if `rgw_zonegroupmaster` is not defined at the rgw instance level in
`rgw_instances` it will fallback to a wrong variable (`rgw_zonemaster`).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925247
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `ceph-rgw` may be called from `ceph-handler` in some contexts we
should avoid rerunning it unnecessarily.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating rgw with either a mon, mgr or osd, switching from
single site to a multisite rgw setup failed because of the handlers
triggered between the ansible play of the collocated daemon and the play
of the rgw. Since the multisite changes are not yet applied the handlers
fail.
The idea here is to ensure we run the multisite configuration from the
ceph-handler role before the restart happens, this way it won't complain
because of non existing multisite configuration.
(Note: this is also valid when simply changing a multisite configuration)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1888630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When creating a new pool, target_size_ratio was ignored by ansible module ceph_pool.py.
target_size_ratio is now used when pg_autoscale_mode is on.
Tests added to library tests.
This adds too the use in the role ceph-rgw.
Signed-off-by: Fabien Brachere <fabien.brachere@celeste.fr>
81233dd introduced a regression with the ceph_ec_profile module call in
the ceph-rgw role due the missing cluster module parameter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_crush_rule ansible module for replacing the command
module usage with the ceph osd crush rule commands.
This module can manage both erasure and replicated crush rules.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
This adds radosgw_zone ansible module for replacing the command module
usage with the radosgw-admin zone command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_zonegroup ansible module for replacing the command
module usage with the radosgw-admin zonegroup command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_realm ansible module for replacing the command module
usage with the radosgw-admin realm command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_user ansible module for replacing the command module
usage with the radosgw-admin user command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds connection checks before realm pulls
Curls are performed on the endpoint being pulled from
the mons and the rgws
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1731158
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we can use the ceph_pool module instead of using the command
module combined with ceph osd pool commands.
[1] bddcb439ce
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already support specifiying a custom crush rule during pool creation
in ceph-osd role but not in ceph-rgw role.
This patch adds the missing code to implement this feature.
Note this is only available for replicated pool not erasure. The rule
must also exist prior the pool creation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1855439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We were only adding the endpoints to the master zone but not to the
zonegroup.
This patch fixes the issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1839228
Signed-off-by: Ali Maredia <amaredia@redhat.com>
It is common to set templated pool names in `rgw_create_pools`, e.g.
```yaml
rgw_create_pools:
"{{ rgw_zone }}.rgw.buckets.index":
pg_num: 16
size: 3
type: replicated
```
This worked fine with Ansible 2.8, but broke in Ansible 2.9 due to a change in
the way `with_dict` works [1].
This commit replaces the use of `with_dict` with
```yaml
loop: "{{ rgw_create_pools | dict2items }}"
```
which works as intended and expands the template in the pool name.
[1]: https://docs.ansible.com/ansible/latest/porting_guides/porting_guide_2.9.html#loopsCloses#5348
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The '==' jinja2 operator (or 'equalto') has been introduced in jinja2
2.8.
On EL7, jinja2 version is 2.7 so the operator isn't present creating
templating error like:
The error was: TemplateRuntimeError: no test named '=='
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1747206
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we can't use osd pool without replicas (size: 1) by default.
We now need to set the mon_allow_pool_size_one flag to true in the ceph
configuration and add the --yes-i-really-mean-it flag to the osd pool
set size cli.
[1] https://github.com/ceph/ceph/commit/21508bd
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Sometimes, these task can timeout for some reason.
Adding these retries can help to avoid unexcepted failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Allow SSL certificate & key contents to be written to the path
specified by radosgw_frontend_ssl_certificate. This permits a
certificate to be deployed & renewal of expired certificates
through ceph-ansible.
Signed-off-by: Sam Choraria <sam.choraria@bbc.co.uk>
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In 3c31b19ab3, I fixed the `customize pool
size` task by replacing `item.size` with `item.value.size`. However, I
missed the same issue in the `when` condition.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
There is no need to get n * number of nodes the different keyrings.
Adding a `run_once: true` here avoid running a ceph command too many
times which could be impacting large cluster deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit moves containerized deployment related files to `./tasks/`
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Fabien Brachere
Dimitri Savineau
Benoît Knecht
Ali Maredia
Sam Choraria