ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When no monitor group is present in the inventory, this task fails.
This affects only non-containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
The "run 'ceph-volume lvm batch --report' to see how many osds are to be
created" and "run 'ceph-volume lvm list' to see how many osds have already been
created" statements only register the lvm_batch_report and lvm_list variables.
Running those ceph-volume commands should never produce a change on the system.
Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to create the directories on non-containers, they are
created by the packages.
Closes: https://github.com/ceph/ceph-ansible/issues/3430
Signed-off-by: Sébastien Han <seb@redhat.com>
The role contains all the handlers for Ceph services. We decided to
leave ceph-defaults role with variables and a few facts only. This is
useful when organizing the site.yml files and also adding the known
variables to infrastructure-playbooks.
Signed-off-by: Sébastien Han <seb@redhat.com>
For now our best guess is to count the number of devices and multiply
by osds_per_device. Ideally we'd like to run ceph-volume lvm batch
--report and get the number of OSDs that way, but currently we need
a ceph.conf in place already before we can do that. There is a tracker
ticket that would allow os to get around the need for a ceph.conf:
http://tracker.ceph.com/issues/36088
Fixes: https://github.com/ceph/ceph-ansible/issues/3135
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This avoids errors when the osd scenario choosen does not require
setting devices or lvm_volumes. The default values for these are not
set because they exist in the ceph-osd role, not ceph-defaults.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the approach to creating a ceph.conf file has changed, and now
no-longer relies on assembling config file fragments in /etc/ceph/ceph.d
we can avoid the conf_overrides rendering on the local host and skip out
the tasks related to that, instead using just the config_template task
to configure the file directly.
This was causing a lot of pain with the handlers. Also the
implementation was not ideal since we were assembling files. Everything
can now be done with the ceph_crush module so let's remove that.
Signed-off-by: Sébastien Han <seb@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This allows us to use host-specific variables in ceph_conf_overrides variable. For example, this fixes usage of such variables (e.g. 'nss db path' having {{ ansible_hostname }} inside) in ceph_conf_overrides for rados gateway configuration (see profiles/rgw-keystone-v3) - issue #2157.
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
In Jewel, we don't use bootstrap-rbd keyring for rbd-mirror nodes, it
results with a socket path/name different according to which ceph
release you are deploying.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
The installation process is now described as follow:
* you still have to choose a 'ceph_origin' installation method. The
origin can be a 'repository' (add a new repository), distro (it will use
the packages provided by the native repo source of your distribution),
local (only available on redhat system, it installs locally built
packages). This option is not well tested, so use it carefully
* if ceph_origin == 'repository' you will have to decide what kind of
repository you want to enable:
- community: corresponds to the stable upstream/community version
- enterprise: corresponds to the stable enterprise/downstream version
(basically you are a red hat customer)
- dev: it will install ceph from packages built out of the github
development branches
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There should be no need to use sudo when writing or using these files.
It creates an issue when the user running ansible-playbook does not
have sudo privs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This will give us more flexibility and the possibility to deploy a client node
for an external ceph-cluster.
related BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1469426Fixes: #1670
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Artur Fijalkowski
Kevin Coakley
L3D
Rishabh Dave
Andrew Schoen
John Fulton
Sébastien Han
Neha Ojha
Ha Phan
Andy McCrae
Eduard Egorov
Major Hayden