to have only 3Gb for root partition
which doesn't sound like a lot.
Typical error seen:
```
STDERR:
failed to register layer: Error processing tar file(exit status 1): open /usr/share/zoneinfo/Atlantic/Canary: no space left on device
```
Indeed, on the machine we can see:
```
Every 2.0s: df -h Tue May 29 17:21:13 2018
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 3.0G 3.0G 14M 100% /
```
The idea here is to expand this partition with all the available space
remaining by issuing an `lvresize` followed by an `xfs_growfs`.
```
-bash-4.2# lvresize -l +100%FREE /dev/atomicos/root
Size of logical volume atomicos/root changed from <2.93 GiB (750 extents) to 9.70 GiB (2484 extents).
Logical volume atomicos/root successfully resized.
```
```
-bash-4.2# xfs_growfs /
meta-data=/dev/mapper/atomicos-root isize=512 agcount=4, agsize=192000 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0 spinodes=0
data = bsize=4096 blocks=768000, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 768000 to 2543616
```
```
-bash-4.2# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 9.7G 1.4G 8.4G 14% /
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In the CI we can see at many times failures like following:
`Failure talking to yum: Cannot find a valid baseurl for repo:
base/7/x86_64`
It seems the fastest mirror detection is sometimes counterproductive and
leads yum to fail.
This fix has been added in the `setup.yml`.
This playbook was used until now only just before playing `testinfra`
and could be used before running ceph-ansible so we can add some
provisionning tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Erwan Velu <evelu@redhat.com>
let's move this variable in group_vars/all.yml in all testing scenarios
accordingly to this commit 1f15a81c48 so
we keep consistency between the playbook and the tests.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The NSS PKI database is needed only if radosgw_keystone_ssl
is explicitly set to true, otherwise the SSL integration is
not enabled.
It is worth noting that the PKI support was removed from Keystone
starting from the Ocata release, so some code paths should be
changed anyway.
Also, remove radosgw_keystone, which is not useful anymore.
This variable was used until fcba2c801a.
Now profiles drives the setting of rgw keystone *.
Signed-off-by: Luigi Toscano <ltoscano@redhat.com>
As of ceph 12.2.5 the type of the parameter `type` is not a name anymore but
an id, therefore an `int` is expected otherwise it will fail with the
following error
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in case of multimds we must check for the number of mds up instead of
just checking if the hostname of the node is in the fsmap.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These are already handled by ceph-client/defaults/main.yml so the keys
will be created once user_config is set to True.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now that we are using ceph_volume_zap the partitions are
kept around and should be able to be reused.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Prior to this patch, the certificates where being generated on a single
node only (because of the run_once: true). Thus certificates were not
distributed on all the gateway nodes.
This would require a second ansible run to work. This patches fix the
creation and keys's distribution on all the nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1540845
Signed-off-by: Sébastien Han <seb@redhat.com>
We should stop putting everything in 'all'. This is too easy and this is
error prone as well for those who are separating variables into host
type, things that you should do.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now run tests on the newly created ceph_crush module. Now the CI will
create a specific hierarchy for the OSD.
Signed-off-by: Sébastien Han <seb@redhat.com>
The ceph-ansible upstream CI runs severals tests, including a
'idempotency/handlers' test. It means the playbook is run a first time
and then a second time with an other container image version to ensure the
handlers run properly and the containers are well restarted.
This can cause issues.
For instance, in that specific case which drove me to submit this commit,
I've hit the case where `latest` image ships ceph 12.2.3 while the `stable-3.0`
(which is the image used for the second run) ships ceph 12.2.2.
The goal of this test is not to verify we can upgrade from a specific
version to another but to ensure handlers are working even if it's a valid
failure here.
It should be caught by a test dedicated to that usecase.
We just need to have a container image which has a different id for
the upstream CI, we need the same content in container imagebut a different
image id in the registry since the test relies on image id to decide whether
the container should be restarted.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we have a task to test the handlers we can test a new container to
validate the service restart on a new container image.
Signed-off-by: Sébastien Han <seb@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The --crush-device-class flag for ceph-volume is not available in luminous so lets
remove this testing option for now until it's more widely available.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When deploying Jewel from master we still need to enable this code since
the container image has such check. This check still exists because
ceph-disk is not able to create a GPT label on a drive that does not
have one.
Signed-off-by: Sébastien Han <seb@redhat.com>
the entrypoint to generate users keyring is `ceph-authtool`, therefore,
it can expand the `$(ceph-authtool --gen-print-key)` inside the
container. Users must generate a keyring themselves.
