This is particularly useful in CI environments where you dont have
the option of adding extra devices or volumes to the host. It is also
a simple change to support loopback devices
In case where docker CLI is available but docker is not running, we
don't want to trigger the restart of the daemons.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since some daemons now install their own packages the task checking the
ceph version fails on Debian systems. So the 'ceph-common' package must
be installed on all the machines.
Signed-off-by: Sébastien Han <seb@redhat.com>
This task was originally needed to fix a docker installation issue
(see: #1030). This has been fixed, therefore it can be removed.
Fixes: #2199
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
A recent change [1] required that the openstack_keys
param always containe an acls list. However, it's
possible it might not contain that list. Thus, this
param sets a default for that list to be empty if it
is not in the structure as defined by the user.
[1] d65cbaa539
We were activating dmcrypt devices with the wrong command. Basically the
first task execute the wrong activate command. The task fails but
continues because of the 'failed_when: false'. Then the right activation
sequence is being done by the next task.
Signed-off-by: Sébastien Han <seb@redhat.com>
when `ceph-rbd-mirror.target` is not enabled, the service won't start
after a reboot because there is a dependency between these two units.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If ceph-ansible deploys a Ceph cluster with "openstack_config: true"
and sets the openstack_keys map to have certain ACLs or permissions,
the requested ACLs or permissions are only set on one of the monitor
nodes [2] when they should be set on all of them.
This patch solves [3] the above issue by having the chmod and setfacl
tasks iterate the list of mon nodes (including the mon node that the
task was delegated to) to apply the chmod of setfacl to the keys in
openstack_keys.
[1]
```
openstack_keys:
- { name: client.openstack, key: "$(ceph-authtool --gen-print-key)", mon_cap: "allow r", osd_cap: "allow class-read object_prefix rbd_children, allow rwx pool=images, allow rwx pool=vms, allow rwx pool=volumes, allow rwx pool=backups", mode: "0600", acls: ["u:nova:r--", "u:cinder:r--", "u:glance:r--", "u:gnocchi:r--"] }
```
[2]
```
$ ansible mons -m shell -b -a "ls -l /etc/ceph/ceph.client.openstack.keyring ; getfacl /etc/ceph/ceph.client.openstack.keyring"
192.168.1.26 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.29 | SUCCESS | rc=0 >>
-rw-r--r--. 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
group::r--
other::r--getfacl: Removing leading '/' from absolute path names
192.168.1.23 | SUCCESS | rc=0 >>
-rw-r--r--. 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
group::r--
other::r--getfacl: Removing leading '/' from absolute path names
$
```
[3]
```
(undercloud) [stack@hci-director ceph-ansible]$ ansible mons -m shell -b -a "ls -l /etc/ceph/ceph.client.openstack.keyring ; getfacl /etc/ceph/ceph.client.openstack.keyring"
192.168.1.25 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.29 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.27 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
(undercloud) [stack@hci-director ceph-ansible]$
```
Add support for the openSUSE distributions. The required packages
are available either in the distribution repositories or in the
OBS one.
Signed-off-by: Markos Chandras <mchandras@suse.de>
When we consume the distribution packages, we don't have the choise on
which version to install, so we shouldn't require that variable to be
set. Distributions normally provide only one version of Ceph in the
official repositories so we get whatever they provide.
Signed-off-by: Markos Chandras <mchandras@suse.de>
openSUSE Leap 42.3 provides support for Ceph Luminous in both the
distribution package and the latest available version in the OBS
repository so add these as the only available installation methods for
openSUSE.
Signed-off-by: Markos Chandras <mchandras@suse.de>
Like 80d32dec, the path to the fact is not correct.
In any case, we will retrieve the IP address in hostvars, the variable
is the way we get the interface name according where it has been set
(eg.: inventory host file vs. group_vars/)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is no need to have a condition on this task, this test should be
always run since the result will be interpreted later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will prevent ceph-ansible from using a loop device while it
shouldn't in auto_discovery mode.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The path to the fact is not correct.
In any case, we will retrieve the IP address in hostvars, the variable
is the way we get the interface name according where it has been set
(eg.: inventory host file vs. group_vars/)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use `devices` variable instead of `ansible_devices`, otherwise it means
we are not using the devices which have been 'auto discovered'
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current code will also return lvm devices such as /dev/dm-2, this
kind of device type is not supported by ceph-disk at the moment. Now we
just ignore them.
