Prior to this change we were deploying a monitor using tis fqdn name but
we were checking its state and performing actions on it using its
shortname.
Signed-off-by: Sébastien Han <seb@redhat.com>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-create-keys unit file was removed here:
* 8bcb4646b6
* dc5fe8d415
As a consequence the systemctl preset command now fails to run since the
unit does not exist anymore. Due to the redirection in /dev/null we
don't know what's happening.
Ultimately the mon unit doesn't get enabled and the mon service won't
start after reboot.
Removing the old/non-existent unit makes the command succeed now.
ceph fix: https://github.com/ceph/ceph/pull/14226
Signed-off-by: WingkaiHo <sanguosfiang@163.com>
Co-Authored-By: Sébastien Han <seb@redhat.com>
Until now, only the first task were executed.
The idea here is to use `listen` statement to be able to notify multiple
handler and regroup all of them in `./handlers/main.yml` as notifying an
included handler task is not possible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As reported in
https://github.com/ceph/ceph-ansible/issues/1403 when devices are held
by lvm and `osd_auto_discovery` is set to true, it's not enough to check
for a partition count = 0 since Ansible does not report.
This patch also looks for 'holders' which in a case of lvm corresponds
to the name of the pv. Now we also look for holders = 0.
Fixes: #1403
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
ntp is still installed even if ntp_service_enabled is set to false.
That could be a problem if the time synchronization is managed by
something else than ceph-ansible or if you want to use different NTP
implementation as suggested in #1354.
Fixes: #1354
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guits <gabrioux@redhat.com>
If a group of hosts is empty, (for instance 'mdss', in case of a
deployment without any mds node), the playbook will fails when trying
to restart service with `"'dict object' has no attribute u'XXX'"` error.
The idea here is to force the `with_items` statements in all included handler tasks
to get at least an empty array.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
systctl tuning should be in the sysctl.d directory. This creates
a seperation from what values were set specific to ceph, and what
values were set by the operator.
Signed-off-by: Tyler Brekke <tbrekke@redhat.com>
With ' in osd_crush_location, systemd will show this error:
ceph-osd-prestart.sh[2931]: Invalid command: invalid chars ' in 'root=
Signed-off-by: Christian Zunker <christian.zunker@codecentric.de>
This fixes issue #1299. According to @ktdreyer s comment in the ticket,
he fixed the web server config so also older (non-SNI) python clients
can use the uri module here.
After the jewel release the mon startup does not generate keys, but it's
still harmless to call ceph-create-keys with jewel because this task has
a 'creates' argument that will cause it not to run if the keys already
exist.
Removing this when condition also allows the downstream CI tests to
install kraken or luminous without resetting ceph_stable_release, which does not
pertain to rhcs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This is not only for monitors, but also mds, rgw and rbd mirror so
making the var name more generic:
ceph_docker_enable_centos_extra_repo
Signed-off-by: Sébastien Han <seb@redhat.com>
Sometimes the socket appears during the 5th attempt and sometimes not so
increasing the timeout a little bit.
Signed-off-by: Sébastien Han <seb@redhat.com>
Add the possibility to create openstack pools and keys even for containerized deployments
Fix: #1321
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This removes the implicit order requirement when using OSD fragments.
When you use OSD fragments and ceph-osd role is not the last one,
the fragments get removed from ceph.conf by ceph-common.
It is not nice to have this code at two locations, but this is
necessary to prevent problems, when ceph-osd is the last role as
ceph-common gets executed before ceph-osd.
This could be prevented when ceph-common would be explicitly called
at the end of the playbook.
Signed-off-by: Christian Zunker <christian.zunker@codecentric.de>
This option was missing for rrgw, mds, rbd mirror and nfs making these
daemon impossible to run on a kv deployment with containers.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this change, ceph-ansible would install the main NFS Ganesha
server daemon on Ubuntu, but it would skip the Ceph FSALs.