This commit also adds a check to ensure keyring are properly filled when
`user_config: true`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a missing test `test_rbd_mirror_service_is_running_from_luminous()`.
Also using bash -c "<cmd>" to make testinfra aware that later in
the upgrade process we are now running `luminous` ceph release so we
must skip the rbd tests related to `jewel` ceph release.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph-ansible is now being testing against ansible2.2 and ansible2.4. We
need to update tox.ini so we use the right version of testinfra
regarding which ansible version we are using.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit add new osd scenarios, it aims to simplify the CI setup and
brings a better coverage on the OSD scenarios.
We decided to differentiate between filestore and bluestore, thinking
ahead when filestore won't be supported anymore.
So we now have two classes of tests:
* Filestore
* Bluestore
In each of those classes we have container and non-container.
Then for each we test the following:
* collocated
* collocated dmcrypt
* non-collocated
* non-collocated dmcrypt
* auto discovery collocated
* auto discovery collocated dmcrypt
This gives us a nice coverage and also reduces the footprint on the CI.
We are now up to 4 scenarios, each containing 6 OSD VMs.
Signed-off-by: Sébastien Han <seb@redhat.com>
1. add the variables to docker_collocation
2. trigger the check when a MDS is part of the inventory file, not when
we run on an MDS...
Signed-off-by: Sébastien Han <seb@redhat.com>
vagrant is serialized and takes a lot of time compare to simple reboot.
See the benchmarks below for 3 VMs:
[leseb@rick docker]$ time ANSIBLE_SSH_ARGS="-F
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/vagrant_ssh_config" ansible-playbook -i /home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/hosts reboot.yml
PLAY [mons]
****************************************************************************************************************************************************************************************************
TASK [Gathering Facts]
*****************************************************************************************************************************************************************************************
ok: [mon1]
ok: [mon2]
ok: [mon0]
TASK [restart machine]
*****************************************************************************************************************************************************************************************
changed: [mon2]
changed: [mon1]
changed: [mon0]
TASK [wait for server to boot]
*********************************************************************************************************************************************************************************
ok: [mon2 -> localhost]
ok: [mon0 -> localhost]
ok: [mon1 -> localhost]
TASK [uptime]
**************************************************************************************************************************************************************************************************
changed: [mon2]
changed: [mon0]
changed: [mon1]
PLAY RECAP
*****************************************************************************************************************************************************************************************************
mon0 : ok=4 changed=2 unreachable=0
failed=0
mon1 : ok=4 changed=2 unreachable=0
failed=0
mon2 : ok=4 changed=2 unreachable=0
failed=0
real 0m35.112s
user 0m5.737s
sys 0m1.849s
[leseb@rick docker]$ time vagrant reload
==> mon0: Halting domain...
==> mon0: Starting domain.
==> mon0: Waiting for domain to get an IP address...
==> mon0: Waiting for SSH to become available...
==> mon0: Creating shared folders metadata...
==> mon0: Rsyncing folder:
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/
=> /home/vagrant/sync
==> mon0: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> mon0: flag to force provisioning. Provisioners marked to run always
will still run.
==> mon1: Halting domain...
==> mon1: Starting domain.
==> mon1: Waiting for domain to get an IP address...
==> mon1: Waiting for SSH to become available...
==> mon1: Creating shared folders metadata...
==> mon1: Rsyncing folder:
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/
=> /home/vagrant/sync
==> mon1: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> mon1: flag to force provisioning. Provisioners marked to run always
will still run.
==> mon2: Halting domain...
==> mon2: Starting domain.
==> mon2: Waiting for domain to get an IP address...
==> mon2: Waiting for SSH to become available...
==> mon2: Creating shared folders metadata...
==> mon2: Rsyncing folder:
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/
=> /home/vagrant/sync
==> mon2: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> mon2: flag to force provisioning. Provisioners marked to run always
will still run.
real 1m31.850s
user 0m7.387s
sys 0m0.796s
Reboot via Ansible: 0m35.112s
Reboot via vagrant: 1m31.850s
We save 1/3 time.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have a variable called ceph_pools that is mandatory when
deploying a MDS.
It's a dictionnary that contains a pool name and a PG count. PG count is
mandatory and must be set, the playbook will fail otherwise.
Closes: https://github.com/ceph/ceph-ansible/issues/2017
Signed-off-by: Sébastien Han <seb@redhat.com>
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
- the rbd-mirror unit systemd name is not the same when running jewel vs
luminous.
