There is no need to become root on local_action. This will event trigger
an error on some systems as it will try to run a sudo command. If the
current user does not have passwordless sudo, Ansible will fail. Anyway
using the current user is perfectly fine and no elevation privilege is
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the initial mon keyring
doesn't exist so we are generating a new one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do not need to run another condition for 'ceph_rhcs' since the
include we came from already has it, so we are already inside this
condition.
We also spell red hat entirely instead of rh and we remove capital
letters.
Signed-off-by: Sébastien Han <seb@redhat.com>
When `ceph_stable_rh_storage` is True, every cluster node should have a
`/etc/apt/preferences.d/rhcs.pref` file with the following contents:
```
Explanation: Prefer Red Hat packages
Package: *
Pin: release o=/Red Hat/
Pin-Priority: 999
```
ceph-deploy already did this when used with ice-setup, and we need to do
the same thing with the ceph-ansible stack.
Closes: #1182 and https://bugzilla.redhat.com/show_bug.cgi?id=1404515
Signed-off-by: Sébastien Han <seb@redhat.com>
Only when ceph_origin == "upstream", install_on_redhat.yml will include
redhat_ceph_repository.yml, same as debian.
In redhat_ceph_repository.yml, ceph_custom_repo will be added.
But in check_mandatory_vars.yml, ceph_origin=="upstream" can't be combined
with ceph_custom
For readibility and clarity we do not run any tasks directly in the
main.yml file. This file should only contain include, which helps us
later to apply conditionnals if we want to.
Signed-off-by: Sébastien Han <seb@redhat.com>
mon_group_name variable can be used to override mons group, but
this task assumes the group is always 'mons'. So we need to use
the var to find the group name instead.
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the fsid doesn't exist so we
are creating a new one. Later the ceph.conf gets updated with a wrong
fsid which causes problems for clients and ceph processes.
Closes: #1148
Signed-off-by: Sébastien Han <seb@redhat.com>
Refactor the code using 'package' module
Fix Issue #520
(However it doesn't cover all cases because some cases are not refactorable.
Ex: because of diverging packages name between distribution)
libfcgi is dead upstream (http://tracker.ceph.com/issues/16784)
The RGW developers intend to remove libfcgi support entirely before the
Luminous release.
Since libfcgi gets little-to-no developer attention or testing, remove
it entirely from ceph-ansible.
This is done for preventing of their use-before-definition for osd scenarios checks (should be removed after a refactor has properly seperated all the checks into appropriate roles).
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
For some providers (such as upcoming Linode support), some NICs may have
multiple IP addresses. (In the case of Linode, the only NIC has a public
and private IP address.) This is normally okay as we can use the
ceph.conf cluster_network and public_network variables to force the
monitor to listen on the addresses we want. However, we also need
ansible to set the correct monitor IP addresses in "mon hosts" (i.e. the
addresses the monitors will listen on!). This new monitor_address_block
setting tells ansible which IP address to use for each monitor.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
- Move fsal_rgw config to ceph-common, as it's shaered with ceph-rgw
- Update all.docker.sample with NFS config
- Rename fsal_rgw to nfs_obj_gw and fsal_ceph to nfs_file_gw, because
the former names mean nothing to non-Ganesha developers
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
-First install ceph into a directory with CMake
cmake -DCMAKE_INSTALL_LIBEXECDIR=/usr/lib -DWITH_SYSTEMD=ON -DCMAKE_INSTALL_PREFIX:PATH:=/usr <ceph_src_dir> && make DESTDIR=<install_dir> install/strip
-Ceph-ansible copies over the install_dir
-User can use rundep_installer.sh to install any runtime dependencies that ceph needs onto the machine from rundep
* changed s/colocation/collocation/
* declare dmcrypt variable in ceph-common so the variables check does
not fail
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes#845 for containerized deployments. We now also mount the
/etc/localtime volume in the containers in order to synchronize the host
timezone with the container timezone.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Journal size is not mandatory anymore, a default from 5GB is being
added. A simple warning message will show up if the size is set to
something below 5GB.
