2a52d5b555
Tests: update tests according to ipv6 support
...
Since ceph.conf.j2 has been updated to add ipv6 support, the different
variables in many scenarios need to be updated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-07-04 10:57:27 +02:00
35ad0e1c11
Remove duplicate entry in test Vagrantfile
...
remove some leftover since code has been refactored
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-15 16:42:58 +02:00
a9867e22fb
tests: add PG config to the docker_cluster scenario
...
This is so we'll pass the PG check when performing a rolling update.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-13 08:56:43 -05:00
ddfe019342
Refact code
...
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-05-24 15:55:41 +02:00
7c5bda3d63
tests: pin testinfra to 1.6.0
...
1.6.1 fails with 'testinfra is in an unsupported or invalid wheel'
See: https://github.com/philpep/testinfra/issues/201
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-05-17 15:22:45 -05:00
db19984010
test: check if default bucket object quota is applied
...
Resolves: rhbz#1391500
Signed-off-by: Ali Maredia <amaredia@redhat.com>
2017-05-16 17:12:27 -04:00
734a07f0b9
rgw: test functionality of conf vars and pool creation for tuning
...
Signed-off-by: Ali Maredia <amaredia@redhat.com>
2017-05-05 10:03:53 -04:00
ba5c40d45d
tests: all tests must use the node fixture
...
Otherwise the logic we have for skipping tests does not work.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-05-04 16:37:28 -05:00
949310c19e
tests: do not test mgr nodes on jewel
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-05-04 15:35:04 -05:00
2fada9bd6b
tests: allow for insecure docker registries when testing rhcs
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-05-02 16:21:48 -05:00
10d39e98dd
tests: test that all docker OSDs are up and in
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-05-01 11:40:44 -05:00
06b36fddf9
tests: adds a way to mark docker only tests
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-05-01 10:45:03 -05:00
800b439667
Common: Restore check_socket
...
Restore the check_socket that was removed by `5bec62b`.
This commit also improves the logging in `restart_*_daemon.sh` scripts
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-04-24 12:31:49 +02:00
8ba1624f21
tests: mgr nodes should have the ceph-mon repo install
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-04-21 10:45:33 -07:00
dfd8f4d96e
test: add mgr section to the host inventory file
...
Without this, we don't test the mgr role so we need to add it.
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-04-15 00:16:10 +02:00
0e6d89b9db
tests: print contents of group_vars/all after modification
...
This is just nice to see in the test output so we know exactly what
configuration is going to be used.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-04-12 09:23:21 -05:00
386afbec83
tests: set needed config in group_vars/all for rhcs testing
...
Instead of relying on environment variables and --extra-vars simply
modify the group_vars/all that ships with the specific testing scenario
to enable ceph_rchs testing.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-04-12 07:53:49 -05:00
35aab1274a
tests: enable the rhcs-7-extras-nightly repo on test nodes
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-04-10 13:46:03 -05:00
6145a809ba
tests: change centos/atomic-host box name to rhel7
...
We'd like to test everything rhcs on the same rhel7 box.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-04-10 13:39:16 -05:00
186a392656
Merge pull request #1425 from ceph/bump-kraken
...
common: bump ceph version to kraken
2017-04-10 19:03:39 +02:00
e48c31c671
common: bump ceph version to kraken
...
Kraken has been out for a couple of weeks now and the CI can test both
Kraken and Jewel.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-04-10 18:05:19 +02:00
61a8b26d59
test: add mgr bootstrap support
...
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-04-10 15:13:13 +02:00
2aa5286544
mgr: add new role for ceph-mgr
...
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-04-10 15:13:09 +02:00
c37aaa41f4
playbook: homogenize the way list osd ids
...
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-03-30 11:51:38 +02:00
f2aaaa4970
tests: change ceph/ubuntu-xenial boxes to rhel7
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-23 08:43:11 -05:00
23ab14c105
tests: change hosts in first play in rhcs_setup to localhost
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 19:40:34 -05:00
a4f05e4926
tests: set MTU to 1400 on test node interfaces
...
In the environment we were testing on, MTU was set to 1500 which causes
download failures of our yum repos. There might be a better way to set
this instead of doing it here in ansible.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 16:44:29 -05:00
66f3f31702
tests: adds a task to download a repo file for nightly rhel7 packages
...
