Since all files in container image have moved to `/opt/ceph-container`
this check must look for new AND the old path so it's backward
compatible. Otherwise it could end up by templating an inconsistent
`ceph-osd-run.sh`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 987bdac963)
When using monitor_address_block to determine the ip address of the
monitor node, we need an ip address available in that cidr to be
present in the ansible facts (ansible_all_ipv[46]_addresses).
Currently we don't check if there's an ip address available during
the ceph-validate role.
As a result, the ceph-config role fails due to an empty list during
ceph.conf template creation but the error isn't explicit.
TASK [ceph-config : generate ceph.conf configuration file] *****
fatal: [0]: FAILED! => {"msg": "No first item, sequence was empty."}
With this patch we will fail before the ceph deployment with an
explicit failure message.
Resolves: rhbz#1673687
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5c39735be5)
Addressing "populate kv_store with custom ceph.conf":
Unsupported parameters for (docker_container) module. Looking at
https://docs.ansible.com/ansible/latest/modules/docker_container_module.html
shows that the correct parameter is network_mode, not network.
Signed-off-by: Gregory Orange <gregoryo2014@users.noreply.github.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d8538ad4e1)
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b7f4e3e7c7)
As of testinfra 2.0.0, the binary name is `py.test`.
But let's pin the version to 1.19.0.
Indeed, migrating to 2.0.0 requires our current testing to be reworked a bit.
Since we don't have the bandwidth ATM for this, it's better to simply
keep testing with testinfra 1.19.0.
Note that I've replaced all `testinfra` occurences by `py.test` anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b42250332a)
otherwise, it will end up with error like following:
```
FAILED! => {"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute 'ansible_hostname'"}
```
because facts won't have been gathered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1670663
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a440878533)
as of b70d54ac80 the service launched isn't
ceph-rbd-mirror@admin.service.
it's now `ceph-rbd-mirror@rbd-mirror.{{ ansible_hostname }}`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a915308477)
removing the content of this directory seems a bit agressive and cause a
redeployment to fail after a purge on debian based distrubition.
Typical error:
```
fatal: [mon0]: FAILED! => changed=false
attempts: 3
msg: No package matching 'ceph' is available
```
The following task will consider the cache is still valid, so apt
doesn't refresh it:
```
- name: update apt cache if cache_valid_time has expired
apt:
update_cache: yes
cache_valid_time: 3600
register: result
until: result is succeeded
```
since the task installing ceph packages has a `update_cache: no` it
fails:
```
- name: install ceph for debian
apt:
name: "{{ debian_ceph_pkgs | unique }}"
update_cache: no
state: "{{ (upgrade_ceph_packages|bool) | ternary('latest','present') }}"
default_release: "{{ ceph_stable_release_uca | default('') }}{{ ansible_distribution_release ~ '-backports' if ceph_origin == 'distro' and ceph_use_distro_backports else '' }}"
register: result
until: result is succeeded
```
/tmp/* isn't specific to ceph as well, so we shouldn't remove everything
in this directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3849f30f58)
using `shell` module seems to be the only way to make this task working
on rhel based distribution AND debian based distributions.
on ubuntu, using `command` ansible module fails like following
(not due to `sudo` usage or not):
```
ok: [osd1] => changed=false
cmd: command -v ceph-volume
failed_when_result: false
msg: '[Errno 2] No such file or directory: ''command'': ''command'''
rc: 2
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1653307
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 89f77589fa)
Tuned name of a task and error message to make it more user understandable
Fixes BZ 1648168 - ceph-validate : devices are not validated in non-collocated and lvm_batch scenario
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1648168
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
(cherry picked from commit 34c25ef49b)
accordingly to change introduced by b5548ea9412cd7741bee993dddcbfd9daa34cb02
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f2dcb02d21)
this is needed to properly handle semaphore synchronization for udev
actions via dmcrypt/cryptsetup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683770
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
(cherry picked from commit 15812970f0)
# Conflicts:
# library/ceph_volume.py
Referring to BZ#1683290, as dsavineau suggests, being this
bug tripleO specific, removed the ubuntu section and removed
useless mountpoints.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683290
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit 21fad7ced3)
Set directories to 755 and files to 644 to
/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} recursively instead of
setting files and directories to 755 recursively. The ceph mon
process writes files to this path with permissions 644. This update stops
ansible from updating the permissions in
/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} every time ceph mon writes
a file and increases idempotency.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683997
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
(cherry picked from commit d327681b99)
There's no need to set the client_admin_ceph_authtool_cap variable
via a set_fact task.