Signed-off-by: Sébastien Han <seb@redhat.com>
The ceph-common role fails when you run ansible with --check. Adding
always_run to a few tasks makes the check go through easier (although
it's not foolproof).
This will help if the path to the iso exists in the originating server but not
in the remote paths. This issue is not seen if using /tmp/file.iso but does
show up when using nested paths.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: rhbz#1355762
init_system was getting the value of "systemd\n"
and was later compared to be equal to "systemd"
making the wrong scripts to be executed.
Signed-off-by: Alberto Murillo <alberto.murillo.silva@intel.com>
Add the ability to use a custom repo, rather than just upstream, RHEL,
and distro. This allows ansible to be used for internal testing.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
If the docker image cannot be retrieved we will fail this task silently
and the playbook ultimately succeeds without a successful deployment.
This change makes it so we fail the playbook immediately.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Ceph has the ability to export it's filesystem via NFS using Ganesha.
Add a ceph-nfs role that will start Ganesha and export the Ceph
filesystems.
Note that, although support is going in to export RGW via NFS, this is
not working yet.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
- Check for nmap being available was not running as a local_action, when the checks using nmap were
- Various fixes on Ansible 2.x now that the above is working
Docker makes it difficult to use images that are not on signed
registries. This is a problem for developers, who likely won't have
access to a registry with proper signed certificates.
This allows the ability to use any docker image on the machine running
vagrant/ansible. The way it works is that the image in question is
exported locally, then sent to each target box and imported there.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
This will allow nodes to install rhcs that do
not have access to the internet.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: rhbz#1337601
In order to align all Ansible versions, we now use the full path for the
template. We rely on `role_path` variable. Now all the tasks using
the template module have a uniform syntax.
Might fix issue raised in #483
Signed-off-by: Sébastien Han <seb@redhat.com>
The scenarios were not being accurately compared to ensure that:
* A single scenario was choosen
* ONLY a single scenario was choosen
This solution does not scale for long, but that can be addressed in a
different patchset.
By default, this roles will create a ceph config file and get the admin
key. You can optionnally add other users, keys and pools for your tests.
Closes: #769
Signed-off-by: Sébastien Han <seb@redhat.com>
Add support to allow ceph-ansible to install and
configure Ceph on Debian on the ppc64le architecture.
Canonical has ppc64le Debian packages in Ubuntu distros
and on Ubuntu Cloud Archive. Both of which can be installed
and configured using the 'distro' or 'uca' options in
ceph-ansible when this patch is used.
Signed-off-by: Samuel Matzek <smatzek@us.ibm.com>
This is purely a refactor. Converts when 'and' conditionals into lists
rather than multiline strings. This does not work for nested
conditionals, but those can be formated with indents.
Moves one line when statements onto the same line as the when command
itself.
A small logic bug was found in ceph-osd/tasks/check_devices.yml which
which was also fixed.
Signed-off-by: Sam Yaple <sam@yaple.net>
This adds a helper fact that uses the ``init_system`` fact to determine if
we should be using systemd or not when controlling services.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The ceph-osd role currently uses ansible_service_mgr, which is a fact
only available on ansible 2.x and greater. This commit sets a similar
fact called init_system which will store the contents of /proc/1/comm
(systemd, init, etc.) and then references it ceph-osd instead.
Closes#741
This adds support to allow the install of Ceph from the
Ubuntu Cloud Archive. The Ubuntu Cloud Archive provides newer
release of Ceph than the normal Ubuntu distro repository.
Signed-off-by: Samuel Matzek <smatzek@us.ibm.com>
Since developement versions of Ceph are after infernalis a package split
happened. So basically ceph-mon, ceph-osd, ceph-mds need to be
installed.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will allow a user to conditionally install the ceph package on rpm
based systems. Installing this package is not required or wanted in
versions passed infernalis.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Instead of creating the RBD client socket path three different places
in three different ways, this creates it once. Ceph on OpenStack users
have the option to customize the permissions of the RBD client
directories.