This is a url to an actual repo file, not a baseurl to use in a repo.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 16:18:57 -05:00
ead8dcebcf
tests: fix ceph tools baseurl
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 16:02:50 -05:00
408cd61483
tests: enable the downstream rhcs repos
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 15:42:17 -05:00
b0caeed682
tests: fix task in rhcs_setup that changes vagrant box to rhel7
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 12:38:12 -05:00
d261da6679
tests: adds a rhcs_setup.yml playbook
...
This is used to configure the test nodes for testing Ret Had Ceph
Storage.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-03-22 10:13:51 -05:00
a551ad97bb
tests: when using pytest mark decorators ensure all fixtures are defined
...
Decorating a test method directly with a pytest mark seems to break if
the test function does not explicitly define all pytest fixtures it
expects to recieve.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-02-22 13:43:59 -06:00
503ec9be57
ci: decorate the tests to not run on docker scenario
...
Certain scenario won't work on containerized deployment. So we decorate
them so they can be skipped.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-22 10:53:03 -05:00
e22acb81e6
ci: fix issue on ansible2.2-docker_dedicated_journal
...
journal_collocation was enabled so the test suite was testing this
scenario and obviously failed since there is no second partition to
verify.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 16:14:39 -05:00
51b759fc16
ci: do not use atomic host for ansible2.2-docker_dedicated_journal
...
Switch to CentOS since Atomic host does not have the right Docker
version.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 15:56:09 -05:00
55bde0336f
ci: set a different directory for ceph osd docker run script
...
/usr/share is not writable on Atomic Host so we use /var/tmp instead.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 15:56:09 -05:00
e9311bcc74
ci: do not generate random hostname for ansible2.2-docker_dedicated_journal
...
This fixes the error: Call to virDomainCreateWithFlags failed: internal
error: Monitor path
/var/lib/libvirt/qemu/domain-docker-cluster-dedicated-journal_osd0_1487692576_dbfc21d851071d3e2cd2/monitor.sock
too big for destination
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 15:56:09 -05:00
b91d227b99
docker: make ceph docker osd script path
...
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 15:56:09 -05:00
7b216aa8e0
ci: add docker-cluster-dmcrypt-journal-collocation scenario
...
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 15:56:09 -05:00
7aabbc931d
tests: add scenario for dedicated-journal on docker
...
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-21 15:54:36 -05:00
d02f14a329
tests: if no osds are created do not error in conftest.py
...
If no OSDs were created the command would fail and because we were using
check_output it would throw an exception and mark all OSD tests as ERROR.
This keeps tests from running that might tell us why the OSDS were not created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-02-02 12:39:06 -06:00
6e9da95b33
ci: set replica count to 1 since we have a single osd
...
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-01-31 17:39:55 +01:00
20705aa35a
tests/journal_collocation: adds testing values to ceph_conf_overrides
...
This gives test coverage to changes introduced in:
https://github.com/ceph/ceph-ansible/pull/1214
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-01-26 09:39:42 -06:00
a774ea025d
tests/xenial_cluster: adds a client node
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-01-23 09:22:06 -06:00
48a8cd1a43
test: add tests for the client role
...
Here we test the client role.
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-01-20 12:22:18 +01:00
2d8ac4a586
docker: only use systemd to manage containers
...
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
2016-12-16 19:37:05 +01:00
f0687995e1
common: add the name of the ceph conf file in the play
...
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
2016-12-15 15:26:01 +01:00
a8ca0da5ad
test: add cluster name support test scenario
...
We need to test the cluster name support in this CI as well. This
commit might be prone to debate because it tests 2 things in a single
scenario. We first test our ability to deploy a cluster AND the cluster
name support. However it's easier to do it this way and will reduce the
amount of time for testingg. If we don't do this we will have a
duplicate those 2 existing tests into new ones 'only' to test the
cluster name support.
Signed-off-by: Sébastien Han <seb@redhat.com>
2016-12-15 15:26:01 +01:00
6baf2192cd
tests: adds an osds parameter to the node fixture
...
The osds are named differently for systemd in containerized deployments
so this new parameter is used to make that change transparent in the
tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 19:27:42 -06:00
ae18b2db65
tests: mark tests with no_docker that fail on containerized deployments
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 19:19:43 -06:00
239b0d0f96
tests: adds a docker property to the node fixture
...
This is used to skip tests that will not work with containerized
deployment or atomic hosts.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 19:17:09 -06:00
55fee14bd0
tests: adds a docker: true var to the docker_cluster scenario
...
