When using monitor_address_block to determine the ip address of the
monitor node, we need an ip address available in that cidr to be
present in the ansible facts (ansible_all_ipv[46]_addresses).
Currently we don't check if there's an ip address available during
the ceph-validate role.
As a result, the ceph-config role fails due to an empty list during
ceph.conf template creation but the error isn't explicit.
TASK [ceph-config : generate ceph.conf configuration file] *****
fatal: [0]: FAILED! => {"msg": "No first item, sequence was empty."}
With this patch we will fail before the ceph deployment with an
explicit failure message.
Resolves: rhbz#1673687
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using community repository we need to set the priority on the
ceph repositories because we could have some conflict with EPEL
packages.
In order to set the priority on the ceph repositories, we need to
install the yum-plugin-priorities package.
http://docs.ceph.com/docs/master/install/get-packages/#rpm-packages
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This creates a confusion whether directory/file names are being
formed by appendng strings or path components are being appended.
Since latter should never be done manually, get rid of the statements
creating confusion.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
os.path.join adds the separator (i.e. '/') between the provided path
components only if needed. Providing a single path component doesn't
lead to any checks.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
the task will be delegated to mons[0] for all mgr hosts, so we can just run it on the first host and have the same effect.
Signed-off-by: wumingqiao <wumingqiao@beyondcent.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
I suspect `./generate_group_vars_sample.sh` wasn't used in
b8d580b3f4 because it introduced a typo in
`group_vars/all.yml.sample` and `group_vars/clients.yml.sample`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using subscription-manager with command module we can use
the rhsm_repository ansible module.
This module already uses repos list feature to determine if a
repository is enabled or not. That way this module is idempotent so
we don't need changed_when: false anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because the client name is part of the client key path we can reuse
the user variable to build this path.
Also remove a duplicate user variable declaration.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because we're still using Linux distributions with python 2.7 (like
CentOS/RHEL 7) it could be useful to run travis tests against python
2.7 even if the support will be ended in 2020.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph stable community repository only enables the basearch
packages url.
Adding the noarch url because starting with nautilus release, some
packages are added there and useful for mgr or grafana.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After b8d580b and e9e5d5a we could have either item.min_size or
osd_pool_default_min_size using string instead of int causing the
condition to be true when it's false.
As a result, the task could try to set the pool min_size value to
0 which leads to:
Error EINVAL: pool min_size must be between 1 and 1
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b8d580b3f4 introduced a bug when
`min_size` isn't set (default to 0).
Typical error:
```
Error EINVAL: pool min_size must be between 1 and 1
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The following lint issues have been resolved:
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:2
[305] Use shell only when shell functionality is required
/home/travis/build/ceph/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:47
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:2
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:7
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:14
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:19
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:24
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
otherwise a bunch of jobs will fail like following:
```
[WARNING]: Unable to parse /home/jenkins-build/build/workspace/ceph-ansible-nightly-luminous-ubuntu-container-stable-3.2-bluestore_lvm_osds/tests/functional/bs-lvm-osds/container/hosts-ubuntu as an inventory source
[WARNING]: No inventory was parsed, only implicit localhost is available
[WARNING]: provided hosts list is empty, only localhost is available. Note that the implicit localhost does not match 'all'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of testinfra 2.0.0, the binary name is `py.test`.
But let's pin the version to 1.19.0.
Indeed, migrating to 2.0.0 requires our current testing to be reworked a bit.
Since we don't have the bandwidth ATM for this, it's better to simply
keep testing with testinfra 1.19.0.
Note that I've replaced all `testinfra` occurences by `py.test` anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
otherwise, it will end up with error like following:
```
FAILED! => {"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute 'ansible_hostname'"}
```
because facts won't have been gathered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1670663
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
as of b70d54ac80 the service launched isn't
ceph-rbd-mirror@admin.service.
it's now `ceph-rbd-mirror@rbd-mirror.{{ ansible_hostname }}`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
removing the content of this directory seems a bit agressive and cause a
redeployment to fail after a purge on debian based distrubition.
Typical error:
```
fatal: [mon0]: FAILED! => changed=false
attempts: 3
msg: No package matching 'ceph' is available
```
The following task will consider the cache is still valid, so apt
doesn't refresh it:
```
- name: update apt cache if cache_valid_time has expired
apt:
update_cache: yes
cache_valid_time: 3600
register: result
until: result is succeeded
```
since the task installing ceph packages has a `update_cache: no` it
fails:
```
- name: install ceph for debian
apt:
name: "{{ debian_ceph_pkgs | unique }}"
update_cache: no
state: "{{ (upgrade_ceph_packages|bool) | ternary('latest','present') }}"
default_release: "{{ ceph_stable_release_uca | default('') }}{{ ansible_distribution_release ~ '-backports' if ceph_origin == 'distro' and ceph_use_distro_backports else '' }}"
register: result
until: result is succeeded
```
/tmp/* isn't specific to ceph as well, so we shouldn't remove everything
in this directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
using `shell` module seems to be the only way to make this task working
on rhel based distribution AND debian based distributions.
on ubuntu, using `command` ansible module fails like following
(not due to `sudo` usage or not):
```
ok: [osd1] => changed=false
cmd: command -v ceph-volume
failed_when_result: false
msg: '[Errno 2] No such file or directory: ''command'': ''command'''
rc: 2
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1653307
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Tuned name of a task and error message to make it more user understandable
Fixes BZ 1648168 - ceph-validate : devices are not validated in non-collocated and lvm_batch scenario
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1648168
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
The "get osd ids" statement only registers the osd_ids_non_container variable. Running "ls /var/lib/ceph/osd/ | sed 's/.*-//'" should never produce a change on the system. Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
this is needed to properly handle semaphore synchronization for udev
actions via dmcrypt/cryptsetup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683770
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Referring to BZ#1683290, as dsavineau suggests, being this
bug tripleO specific, removed the ubuntu section and removed
useless mountpoints.
Signed-off-by: fpantano <fpantano@redhat.com>
There's no need to set the client_admin_ceph_authtool_cap variable
via a set_fact task.
Instead we can set this in the role defaults.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The administrator keyring needs full capabilities on mds like mon,
osd and mgr.
Whithout this, the client.admin key won't be able to run commands
against mds (like ceph tell mds.0 session ls)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1672878
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Set directories to 755 and files to 644 to /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} recursively instead of setting files and directories to 755 recursively. The ceph mon process writes files to this path with permissions 644. This update stops ansible from updating the permissions in /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} every time ceph mon writes a file and increases idempotency.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Let's bootstrap mgrs on monitors only if there's no mgrs section in
inventory hostfile.
Closes: #3613
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Rishabh Dave
wumingqiao
Radu Toader
Kevin Coakley
VasishtaShastry
ToprHarley
Noah Watkins
fpantano