Running "apt-get install nfs-ganesha" will only install the main NFS Ganesha
server. It does *not* pull in the RGW FSAL
(/usr/lib/x86_64-linux-gnu/ganesha/libfsalrgw.so)
Running "apt-get install nfs-ganesha-fsal" will install the RGW FSAL as
well as the main NFS Ganesha server package.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
This patch introduces calamari_debug option which will turn on debugging
for calamari before initializing and running it.
Signed-off-by: Boris Ranto <branto@redhat.com>
From Josh Durgin, "I'd recommend not setting vfs_cache_pressure in
ceph-ansible. The syncfs issue is still there, and has caused real
problems in the past, whereas there hasn't been good data showing lower
vfs_cache_pressure is very helpful - the only cases I'm aware of have
shown it makes little difference to performance."
https://bugzilla.redhat.com/show_bug.cgi?id=1395451
Install package from official repos rather than pip when using RHEL.
This commit fix https://bugzilla.redhat.com/show_bug.cgi?id=1420855
Also this commit Refact all `roles/ceph-*/tasks/docker/pre_requisite.yml`
to avoid a lot of duplicated code.
Fix: #1303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This was needed for Hammer and older version, not needed anymore since
we have a 'ceph' user to run ceph processes.
Signed-off-by: Sébastien Han <seb@redhat.com>
Check if ceph filesystem already exists before creating it.
If the ceph filesystem doesn't exist, execute the task only on one node.
Fix: #1314
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Oh yeah! This patch adds more fine grained control on how we run the
activation osd container. We now use --device to give a read, write and
mknodaccess to a specific device to be consumed by Ceph. We also use
SYS_ADMIN cap to allow mount operations, ceph-disk needs to temporary
mount the osd data directory during the activation sequence.
This patch also enables the support of dedicated journal devices when
deploying ceph-docker with ceph-ansible.
Depends on https://github.com/ceph/ceph-docker/pull/478
Signed-off-by: Sébastien Han <seb@redhat.com>
As of Infernalis, the Ceph daemons run as an unprivileged "ceph" UID,
and this is by design.
Commit f19b765 altered the default
civetweb port from 80 to 8080 with a comment in the commit log about
"until this gets solved"
Remove the comment about permissions on Infernalis, because this is
always going to be the case on the Ceph versions we support, and it
is just confusing.
If users want to expose civetweb to s3 clients using privileged TCP
ports, they can redirect traffic with iptables, or use a reverse proxy
application like HAproxy.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This avoids a situation where during a rolling_update we try to talk to
a mon to get the fsid and if that mon is down the playbook hangs
indefinitely.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This gives us more flexibility than installing the ceph-release package
as we can easily use different mirrors. Also, I noticed an issue when
upgrading from jewel -> kraken as the ceph-release package for those
releases both have the same version number and yum doesn't know to
update anything.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
To configure kernel the task is using "command" module which is not
respect operator ">". So this task just print to "stdout": "never >
/sys/kernel/mm/transparent_hugepage/enabled"
fix: #1319
Signed-off-by: Sébastien Han <seb@redhat.com>
Some playbooks use [0-9]*, others use \d+$
The latter is more correct since cluster name may contain numbers.
Signed-off-by: Shengjing Zhu <zsj950618@gmail.com>
So unit files were stored in /var/lib/ceph some where in
/etc/systemd/system. Now they are all under /etc/systemd/system.
closes: #1296
Signed-off-by: Sébastien Han <seb@redhat.com>
If cephx is disabled it is not necessary to include `facts_mon_fsid.yml`
in `roles/ceph-common/tasks/facts.yml`.
Fix: #1300
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
We shouldn't test directly the value of
`ceph_conf_overrides.global.osd_pool_default_pg_num` because this can
cause the playbook to fail if the key `global` is not present in
`ceph_conf_overrides`. Therefore we have to use the facts that have been
defined earlier.
Fix: #1242
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On ubntu systems mkdir is in /bin where on atomic it is /usr/bin/.
We use the shell built-in function "command" to find its right location.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we now only support systemd has an init system we can finally
treat containers as processes using systemd and this for all the
distros.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits allows us to restart Ceph daemon machine by machine instead
of restarting all the daemons in a single shot.
