We were activating dmcrypt devices with the wrong command. Basically the
first task execute the wrong activate command. The task fails but
continues because of the 'failed_when: false'. Then the right activation
sequence is being done by the next task.
Signed-off-by: Sébastien Han <seb@redhat.com>
there is no need to have a condition on this task, this test should be
always run since the result will be interpreted later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will prevent ceph-ansible from using a loop device while it
shouldn't in auto_discovery mode.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use `devices` variable instead of `ansible_devices`, otherwise it means
we are not using the devices which have been 'auto discovered'
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current code will also return lvm devices such as /dev/dm-2, this
kind of device type is not supported by ceph-disk at the moment. Now we
just ignore them.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the initial implementation of this 'old' thing we were falling
into this issue without noticing
https://github.com/moby/moby/issues/30341 and where blindly using --rm,
now this is fixed the prepare container disappears and thus activation
fail.
I'm fixing this for old jewel images.
Also this fixes the machine reboot case where the docker logs are
purgend. In the old scenario, we now store the log locally in the same
directory as the ceph-osd-run.sh script.
Signed-off-by: Sébastien Han <seb@redhat.com>
There was a huge resync from luminous to jewel in ceph-docker:
https://github.com/ceph/ceph-docker/pull/797
This change brought a new handy function to discover partitions tight to
an OSD. This function doesn't exist in the old image so the
ceph-osd-run.sh script breaks when trying to deploy Jewel OSD with that
old Jewel image version.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit add new osd scenarios, it aims to simplify the CI setup and
brings a better coverage on the OSD scenarios.
We decided to differentiate between filestore and bluestore, thinking
ahead when filestore won't be supported anymore.
So we now have two classes of tests:
* Filestore
* Bluestore
In each of those classes we have container and non-container.
Then for each we test the following:
* collocated
* collocated dmcrypt
* non-collocated
* non-collocated dmcrypt
* auto discovery collocated
* auto discovery collocated dmcrypt
This gives us a nice coverage and also reduces the footprint on the CI.
We are now up to 4 scenarios, each containing 6 OSD VMs.
Signed-off-by: Sébastien Han <seb@redhat.com>
This patch changes the `when:` keys so that they have no jinja2
delimiters. This avoids Ansible warnings which could turn into
errors in a future Ansible release.
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
Use an intermediate variable to build the final `dedicated_devices` list
to avoid duplicate entry in that array. (We need a 1:1 relation between
`dedicated_devices` and `devices` since we are using a `with_together`
later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
All keyring are getting copied to all nodes.
This commit fixes a leftover from a previous code refactor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498583
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is to ensure `docker_exec_cmd` fact is set with the correct value
in case of daemons collocation
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Using systemd module allows us to do in one task what we did in three
tasks:
- enable unit file,
- issue a `daemon-reload`,
- start the service
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This fixes the error :
```
The conditional check 'sestatus.stdout != 'Disabled'' failed.
```
that occurs when running on non rhel based system since the
`sestatus` fact is registered only on rhel based distribution.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We generate the ceph.conf on all the nodes through the
ceph-docker-common so there is no need to push it to the Ansible file.
Also this is breaking the ceph.conf template generation since we only
generate sections based on the host the ansible task is running on.
For example, what's typically happening, we bootstrap the monitor, we
get a ceph.conf generated for a mon only, we go on an osd, we generate
the ceph.conf with osd section (done by ceph-docker-common) but this
gets overwritten by the copy_config task of the ceph-osd role.
Signed-off-by: Sébastien Han <seb@redhat.com>
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
All keys are copied to all nodes.
This commit split that task in each roles so keys are copied to their
respective nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1488999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch this activation sequence for autodetection was
always skipped because we were asking to activate on device without
partitions, which doesn't make sense.
We also fix the way we lookup for a device, since the data partition is
always numbered 1, we take the min element of the dict.
Closes: https://github.com/ceph/ceph-ansible/issues/1782
Signed-off-by: Sébastien Han <seb@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The script can fail to get the osd id because the osds are activated by
udev and it can take a while for them to activate. This commit fixes
that by trying to get all the osds per node in a loop.
This commit also makes the osd services enabled so that they are
available after reboot.
Signed-off-by: Boris Ranto <branto@redhat.com>
The lvm_volumes variable is now a list of dictionaries that represent
each OSD you'd like to deploy using ceph-volume. Each dictionary must
have the following keys: data, journal and data_vg. Each dictionary also
can optionaly provide a journal_vg key.
The 'data' key represents the lv name used for the OSD and the 'data_vg'
key is the vg name that the given lv resides on. The 'journal' key is
either an lv, device or partition. The 'journal_vg' key is optional and
must be the vg name for the journal lv if given. This key is mainly used
for purging of the journal lv if purge-cluster.yml is run.
For example:
lvm_volumes:
- data: data_lv1
journal: journal_lv1
data_vg: vg1
journal_vg: vg2
- data: data_lv2
journal: /dev/sdc
data_vg: vg1
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
To be properly evaluated the "skipped" conditions must always have the
first place on the list of condition, otherwise the other conditions are
evaluated before and make the task fail.