Signed-off-by: Sébastien Han <seb@redhat.com>
- One can not run scripts directly in place, that mounted with `noexec`
option. But one can run scripts as arguments for `bash/sh`.
Signed-off-by: Arano-kai <captcha.is.evil@gmail.com>
During the initial implementation of this 'old' thing we were falling
into this issue without noticing
https://github.com/moby/moby/issues/30341 and where blindly using --rm,
now this is fixed the prepare container disappears and thus activation
fail.
I'm fixing this for old jewel images.
Also this fixes the machine reboot case where the docker logs are
purgend. In the old scenario, we now store the log locally in the same
directory as the ceph-osd-run.sh script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Setting monitor_interface in group_vars/all.yml makes the
hostvars[host]['monitor_interface'] non-existing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1507922
Signed-off-by: Sébastien Han <seb@redhat.com>
Only chmod or setfacl the requested keyring(s) in the
opentack_keys data structure when the mode or acls keys
of that data structure exist.
User may specify four permission combinations for the
keyring file(s): 1. only set ACL, 2. only set mode,
3. set neither mode nor ACL, 4. set mode and then ACL.
Fixes: #2092
Use "ceph_tcmalloc_max_total_thread_cache" to set the
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES value inside /etc/default/ceph for
Debian installs, or /etc/sysconfig/ceph for Red Hat/CentOS installs.
By default this is set to 0, so the default package value will be used,
if specified this value will be changed to match the variable, and ceph
osd services will be restarted.
There was a huge resync from luminous to jewel in ceph-docker:
https://github.com/ceph/ceph-docker/pull/797
This change brought a new handy function to discover partitions tight to
an OSD. This function doesn't exist in the old image so the
ceph-osd-run.sh script breaks when trying to deploy Jewel OSD with that
old Jewel image version.
Signed-off-by: Sébastien Han <seb@redhat.com>
stable-3.0 brought numerous changes in ceph-ansible variables, this PR
aims to maintain backward compatibility for someone running stable-2.2
upgrading to stable-3.0 but keeps its groups_vars untouched.
We will then determine the right options to make sure the upgrade works
but we are expecting that new variables should be used.
We will drop this in a near future, maybe 3.1 or 3.2.
Signed-off-by: Sébastien Han <seb@redhat.com>
This feature isn't available before luminous, therefore, we need to play
them only on luminous and after otherwise the playbook will fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3f3d4b9c727d06154c422d445fc2a245aceaed89)
3a58757 introduced an issue for Jewel deployments, since this role is
skipped, `enabled_ceph_mgr_modules.stdout` doesn't exist, therefore, it
ends up with an attribute error.
Uses `.get()` to retrieve `stdout` with a default value so it won't fail
if this attribute doesn't exist (jewel).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In Jewel, we don't use bootstrap-rbd keyring for rbd-mirror nodes, it
results with a socket path/name different according to which ceph
release you are deploying.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit add new osd scenarios, it aims to simplify the CI setup and
brings a better coverage on the OSD scenarios.
We decided to differentiate between filestore and bluestore, thinking
ahead when filestore won't be supported anymore.
So we now have two classes of tests:
* Filestore
* Bluestore
In each of those classes we have container and non-container.
Then for each we test the following:
* collocated
* collocated dmcrypt
* non-collocated
* non-collocated dmcrypt
* auto discovery collocated
* auto discovery collocated dmcrypt
This gives us a nice coverage and also reduces the footprint on the CI.
We are now up to 4 scenarios, each containing 6 OSD VMs.
Signed-off-by: Sébastien Han <seb@redhat.com>
When doing collocation the condition "inventory_hostname in play_hosts"
is breaking the restart workflow.
Signed-off-by: Sébastien Han <seb@redhat.com>
John Fulton
Guillaume Abrioux
Sébastien Han
wintamute
Caleb Boylan
Jan Provaznik
Yixing Yan
Andrew Schoen
Markos Chandras
yaoning
Arano-kai
Alfredo Deza
Joe Talerico
Major Hayden
Andy McCrae