Rework the structure of the handler for clarity as well.
Signed-off-by: Sébastien Han <seb@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some users purge their environments and leave it in a non-optimal state.
e.g: packages are still installed but /etc/ceph and /var/lib/ceph don't
exist anymore. This will result in multiple failures across the play,
sometimes hard to detect. Populating these directories "just in case"
should help us solving these problems.
Closes: #1253
Signed-off-by: Sébastien Han <seb@redhat.com>
Sometimes users for testing, tend to delete the whole /var/lib/ceph and
then run ansible again, OSD will never come up if we do not create their
directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
This patch makes sure we set the proper pool size on the rbd pool.
Usually during bootstrap the rbd pool size is not honoured so we need to
add this workaround.
Signed-off-by: Sébastien Han <seb@redhat.com>
This allows the user to set ip_version to either ipv4 or ipv6. This
resolves a bug where monitor_address is set to an ipv6 address, but the
template fails to render because it's hardcoded to look for an 'ipv4'
key in the ansible facts.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1416010
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: bz#1416010
could have scenario where different openstack components would
use the same pool, but the logic would create the same pool
more than once
add unique filter to account for this
Allow for more operator flexibility in the `rgw frontends` setting
while maintaining backwards compatibility with the old vars. This
allows an operator to, for example, use the civetweb settings for
implementing SSL ports.
For available civetweb configuration parameters, see:
https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md
It is not enough to check for the mds to exists, it actually always does
because we declare the variable. So we need to make sure that there is a
mds host.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we introduced config_overrides we removed a lot of options from
the default template. In some cases, like mds pool, openstack pools etc
we need to know the amount of PGs required. The idea here is to skip the
task if ceph_conf_overrides.global.osd_pool_default_pg_num is not define
in your `group_vars/all.yml`.
Closes: #1145
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
This allows for the role to be used with ansible-galaxy and to fix the
include in all the meta/main.yml files in the roles.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The libcephfs1 package was removed from ceph-common in
cb1c06901e, however it was not synced
to group_vars/all.yml.sample using the `generate_group_vars_sample.sh`
script. This fixes up the comment formatting in the ceph-common
defaults and brings the group_vars sample back into sync.
Prior to this change, a playbook run with '--tags' or '--skip-tags'
would fail, because the ceph-common role would not include the
release.yml task, and this file defines critical things like
ceph_release.
Thanks Andrew Schoen <aschoen@redhat.com> for help with the fix.
Task put initial mon keyring in mon kv store from
ceph-mon/tasks/ceph_keys.yml is failing when cephx is disabled. The root
cause is that variable monitor_keyring is not populated by any task from
deploy_monitors.yml.
Fixes: #1211
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
Once we have our first monitor up and running we need to add it to the
monitor store as a safety measure. Just in case the local file gets
deleted and you need to add a new monitor. Now you can retrieve this key
like this:
ceph config-key get initial_mon_keyring > initial_mon_keyring.txt
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need to become root on local_action. This will event trigger
an error on some systems as it will try to run a sudo command. If the
current user does not have passwordless sudo, Ansible will fail. Anyway
using the current user is perfectly fine and no elevation privilege is
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
The Keystone v2 APIs are deprecated and scheduled to be removed in
Q release of Openstack. This adds support for configuring RGW to
use the current Keystone v3 API.
The PKI keys are used to decrypt the Keystone revocation list when
PKI tokens are used. When UUID or Fernet token providers are used in
Keystone, PKI certs may not exist, so we now accommodate this scenario
by allowing the operator to disable the PKI tasks.
Jewel added support for user/pass authentication with Keystone,
allowing deployers to disable Keystone admin token as required
for production deployments.
This implements configuration for the new RGW Keystone user/pass
authentication feature added in Jewel.
See docs here: http://docs.ceph.com/docs/master/radosgw/keystone/
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the initial mon keyring
doesn't exist so we are generating a new one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do not need to run another condition for 'ceph_rhcs' since the
include we came from already has it, so we are already inside this
condition.