- servicemap is not available on jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we introduced collocation testing scenario, we need to adapt
current tests to this new scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we don't do this the client will create pools with a replica 3 since
osd_pool_default_size was gone in ceph-override.json. This was making
switch_to_containers failing.
Signed-off-by: Sébastien Han <seb@redhat.com>
Shared folder is not required for tests.
We should avoid hitting the error :
```
uninitialized constant VagrantPlugins::ProviderLibvirt::Action::ShareFolders
```
Also, disabling it might reduce the needed time in certains cases for the VMs
to be started.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If two environments are using the same subnet, we will get trouble
because of ips addresses conflicts.
This commit ensures each scenario has a uniq subnet for both public and cluster
network so we can setup several test environment at a time on a same hypervisor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the path `/dev/disk/by-path/pci-0000:00:01.1-ata-1.0` doesn't exist.
it has to be changed to `/dev/disk/by-path/pci-0000:00:01.1-ata-1`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the code regarding all `set_osd_pool_default_*`
related tasks by avoiding usage of useless `set_fact` to determine
whether a key is present in `ceph_conf_overrides`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we don't bootstrap the mgr after the mon and the osds handler are
called, we will never be able to reach a clean state since the pgs
stats are handled by the mgr. This also happens when doing daemon
collocation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1493920
Signed-off-by: Sébastien Han <seb@redhat.com>
This test doesn't work at the moment and need to be fixed.
Disabling it temporary to avoid errors in the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On a container env, machines don't have any ceph binaries so we need to
use a container to run the commands.
Signed-off-by: Sébastien Han <seb@redhat.com>
Delete these before creating them incase they are left around in a purge
cluster testing scenario. The purge-cluster.yml playbook does not
currently remove partitions used for journals.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The partition only needs created and given a gpt label so that a
PARTUUID will exist on the partition.
This task also makes the purge_lvm_osds scenario fail on the second
deployment after purging.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Prior to this patch this activation sequence for autodetection was
always skipped because we were asking to activate on device without
partitions, which doesn't make sense.
We also fix the way we lookup for a device, since the data partition is
always numbered 1, we take the min element of the dict.
Closes: https://github.com/ceph/ceph-ansible/issues/1782
Signed-off-by: Sébastien Han <seb@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we need to force the value of `docker` variable which is initially set
to `false` since it's a migration from non-containerized to
containerized cluster.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The installation process is now described as follow:
* you still have to choose a 'ceph_origin' installation method. The
origin can be a 'repository' (add a new repository), distro (it will use
the packages provided by the native repo source of your distribution),
local (only available on redhat system, it installs locally built
packages). This option is not well tested, so use it carefully
* if ceph_origin == 'repository' you will have to decide what kind of
repository you want to enable:
- community: corresponds to the stable upstream/community version
- enterprise: corresponds to the stable enterprise/downstream version
(basically you are a red hat customer)
- dev: it will install ceph from packages built out of the github
development branches
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The lvm_volumes variable is now a list of dictionaries that represent
each OSD you'd like to deploy using ceph-volume. Each dictionary must
have the following keys: data, journal and data_vg. Each dictionary also
can optionaly provide a journal_vg key.
The 'data' key represents the lv name used for the OSD and the 'data_vg'
key is the vg name that the given lv resides on. The 'journal' key is
either an lv, device or partition. The 'journal_vg' key is optional and
must be the vg name for the journal lv if given. This key is mainly used
for purging of the journal lv if purge-cluster.yml is run.
For example:
lvm_volumes:
- data: data_lv1
journal: journal_lv1
data_vg: vg1
journal_vg: vg2
- data: data_lv2
journal: /dev/sdc
data_vg: vg1
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves issue: Multiple RGW Ceph.conf Issue #1258
In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.
Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com
Modified ceph-defaults and ran generate_group_vars_sample.sh
group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.
Uncommented added variables in ceph-defaults
Updated tests by adding value for radosgw_interface
Added radosgw_interface to centos cluster tests
Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh
In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
When you udpate to the latest version of the centos/7 box it always puts
the OS on /dev/sda, so do not use it as an OSD.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
Dimitri Savineau
Rishabh Dave
Mike Christie
Guillaume Abrioux
fmount
L3D
Andrew Schoen
Ali Maredia
Ramana Raja
Noah Watkins
guihecheng
Alfredo Deza
Sébastien Han
Erwan Velu
jtudelag
Luigi Toscano
John Fulton
Major Hayden
Andrew Schoen
SirishaGuduru
Alfredo Deza