Instead we can set this in the role defaults.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 58a9d310d5)
The administrator keyring needs full capabilities on mds like mon,
osd and mgr.
Whithout this, the client.admin key won't be able to run commands
against mds (like ceph tell mds.0 session ls)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1672878
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dd7b7604de)
We shouldn't reset `ceph_release` with `ceph_stable_release` when
`ceph_repository` is `rhcs`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1645379
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2b60a35634)
introduce two new variables to make the check that 'wait for all osd to
be up' configurable.
It's possible that for some deployments, OSDs can take longer to be seen
as UP and IN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1676763
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 21e5db8982)
The existing task checks that the number of OSDs is equal to the number of up OSDs before continuing.
The problem is that if none of the OSDs have been discovered yet, the task will exit immediately and subsequent pool creation will fail (num_osds = 0, num_up_osds = 0).
This is related to Bugzilla 1578086.
In this change, we also check that at least one OSD is present. In our testing, this results in the task correctly waiting for all OSDs to come up before continuing.
Signed-off-by: David Waiting <david_waiting@comcast.com>
(cherry picked from commit 3930791cb7)
Removing bytes literals since rstrip only supports type String or None.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit f5c2ca3710)
The task setup chronyd called the handler disable chronyd, which of
course defeats the purpose.
Changing the task to disable ntpd instead fixes the issue of chronyd
being disabled after it got enabled.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1673664Fixes: #3582
Signed-off-by: Patrick C. F. Ernzer pcfe@redhat.com
(cherry picked from commit c605ff6a68)
Typical error:
```
fatal: [iscsi-gw0]: FAILED! =>
msg: 'an error occurred while trying to read the file ''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'': [Errno 13] Permission denied: b''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'''
```
`become: True` is not needed on the following task:
`copy crt file(s) to gateway nodes`.
Since it's already set in the main playbook (site.yml/site-container.yml)
The thing is that the files get generated in the 'fetch_directory' with
root user because there is a 'delegate_to' + we run the playbook with
`become: True` (from main playbook).
The idea here is to create files under ansible user so we can open them
later to copy them on the remote machine.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9d590f4339)
When {{omit}} is concatenated with another string, it expands to something
like __omit_place_holder__63eea0d96dd6ed867b95405e11d87dddf61f448d.
However, in these use-cases we need an empty string.
Regression introduced in d53f55e807.
Signed-off-by: Leah Neukirchen <leah.neukirchen@mayflower.de>
10m seems a bit low, indeed, a complete run can take more than 1h.
Let's increase it to 2h
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b37c4adb32)
In order to be able to retrieve udev information, we must expose its
socket. As per, https://github.com/ceph/ceph/pull/25201 ceph-volume will
start consuming udev output.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 997667a873)
without this, the command `ceph-volume lvm list --format json` hangs and
takes a very long time to complete.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7ade032807)
socket.gethostname may return a FQDN. Problem found in Linode.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
(cherry picked from commit 8cd0308f5f)
Guillaume Abrioux
Dimitri Savineau
Gregory Orange
VasishtaShastry
ToprHarley
Noah Watkins
fpantano
Kevin Coakley
David Waiting
Sébastien Han
Patrick C. F. Ernzer
Justin Riley
Leah Neukirchen
Rishabh Dave
Patrick Donnelly
Noah Watkins