Fixes#687
we now have the ability to enable the `cluster` variable with a specific
value that will determine the name of the cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Some versions (?) of libvirt provide a 'libvirt' group instead of
'libvirtd'. (Observed with libvirt-daemon-1.2.17-13.el7_2.2.x86_64.)
This makes the RBD client directory owner and group configurable to
allow for this.
This would allow users who don't know what interface to provide to
give an IP address to use for the monitor instead.
Note: the includes are needed in ceph.conf.j2 because without them
jinja2 can not properly evaluate the template and will complain about a
missing 'ansible_interface' variable. The includes allow the template to
be evaluated correctly and then the correct include will be used during
render time.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Where it was located before meant it might be skipped if you don't run
tasks with the package-install tag. This fixes the situation where you
want to configure an rhcs node, but do not want to do any package
installs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When installing RHCS there is an option to install from distro provided
packages, this commit modifies the check to allow that to happen.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
changing the name of the directory causes issues with git subtree which
will create new commits. Creating a symlink for vagrant to be happy.
Signed-off-by: Sébastien Han <seb@redhat.com>
in order to have a build on the galaxy we need to have a proper
dependency set for ceph-common. On the galaxy ceph-common does not
exist, only ceph.ceph-common is available.
Signed-off-by: Sébastien Han <seb@redhat.com>
0644 should never be a directory mode. 1777 makes it so that any user
can create a ceph client, not just root. (This is helpful if, for
instance, nova-compute is running as non-root.)
If using another method to generate a consistent fsid, then we can
skip creation of an (unused) cluster UUID file. If cephx is disabled
as well, we can skip creation of the fetch directory entirely.
The firewall checks can fail for any number of reasons -- e.g., the
ceph cluster hostnames are unresolvable from the ansible host, or the
ports are filtered by some intermediate hop, etc. Make two changes to
make those checks better:
* Set pipefail when running the checks, so if nmap itself fails the
command will be marked as 'failed'. Specifically, this fixes the
case where the hostnames cannot be resolved.
* Add a new variable, check_firewall, which can be used to disable
checks entirely. Specifically, this fixes the case where some
intermediate firewall filters the ports, so nmap returns "filtered".
Installs on RHEL with ceph_origin set to distro previously would fail
because no packages would get installed, but all of the checks passed
fine. This adds support for ceph_origin: distro, simply installing the
packages using yum/dnf and assuming that the sysadmin has provided a
repository containing them.
This also supports the use case where Satellite or a similar local
mirror is in use, and the admin does not or cannot use the additional
repositories the role would otherwise add.
In our use case we might only be configuring mons and not osds in the
same call, so we don't want to check variables needed for osds when they
are not needed to configure a mon.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Currently deploying a MON fails with "bad symbolic permission for mode"
errors due to the file/directory modes not being interpreted as octal
values. This commit updates roles/ceph-common/tasks/main.yml to set
the file/directory modes to strings so they can be interpreted
correctly.
Closes issue #525
At the moment, all the tasks using the file module are duplicated to have differents ownerships depending on the fact `is_ceph_infernalis`.
The goal of this commit is to have a new logic for this:
- First set facts depending on the `is_ceph_infernalis` fact
- Create the files or directories using the setted facts as ownerships.
We have a requirement to install the packages first without
configuration. These tags should allow us to target the tasks need to do
that.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
as reported in #510 some systems don't have uuidgen installed so we
better use a more global way to generate it. It sounds like python
should be available in case uuidgen is not.
Otherwise we will have to find another way :)
closes#510
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, all the ceph package installation resources use
"state=latest", which means subsequent runs of the ceph playbooks
could result in ceph being upgraded if there are package updates
available in the selected repo.