We also spell red hat entirely instead of rh and we remove capital
letters.
Signed-off-by: Sébastien Han <seb@redhat.com>
When `ceph_stable_rh_storage` is True, every cluster node should have a
`/etc/apt/preferences.d/rhcs.pref` file with the following contents:
```
Explanation: Prefer Red Hat packages
Package: *
Pin: release o=/Red Hat/
Pin-Priority: 999
```
ceph-deploy already did this when used with ice-setup, and we need to do
the same thing with the ceph-ansible stack.
Closes: #1182 and https://bugzilla.redhat.com/show_bug.cgi?id=1404515
Signed-off-by: Sébastien Han <seb@redhat.com>
Only when ceph_origin == "upstream", install_on_redhat.yml will include
redhat_ceph_repository.yml, same as debian.
In redhat_ceph_repository.yml, ceph_custom_repo will be added.
But in check_mandatory_vars.yml, ceph_origin=="upstream" can't be combined
with ceph_custom
If previous check was not run, .stdout_lines is not a valid key on the dictionary.
To get around this, use .get("stdout_lines") instead.
Also add in a default empty list
in hammer, ceph-common depended on libcephfs (indirectly, via
python-cephfs). this is no longer the case in jewel or later, so it can
be removed from debian_ceph_packages
Signed-off-by: Casey Bodley <cbodley@redhat.com>
For readibility and clarity we do not run any tasks directly in the
main.yml file. This file should only contain include, which helps us
later to apply conditionnals if we want to.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit re-uses some of the existing ceph-ansible variables for a
containirzed deployment. There is no reasons why we should add new
variables for the containerized deployment.
Signed-off-by: Sébastien Han <seb@redhat.com>
mon_group_name variable can be used to override mons group, but
this task assumes the group is always 'mons'. So we need to use
the var to find the group name instead.
Before this patch only the address for the first mon would show
in the ceph.conf even if there were multiple mons in the inventory.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Once the monitor process starts it will also trigger `ceph-create-keys`
which will collect the admin key and bootstrap keys. We used to force
this command because we were having issues on some distros like centos
7.0 and 7.1 not triggering this. This is fixed on centos 7.2 and not an
issue on ubuntu 14.04 or 16.04 so we can remove this task. If the
monitor hangs or fails to start the playbook will fail right after at
the "wait for client.admin key exists" task after 300sec.
Closes: #1161
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the fsid doesn't exist so we
are creating a new one. Later the ceph.conf gets updated with a wrong
fsid which causes problems for clients and ceph processes.
Closes: #1148
Signed-off-by: Sébastien Han <seb@redhat.com>
Adding that avoids this bug:
https://github.com/ansible/ansible/issues/18206
Without that you'll get failures like:
TASK [ceph-mon : set keys permissions]
*****************************************
task path:
/home/andrewschoen/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:31
fatal: [mon0]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute 'stdout_lines'"}
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
We removed the "apache" setting for "radosgw_frontend" in
adfdf6871e.
As part of that change, we removed the final references to
ceph-extra.repo, but I failed to clean up this file itself.
Now that nothing uses this file, delete it.
This file contained the sole reference to redhat_distro_ceph_extra, so
we can drop that variable as well.
Refactor the code using 'package' module
Fix Issue #520
(However it doesn't cover all cases because some cases are not refactorable.
Ex: because of diverging packages name between distribution)
Sébastien Han
Konstantin Shalygin
WingkaiHo
Guillaume Abrioux
Daniel Horak
Concubidated
yuliyang
Christian Zunker
Daniel Marks
Andrew Schoen
Ken Dreyer
Boris Ranto
WingKai Ho
Patrick Donnelly
Tobias Florek
Shengjing Zhu
Andrew Schoen
Chris Wells
tynorth-cisco
Logan V
Musee Ullah
Davide Belloni
Alfredo Deza
Casey Bodley
Jirayut Nimsaeng