This lets the CI tests know that this scenario is using docker and
should skip certain tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 19:15:29 -06:00
26a0e8a084
tests: account for multiple osd hosts when testing if all are up and in
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 14:31:31 -06:00
f5fb924189
tests: ensure all osds are listening on the cluster network
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 10:36:07 -06:00
a184b9a64f
tests: test that all osds are listening on the public network
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 10:36:07 -06:00
e2ffd66ca8
tests: add num_devices to node fixture
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-07 10:36:06 -06:00
9b959d10ff
tests: adds a comment to the setup.yml playbook for clarification
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:58:07 -06:00
e3521b0830
tests: skip installing net-tools on atomic hosts
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:58:07 -06:00
4323607c2e
tests: dmcrypt_journal_collocation should run journal collocation tests
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:58:07 -06:00
13333d9724
tests: use cluster_name in tests when needed
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:58:07 -06:00
4effce1c31
tests: use node["conf_path"] instead of hardcoding the path in tests
...
This also accounts for the cluster having a custom cluster name
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:58:06 -06:00
4e3eb7b627
tests: add cluster_name and conf_path to the node fixture
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:58:05 -06:00
2464b69612
tests: include the number of mons as a attribute on node
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:57:20 -06:00
1abbc948d9
tests: update skip messages in conftest.py
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
d79188c8b6
tests: rename vars to ansible_vars in conftest.node
...
This is to avoid redefining the builtin vars()
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
5f81638b5e
tests: rename CephNode to node and add a bit of documentation
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
73705933c9
tests: with testinfra we don't need scenario.py files anymore
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
1e79bc6726
tests: tests for collocated journals
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
1b3aca44d7
tests: add a journal_collocation tag to collocated journal tests
...
The test will be skipped if journal_collocation is not True in the
group_vars for the scenario.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
dddfe6d9de
tests: ensure ceph-mon is installed on mons
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:20 -06:00
8ed8dfd907
tests: make sure all osds are mounted
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
0665167afa
tests: adds some basic tests for OSD nodes
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
e13da73a5e
testing: CephNode should return osd_ids
...
This is an empty list on anything but an OSD node. These ids will be
used for further OSD testing.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
0e7133cfd0
tests: remove test files that are not used anymore
...
These tests have been replaced by the ones in test_install.py
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
20f6831f8b
tests: test ceph.conf using testinfra modules
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
4810b38ece
tests: ensure tests marked with 'all' run on every node
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
cd9b47ceb8
tests: the CephNode fixture should provide the cluster subnet
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
a31c86c191
tests: tests mon services to ensure they are running correctly
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:19 -06:00
4d5a3510e4
tests: include a playbook to install net-tools for socket checks
...
This playbook could be used in the future to install anything else we
need on these nodes for testing purposes.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:18 -06:00
05be43c546
tests: return address and ansible vars from CephNode
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:18 -06:00
b5552239e7
tests: port tests/functional/test_install.py to use testinfra fixtures
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:18 -06:00
c02ffdb0e0
tests: change conftest.py to support dynamic markers and test selection
...
This applies correct markers to tests depending on their file path.
Tests that live at the root of tests/functional/tests will be given a
marker of 'all' and apply to any type of ceph node.
Tests that live in tests/functional/tests/mon will get the
'mons' marker and will only run for nodes in the 'mons' group.
Tests that live in tests/functional/tests/osd will get the 'osds'
marker and will only run for nodes in the 'osds' group.
All tests must use the CephNode fixture for this to work and be
parameterized by testinfra.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:18 -06:00
870a4358f0
tests: use testinfra in tox.ini instead of pytest directly
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-06 14:56:18 -06:00
1574e8f4ab
tests: make centos7_cluster use three mons
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 17:27:09 -06:00
155bcf5ae2
tests: rename the directory for centos7_cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 16:59:27 -06:00
234b2c1cc2
tests: removes unused xenial_conf_tests and xenial_mon_osd scenarios
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 16:56:06 -06:00
da6d68c042
tests: rename the directory for xenial_cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 16:49:40 -06:00
5b9cb48774
tests: add 2 more mons to xenial_cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 16:46:05 -06:00
9f887f6064
tests: remove unused group_vars/osds from docker_cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 14:50:21 -06:00
de711f2996
tests: docker_cluster does not need os_tuning_params
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 14:49:31 -06:00
2223713525
tests: docker_cluster should run conf_tests
...