This commit adds a new variable to ceph-common called
'upgrade_ceph_packages' which defaults to False. This variable is used
in the package installation resources for ceph packages to determine if
the resource should use "state=present" or "state=latest". If the
variable gets set to True, "state=latest" will be used.
Additionally, we update rolling_update.yml to override
upgrade_ceph_packages to true to permit package upgrades in this
context specifically.
Closes issue #506
This change allows for configurable Ceph Conf Directory permissions. This
is required for integrators of Ceph, like OpenStack Cinder, which needs to
read from /etc/ceph for operation.
Use command module instead of shell since we do not do anything fancy
here. Remove the duplicate register.
Signed-off-by: Sébastien Han <seb@redhat.com>
As raised in #466 it is important in order to avoid unnecessary
troubleshooting to check that ceph ports are allowed on the platform.
The check runs a nmap command from the host running Ansible
to all the ceph nodes with their respective ports.
Signed-off-by: Sébastien Han <seb@redhat.com>
Thanks to @cloudnull great patch at
https://github.com/ansible/ansible/pull/12555
we now have the ability to add more configuration options instead of
having to push a PR to add a new option to the template. So you can
dynamically add and remove flags.
To use it, edit `ceph_conf_overrides` in `group_vars/all` like so:
```
ceph_conf_overrides
global:
foo: 12345
bar: 6789
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, the fetch directory is created in your working directory
(where ansible is run from). We prefer to not keep any state in this
directory and would prefer to have the fetch directory configurable so
we can store it outside of our code checkout.
This commit creates a new variable in each role called
`fetch_directory` (defaulting to the previous value of 'fetch/'), and
then updates each reference to 'fetch' to use the new variable instead.
Closes issue #383
When multiple monitor hosts attempt to create the fetch directory there
is the potential for the task to fail with:
"OSError: [Errno 17] File exists: 'fetch'"
This appear to be an issue with the file module trying to create the
same directory at the same time when the tasks has been delegated to a
single host.
This commit enables run_once on the affected task which should address
the issue.
Fix back the rolling update playbook.
However every single time the playbook will run it will check for new
packages and install the latest ones. I don't think this is always the
desired behaviour. We need to find a way to conciliate both...
Signed-off-by: Sébastien Han <seb@redhat.com>
Fix the logic for the mandatory devices check so that it applies to
raw_multi_journal and journal_collocation scenarios separately.
This fails otherwise because whichever var is "first" in the or is most
likely undefined.
Cool stuff :). We don't need to specify an initial monitor key anymore.
A key will automatically be generated.
The default key can always be overriden with the `monitor_secret`
variable.
Signed-off-by: leseb <seb@redhat.com>
While re-running the playbook we do not want to check for new packages.
We shouldn't perform upgrades, we leave this to the operators.
Signed-off-by: leseb <seb@redhat.com>
Feel so bad about this one...
Now it's fixed, the rgw section will be activated once the rgws hosts
are part of the inventory.
Signed-off-by: leseb <seb@redhat.com>
Sébastien Han
Andrew Schoen
Logan V
Guillaume Abrioux
Shengjing Zhu
Alfredo Deza
Daniel Marks
Ken Dreyer
James Saint-Rossy
Eduard Egorov
Simon Weald
OrFriedmann
Patrick Donnelly
Daniel Gryniewicz
Daniel Lin
Ivan Font
Martin Bukatovic
Kalle Happonen
Alberto Murillo
Matthew Rees
Tino Schmeier
Andrew Schoen
Sam Yaple
Samuel Matzek
Matt Thompson
Chris St. Pierre
Ben England
runsisi
François Charlier
Zack Cerza
Niklas Haas
Byron McCollum
crcceph
Eike Frost
Huamin Chen
Emilien Mantel
Michael Sambol
Abhishek Varshney
Timo Beckers
git-harry
Andy McCrae
Michael Sambol
Andrew F. Ly