nfs-ganesha v2.5 and 2.6 have hit EOL. Install nfs-ganesha v2.7
stable that is currently being maintained.
Signed-off-by: Ramana Raja <rraja@redhat.com>
(cherry picked from commit dfff89ce67)
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 9d88d3199f)
The ceph-agent role was used only for RHCS 2 (jewel) so it's not
usefull anymore.
The current code will fail on CentOS distribution because the rhscon
package is only avaible on Red Hat with the RHCS 2 repository and
this ceph release is supported on stable-3.0 branch.
Resolves: #4020
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7503098ca0)
The RHCS documentation mentionned in the default values and
group_vars directory are referring to RHCS 2.x while it should be
3.x.
Revolves: https://bugzilla.redhat.com/show_bug.cgi?id=1702732
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We only need to set the wal dedicated device when there's three tiers
of storage used.
Currently the block.wal partition will also be created on the same
device than block.db.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1685253
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In containerized deployment the default mds cpu quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695850
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1999cf3d19)
In containerized deployment the default osd cpu quota is too low
for production environment using NVMe devices.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695880
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c17106874c)
# Conflicts:
# roles/ceph-osd/templates/ceph-osd-run.sh.j2
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 9dd913cf8a)
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d3ae9fd05f)
Since nautilus has been released, it's now the latest stable release, it
means the tag `latest` now refers to nautilus.
`stable-3.2` isn't intended to deploy nautilus, therefore, we should
change the default value for this variable to the latest release
stable-3.2 is able to deploy (mimic).
Closes: #3734
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Also fixed rhcs_edits.txt for variable ceph_docker_registry.
Moved namespace to ceph_docker_image variable.
Signed-off-by: Phuong Nguyen <pnguyen@redhat.com>
(cherry picked from commit 3305309e87)
There's no need to set the client_admin_ceph_authtool_cap variable
via a set_fact task.
Instead we can set this in the role defaults.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 58a9d310d5)
introduce two new variables to make the check that 'wait for all osd to
be up' configurable.
It's possible that for some deployments, OSDs can take longer to be seen
as UP and IN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1676763
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 21e5db8982)
Some people use the switch playbook to perform upgrade so they end up in
the same situation than https://bugzilla.redhat.com/show_bug.cgi?id=1650572
This is applying the same fix as
729744c6a8.
We don't want to fail on key that are not present since they will get
created after the mons are updated. They will be created by the task
"create potentially missing keys (rbd and rbd-mirror)".
Signed-off-by: Sébastien Han <seb@redhat.com>
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ed42262b37)
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d1fe32998)
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fdc438dd0d)
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7774069d45)
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d4c0960f04)
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e4869ac8bd)
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
(cherry picked from commit 10538e9a23)
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit a10853c5f8)
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
ee2d52d33d missed this sync between
ceph-defaults/defaults/main.yml and group_vars/all.yml.sampl
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently a throw-away container is built to run ceph client
commands to setup users, pools & auth keys. This utilises
the same base ceph container which has all the ceph services
inside it.
This PR allows the use of a separate container if the deployer
wishes - but defaults to use the same full ceph container.
This can be used for different architectures or distributions,
which may support the the Ceph client, but not Ceph server,
and allows the deployer to build and specify a separate client
container if need be.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
Liberty is no longer available in the UCA. The last available release there
is currently Queens.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
Check firewall isn't working as expected and might break deployments.
This part of the code will be reworked soon.
Let's focus on configure_firewall code for now.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Allow user to choose between timesyncd, chronyd and ntpd
Installation will default to timesyncd since it is distributed as
part of the systemd installation for most distros.
Added note indicating NTP daemon type is not used for containerized
deployments.
Fixes issue #3086 on Github
Signed-off-by: Benjamin Cherian <benjamin_cherian@amat.com>
As per #1013 it appears that BS will soon use THP to lower TLB misses,
also disabling THP hasn't demonstrated any gains so far.
Closes: https://github.com/ceph/ceph-ansible/issues/1013
Signed-off-by: Sébastien Han <seb@redhat.com>
...with the exception of the purge operation, since
removing Calamari would still be useful for an old
cluster.
Signed-off-by: John Spray <john.spray@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
If this is set to anything other than the default value of 1 then the
--osds-per-device flag will be used by the batch command to define how
many osds will be created per device.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
fqdn configuration possibility caused a lot of trouble, it's adding a
lot of complexity because of multiple cases and the relation between
ceph-ansible and ceph-container. Moreover, there is no benefit for such
a feature.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Ramana Raja
Rishabh Dave
Dimitri Savineau
Matthew Vernon
Ali Maredia
Guillaume Abrioux
Phuong Nguyen
Sébastien Han
Kai Wembacher
Neha Ojha
Mike Christie
Andy McCrae
Christian Berendt
Andrew Schoen
Benjamin Cherian
John Spray