In our use case we might only be configuring mons and not osds in the
same call, so we don't want to check variables needed for osds when they
are not needed to configure a mon.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
as stated in https://github.com/ansible/ansible/issues/4297
if we register a variable twice and even if a task is skipped the
register will not get overwritten... So we use the fact variant as
mentionned in the ansible issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
While this is not widly used (AFAIK :p) the feature was broken. Thanks
to @zmc for reporting it. You can now set `osd_auto_discovery` to
true in your group_vars/osd and it will go through all the devices
available and will make them OSDs.
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently deploying a MON fails with "bad symbolic permission for mode"
errors due to the file/directory modes not being interpreted as octal
values. This commit updates roles/ceph-common/tasks/main.yml to set
the file/directory modes to strings so they can be interpreted
correctly.
Closes issue #525
run containerized daemons in virtual machines.
to enable it simply do:
`cp site-docker.yml.sample site-docker.yml`
and set `docker: true` in `vagrant_variables.yml`
Signed-off-by: Sébastien Han <seb@redhat.com>
At the moment, all the tasks using the file module are duplicated to have differents ownerships depending on the fact `is_ceph_infernalis`.
The goal of this commit is to have a new logic for this:
- First set facts depending on the `is_ceph_infernalis` fact
- Create the files or directories using the setted facts as ownerships.
We have a requirement to install the packages first without
configuration. These tags should allow us to target the tasks need to do
that.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
as reported in #510 some systems don't have uuidgen installed so we
better use a more global way to generate it. It sounds like python
should be available in case uuidgen is not.
Otherwise we will have to find another way :)
closes#510
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, all the ceph package installation resources use
"state=latest", which means subsequent runs of the ceph playbooks
could result in ceph being upgraded if there are package updates
available in the selected repo.
This commit adds a new variable to ceph-common called
'upgrade_ceph_packages' which defaults to False. This variable is used
in the package installation resources for ceph packages to determine if
the resource should use "state=present" or "state=latest". If the
variable gets set to True, "state=latest" will be used.
Additionally, we update rolling_update.yml to override
upgrade_ceph_packages to true to permit package upgrades in this
context specifically.
Closes issue #506
It seems that in ansible 2.0 even if a task is skipped by it's `when`
clause not evaluating to true the variables in the play are still
rendered. Because these were not defined in defaults/main.yml ansible
was failing in installs/install_on_redhat where those variables are
being used in a `with_items` stanza.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This change allows for configurable Ceph Conf Directory permissions. This
is required for integrators of Ceph, like OpenStack Cinder, which needs to
read from /etc/ceph for operation.
Use command module instead of shell since we do not do anything fancy
here. Remove the duplicate register.
Signed-off-by: Sébastien Han <seb@redhat.com>
As raised in #466 it is important in order to avoid unnecessary
troubleshooting to check that ceph ports are allowed on the platform.
The check runs a nmap command from the host running Ansible
to all the ceph nodes with their respective ports.
Signed-off-by: Sébastien Han <seb@redhat.com>
Thanks to @cloudnull great patch at
https://github.com/ansible/ansible/pull/12555
we now have the ability to add more configuration options instead of
having to push a PR to add a new option to the template. So you can
dynamically add and remove flags.
To use it, edit `ceph_conf_overrides` in `group_vars/all` like so:
```
ceph_conf_overrides
global:
foo: 12345
bar: 6789
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Because of some permission issue, likely due to the recent ceph user, if
80 is used for civetweb we get:
set_ports_option: cannot bind to 80: 13 (Permission denied)
Changing the port to 8080 until this gets solved.
Signed-off-by: Sébastien Han <seb@redhat.com>
I changed the argument used for starting the mds server. (pre
infernalis)
```
service ceph start mds
```
errors, while
```
service ceph start mds.$hostname
```
correctly starts the service.
I changed the mds directory ownership from ceph:cephh to root:root
again, for pre-infernalis.
And finally, add the ceph_stable_releases checks for the upstart
activation task `for or after infernalis release'.
I have seen a number of failures on this task due to mismatch of
checksum of source file and destination. I suspect this is due to a
race condition caused by several hosts simultaneously copying the same
file to single location on the deployment server.
This change simply updates the 'copy keys to the ansible server' task
by adding 'run_once', which limits the task to being run on a single
MON host.
Closes issue #410
Verify that partitions (for both osd disks and journal disks) are sane
before attempting to prepare the device. Fail if parted fails for
whatever reason.
Closes: #437
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we renamed the variables and removed the old 'docker' variable we
can now collocate container daemons with standard bare metal deployment.
For instance, monitors can be containerized but osds can be deployed
traditionally.
Signed-off-by: Sébastien Han <seb@redhat.com>
It should be used to disable health warnings about number of PGs
being too low if some pools have very few objects bringing down
the average number of objects per pool. This happens when running RadosGW.
The default is 10 and since the warnings only occur with some use cases,
the default here is 10 as well. Set to 20 or more to silence the warnings.
Currently, the fetch directory is created in your working directory
(where ansible is run from). We prefer to not keep any state in this
directory and would prefer to have the fetch directory configurable so
we can store it outside of our code checkout.
This commit creates a new variable in each role called
`fetch_directory` (defaulting to the previous value of 'fetch/'), and
then updates each reference to 'fetch' to use the new variable instead.
Closes issue #383
When multiple monitor hosts attempt to create the fetch directory there
is the potential for the task to fail with:
"OSError: [Errno 17] File exists: 'fetch'"
This appear to be an issue with the file module trying to create the
same directory at the same time when the tasks has been delegated to a
single host.
This commit enables run_once on the affected task which should address
the issue.
This is a rare case but it happens. Since we're just calling
`monitor_interface` and not `hostvars[host]['monitor_interface'],
an error may occur when the current host's interface does not
exist on the other hosts. (eg. eth0 exists for node0, but it does
not exist on node1 and node2)
Fix for this is to use hostvars[host]['monitor_interface']
I'm removing the ceph paritition check from `activate osd(s) when device
is a disk` because the ceph parition does not exist when parted was
registered (on a fresh install). This was causing the activate step to
be skipped.
Currently the OpenStack pools that get created use the default pg_num.
This commit updates the ceph-mon role to allow the pg_num for each pool
to be customised.
Fix back the rolling update playbook.
However every single time the playbook will run it will check for new
packages and install the latest ones. I don't think this is always the
desired behaviour. We need to find a way to conciliate both...
Signed-off-by: Sébastien Han <seb@redhat.com>
Fix the logic for the mandatory devices check so that it applies to
raw_multi_journal and journal_collocation scenarios separately.
This fails otherwise because whichever var is "first" in the or is most
likely undefined.
This will likely one day or another break something. If ceph-disk
complains about a disk just use the purge-cluster.yml playbook first as
it will wipe all the devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
Andrew Schoen
Leseb
Alfredo Deza
Niklas Haas
Ben England
Matt Thompson
Guillaume Abrioux
mcsage
Byron McCollum
Huamin Chen
Logan V
crcceph
Abhishek Varshney
Eric Cook
Bjoern Teipel
Eike Frost
K.C. Wong
Sébastien Han
Michael Sambol
Bill Sanders
Emilien Mantel
Marc Heckmann
Timo Beckers
dexter
git-harry
Abhishek Varshney
Andy McCrae