This also makes the conf_tests take the subnet as input
so multiple scenarios on differing subnets can use these tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 12:18:01 -06:00
7abbab820e
tests: use journal_size in ceph_osd_docker_extra_env for docker_cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 10:28:55 -06:00
53a106a884
tests: remove unsued options from docker_cluster vagrant variables
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 10:28:55 -06:00
330d64c541
tests: docker_cluster should use 3 mons
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 10:28:55 -06:00
182f766cc4
tests: update the group_vars for docker_cluster
...
Fixes the monitor_interface and sets osd scenario config
options so the mandatory checks pass.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 10:28:54 -06:00
11c13ad7c0
tests: adds a docker_cluster scenario
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 10:28:54 -06:00
c7ea7f4e1e
tests: change the subnet on dmcrypt-journal-collocation
...
It was currently set conflicting with dmcrypt-journal
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-12-01 10:28:54 -06:00
d0b2b13f4f
tests: specify the devices for OSDs in the scenario for collocation
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: colocated#tests
2016-11-29 10:05:49 -05:00
e7f734a082
tests: create tests for collocated journals
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: colocated#tests
2016-11-29 10:05:16 -05:00
138e5a9421
tests: change centos7-cluster to use raw_multi_journal
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 15:10:07 -06:00
eae3463a9e
tests: change xenial-cluster to use raw_multi_journal
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 15:05:48 -06:00
a05a1b9b0f
testing: change raw-multi-journal to journal-collocation
...
We want to test journal collocation here because we're gonna switch
xenial-cluster and centos7-cluster to use a dedicated journal.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 15:04:04 -06:00
9a1863dd11
tests: make Vagrantfile a symlink for dmcrypt scenarios
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 12:06:25 -06:00
c212162afb
tests: adds a scenario using OSD dmcrypt_journal_collocation
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 12:03:00 -06:00
9f432bfb05
tests: adds a dmcrypt-dedicated-journal testing scenario
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 12:02:32 -06:00
e3d45095d3
tests: rename the centos7-mon-osd scenario to raw-multi-journal
...
We really only need to test the raw-multi-journal OSD scenario on one
OS and it needed a better name to use with the CI.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-28 10:28:17 -06:00
0535b328a2
tests: update the subnet in the ceph.conf tests
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-18 14:15:34 -06:00
901f4cdfd2
tests: fix monitor_address in ubuntu/16.04/mon/hosts
...
We changed the subnet in vagrant_variables.yml so this needs to change
here as well.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-18 13:27:02 -06:00
016a6624a7
testing: use the same sequence in the group_vars for every test scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-18 13:20:59 -06:00
b2af99f31b
testing: use a sequence in the subnets for every vagrant_variables.yml to avoid collisions
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-18 13:20:59 -06:00
0a6bb6e06c
Merge pull request #1092 from ceph/ceph-boxes
...
Use new ceph vagrant boxes
2016-11-16 09:42:31 -06:00
0c11a2ff57
tests: remove all validating yml playbooks
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-16 08:50:03 -05:00
ecb5d5b35d
testing: disable vagrant sync folder add on xenial mon osd scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:25 -05:00
9419c4cc97
testing: disable vagrant sync folder add on xenial mon osd mds rgw scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:24 -05:00
3c990d15c3
testing: disable vagrant sync folder add on centos 7 mon osd mds rgw scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:22 -05:00
193d61f90a
testing: disable vagrant sync folder add on centos 7 mon osd scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:20 -05:00
ad3452a2a8
testing: use ceph vagrant box on ubuntu xenial mon osd scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:16 -05:00
f7eaf53a9c
testing: use ceph vagrant box on ubuntu xenial mon osd mds rgw scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:13 -05:00
46bb2a803a
testing: add comment for ceph vagrant boxes on centos 7 mon osd scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:09 -05:00
ef948dbc02
testing: add comment for ceph vagrant boxes on centos 7 mon osd mds rgw scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:07 -05:00
5df60b5907
tests: disable sync folder when testing
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-11-15 07:53:02 -05:00
ca68d7ce17
tests: make the centos7-mon-osd scenario use raw_multi_journal
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
2016-11-10 12:05:23 -06:00
588aa8d8f3
tests: adds a scenario for a centos7 1mon 1osd 1mds 1rgw cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
2016-11-10 12:05:23 -06:00
38ee310f8c
tests: adds a scenario to test a xenial 1mon 1osd 1mds 1rgw cluster
...
This scenario duplicates what we are currently doing with our
ceph-ansible testing using OVH and a single node, except now
we are using 4 separate nodes.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
2016-11-10 12:05:23 -06:00
3b75d44ed6
tests: make xenial-mon-osd use raw_multi_journal instead of collocation
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
2016-11-10 12:05:23 -06:00
0522d32e7e
tests: change the centos box to centos/7
...