Closes: https://github.com/ceph/ceph-ansible/issues/1733
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph services can fail to start under certain circumstances (for
example, when running in a container) because the default systemd
service configuration causes namespace issues.
To work around this we can override the system service settings by
placing an overrides file in the ceph-<service>@.service.d directory.
This can be generic so as to allow any potential changes required to
the ceph-<service> service files.
The overrides file is only setup when the
"ceph_<service>_systemd_overrides" config_template override variable is
specified.
The available service systemd override files are as follows:
ceph_mds_systemd_overrides
ceph_mgr_systemd_overrides
ceph_mon_systemd_overrides
ceph_osd_systemd_overrides
ceph_rbd_mirror_systemd_overrides
ceph_rgw_systemd_overrides
This scenario will create OSDs using ceph-volume and is only available
in ceph releases greater than Luminous.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
We have multiple issues with ceph-disk's cli with bluestore and Ceph
releases. This is mainly due to cli changes with Luminous. Luminous
introduced a --bluestore and --filestore options which respectively does
not exist on releases older than Luminous. The default store being
bluestore on Luminous, simply checking for the store is not enough so we
have to build a specific command line for ceph-disk depending on the
Ceph version we are running and the desired osd_store.
Signed-off-by: Sébastien Han <seb@redhat.com>
In Luminous, ceph-disk defaults to bluestore so all our scenarios are
using bluestore, we need to force testing both.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Fail with a sane message if the devices or raw_journal_devices variables
are strings instead of lists during manual device assignment.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
This commits refactors how we deploy bluestore. We have existing
scenarios that we don't want to change too much. This commits eases the
user experience by now changing the way you use scenarios. Bluestore is
just a different interface to store objects but the scenarios more or
less remain the same.
If you set osd_objectstore == 'bluestore' along with
journal_collocation: true, you will get an OSD running bluestore with DB
and WAL partitions on the same device.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true, you will get an OSD running bluestore with a
dedicated drive for the rocksdb DB, then the remaining
drives (used with 'devices') will have WAL and DATA collocated.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true and declare bluestore_wal_devices you will get
an OSD running bluestore with a dedicated drive for rocksdb db, a
dedicated drive partition for rocksdb WAL and a dedicated drive for
DATA.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need for 2 variables to enable bluestore, prior to this
patch one had to do the following to activate bluestore:
osd_objectstore: bluestore
bluestore: true
Now you just need to set `osd_objectstore: bluestore`.
Fixes: https://github.com/ceph/ceph-ansible/issues/1475
Signed-off-by: Sébastien Han <seb@redhat.com>
Followup on https://github.com/ceph/ceph-ansible/pull/1469 where we
merged most of the container code from roles/ceph-*/task/docker/*.yml
into roles/ceph-docker-common/tasks/
It seems that we forgot to remove the original files.
Signed-off-by: Sébastien Han <seb@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to `196fa7e` this commit check if a container has been
already launched and delete it before retrying the ceph osd prepare
process.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Proof-of-concept clusters or actual production clusters will never want to use this. We also do not test it anywhere for this same reason.
Signed-off-by: Gregory Meno <gmeno@redhat.com>
Ansible's assemble module by default will put all files in the src
directory together into dest. We only want to put {{ cluster }}.conf
and osd.conf together, not anything that might have found its way into
/etc/ceph/ceph.d (e.g. files left by the sysadmin taking backups
before an ansible run). So specify a regexp that matches only those
two files.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
As reported in
https://github.com/ceph/ceph-ansible/issues/1403 when devices are held
by lvm and `osd_auto_discovery` is set to true, it's not enough to check
for a partition count = 0 since Ansible does not report.
This patch also looks for 'holders' which in a case of lvm corresponds
to the name of the pv. Now we also look for holders = 0.
Fixes: #1403
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
Install package from official repos rather than pip when using RHEL.
This commit fix https://bugzilla.redhat.com/show_bug.cgi?id=1420855
Also this commit Refact all `roles/ceph-*/tasks/docker/pre_requisite.yml`
to avoid a lot of duplicated code.
Fix: #1303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Oh yeah! This patch adds more fine grained control on how we run the
activation osd container. We now use --device to give a read, write and
mknodaccess to a specific device to be consumed by Ceph. We also use
SYS_ADMIN cap to allow mount operations, ceph-disk needs to temporary
mount the osd data directory during the activation sequence.
This patch also enables the support of dedicated journal devices when
deploying ceph-docker with ceph-ansible.
Depends on https://github.com/ceph/ceph-docker/pull/478
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Andrew Schoen
Guillaume Abrioux
yaoning
Alfredo Deza
Major Hayden
John Fulton
Michel Rode
Boris Ranto
Andy McCrae
yanyx
Douglas Fuller
Austin Workman
Andrew Schoen
Pascal Watteel
David Galloway
Alberto Murillo
Gregory Meno
Matthew Vernon
Daniel Horak
Tobias Florek