In Luminous, ceph-disk defaults to bluestore so all our scenarios are
using bluestore, we need to force testing both.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Fail with a sane message if the devices or raw_journal_devices variables
are strings instead of lists during manual device assignment.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
This commits refactors how we deploy bluestore. We have existing
scenarios that we don't want to change too much. This commits eases the
user experience by now changing the way you use scenarios. Bluestore is
just a different interface to store objects but the scenarios more or
less remain the same.
If you set osd_objectstore == 'bluestore' along with
journal_collocation: true, you will get an OSD running bluestore with DB
and WAL partitions on the same device.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true, you will get an OSD running bluestore with a
dedicated drive for the rocksdb DB, then the remaining
drives (used with 'devices') will have WAL and DATA collocated.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true and declare bluestore_wal_devices you will get
an OSD running bluestore with a dedicated drive for rocksdb db, a
dedicated drive partition for rocksdb WAL and a dedicated drive for
DATA.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need for 2 variables to enable bluestore, prior to this
patch one had to do the following to activate bluestore:
osd_objectstore: bluestore
bluestore: true
Now you just need to set `osd_objectstore: bluestore`.
Fixes: https://github.com/ceph/ceph-ansible/issues/1475
Signed-off-by: Sébastien Han <seb@redhat.com>
Followup on https://github.com/ceph/ceph-ansible/pull/1469 where we
merged most of the container code from roles/ceph-*/task/docker/*.yml
into roles/ceph-docker-common/tasks/
It seems that we forgot to remove the original files.
Signed-off-by: Sébastien Han <seb@redhat.com>
since `-e CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE` is already hardcoded in
`eph-osd-run.sh.j2` there is no need to add `-e
CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE` as a default value in defaults vars.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to `196fa7e` this commit check if a container has been
already launched and delete it before retrying the ceph osd prepare
process.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Proof-of-concept clusters or actual production clusters will never want to use this. We also do not test it anywhere for this same reason.
Signed-off-by: Gregory Meno <gmeno@redhat.com>
Ansible's assemble module by default will put all files in the src
directory together into dest. We only want to put {{ cluster }}.conf
and osd.conf together, not anything that might have found its way into
/etc/ceph/ceph.d (e.g. files left by the sysadmin taking backups
before an ansible run). So specify a regexp that matches only those
two files.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
As reported in
https://github.com/ceph/ceph-ansible/issues/1403 when devices are held
by lvm and `osd_auto_discovery` is set to true, it's not enough to check
for a partition count = 0 since Ansible does not report.
This patch also looks for 'holders' which in a case of lvm corresponds
to the name of the pv. Now we also look for holders = 0.
Fixes: #1403
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
With ' in osd_crush_location, systemd will show this error:
ceph-osd-prestart.sh[2931]: Invalid command: invalid chars ' in 'root=
Signed-off-by: Christian Zunker <christian.zunker@codecentric.de>
Install package from official repos rather than pip when using RHEL.
This commit fix https://bugzilla.redhat.com/show_bug.cgi?id=1420855
Also this commit Refact all `roles/ceph-*/tasks/docker/pre_requisite.yml`
to avoid a lot of duplicated code.
Fix: #1303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Oh yeah! This patch adds more fine grained control on how we run the
activation osd container. We now use --device to give a read, write and
mknodaccess to a specific device to be consumed by Ceph. We also use
SYS_ADMIN cap to allow mount operations, ceph-disk needs to temporary
mount the osd data directory during the activation sequence.
This patch also enables the support of dedicated journal devices when
deploying ceph-docker with ceph-ansible.
Depends on https://github.com/ceph/ceph-docker/pull/478
Signed-off-by: Sébastien Han <seb@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we now only support systemd has an init system we can finally
treat containers as processes using systemd and this for all the
distros.
Signed-off-by: Sébastien Han <seb@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Sometimes users for testing, tend to delete the whole /var/lib/ceph and
then run ansible again, OSD will never come up if we do not create their
directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
yanyx
Guillaume Abrioux
Douglas Fuller
Sébastien Han
Austin Workman
Andrew Schoen
Pascal Watteel
David Galloway
Andrew Schoen
Alberto Murillo
Gregory Meno
John McEleney
Matthew Vernon
Daniel Horak
Christian Zunker
Tobias Florek