This box supports both libvirt and virtualbox. Eventually we want to
be building our own boxes but this should work in the short term.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-08 16:49:26 -06:00
95bce703f1
tests: change the xenial box to yk0/ubuntu-xenial
...
This box supports both virtualbox and libvirt. Eventually
we want to be building our own vagrant boxes, but this might
work for now.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
2016-11-08 15:48:16 -06:00
df59ec6fae
tests: adds the vagrant_variables.yml that were previously ignored
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
2016-11-08 12:37:05 -06:00
44503487c5
tests: adds a 1mon 1osd centos7 test scenario
...
This uses journal collocation for the osd.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
2016-11-08 12:37:04 -06:00
4dd51ee3c6
tests: adds a 1mon 1osd xenial test scenario
...
This sets up the osd using journal collocation
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
2016-11-08 10:35:43 -06:00
a96d51fdfa
tests: ceph.conf tests for the xenial 3 mon cluster
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
2016-11-08 10:35:43 -06:00
dba8694794
tests: adds a xenial 3 mon test scenario
...
This can be used to test if mon hosts and
mon initial members are being set properly with
multiple hosts.
Also, to verify that monitor_address and monitor_interface
options both work as described.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
2016-11-08 10:35:43 -06:00
f62d15bf20
tests: ignore folders created by ceph-ansible during testing
...
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-08 10:35:43 -06:00
d213080d19
tests: remove the initial_members scenario
...
This was just a placeholder until we could get more valid scenarios in
place.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
2016-11-08 10:35:43 -06:00
d5a7f3de8f
tests: require a group_vars folder in the scenario dir
...
This will allow for no changes needed in the ansible playbook command
when adding new scenarios. Each scenario will just need a hosts file and
a group_vars directory to define how the cluster should be setup.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-11-04 16:35:45 -05:00
3511e12253
tests: add a hosts file for the initial_members scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 14:47:59 -04:00
74f9f2bff9
tests: add a helper script to generate vagrant ssh configs
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 14:13:30 -04:00
8cda2db9c3
tests: mon_initial_members should look for the right hostname
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 14:13:30 -04:00
08e7103766
tests: fix helper to use the actual lines form ceph.conf
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:34 -04:00
1caacfd02b
tests: use a different vagrant box
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
0b044c89f3
tests: include the vagrant_variables.yml file specific to this scenario
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
77281609f8
tests: create a README with some explanation on how to use the test harness
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
69632b3ed2
tests: define a requirements.txt file
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
ab805824ea
tests: create an example scenario file
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
05dace442d
tests: create the conftest file that does all the magic
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
4b93837e4d
tests: add the symlinked Vagrantfile to initial_members
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
f828b3d3fc
create a scenario config file for mon initial members
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
cdac170cbf
tests: add __init__.py for functional tests
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:33 -04:00
757356d57e
tests: common basic tests for after installation
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:32 -04:00
fe7bfbb62f
tests: add __init__.py for mon tests
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:32 -04:00
d73843c36c
tests: create a test to check for mon_initial_members
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:32 -04:00
d8b380c536
tests: placeholder pytest.ini to define test root dir
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: pytest#harness
2016-11-04 13:59:32 -04:00
8a09b9c6ab
add a mdss group to the CLI testing inventory
...
The ceph-mds role is being tested, but there was not group for it in the
inventory so ceph-mds was not being installed on the testing machine.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2016-05-06 14:47:45 -05:00
f16194b82b
create a single-machine inventory for testing
...
Signed-off-by: Alfredo Deza <adeza@redhat.com>
2016-01-28 11:53:23 -06:00
188c32323b
WIP: first implementation of functional tests
...
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2015-02-22 02:31:28 +01:00
9336d80cd6
Fix Travis
...
Only do syntax check now.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2015-01-21 16:33:26 +01:00
c34d16f08f
Revert "Fix Travis run"
2015-01-21 16:17:40 +01:00
965df5579c
Fix Travis run
...
Fix travis run and effectively test the playbooks.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2015-01-21 16:15:55 +01:00
2c1d98f07d
Add test to the playbooks
...
Through Travis.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2015-01-21 09:59:42 +01:00
Guillaume Abrioux
Andrew Schoen
Ali Maredia
Sébastien Han
Alfredo Deza
Andrew Schoen
Sébastien Han