The dashboard/monitoring stack can be deployed via the dashboard_enabled
variable. But there's nothing similar if we can to remove that part only
and keep the ceph cluster up and running.
The current purge playbooks remove everything.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786691
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8e4ef7d6da)
In order to avoid false positive in the CI that I've been unable to
reproduce.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7fd1c2298)
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 71a5e666e3)
When deploying the ceph OSD via the packages then the ceph-osd@.service
unit is configured as enabled-runtime.
This means that each ceph-osd service will inherit from that state.
The enabled-runtime systemd state doesn't survive after a reboot.
For non containerized deployment the OSD are still starting after a
reboot because there's the ceph-volume@.service and/or ceph-osd.target
units that are doing the job.
$ systemctl list-unit-files|egrep '^ceph-(volume|osd)'|column -t
ceph-osd@.service enabled-runtime
ceph-volume@.service enabled
ceph-osd.target enabled
When switching to containerized deployment we are stopping/disabling
ceph-osd@XX.servive, ceph-volume and ceph.target and then removing the
systemd unit files.
But the new systemd units for containerized ceph-osd service will still
inherit from ceph-osd@.service unit file.
As a consequence, if an OSD host is rebooting after the playbook execution
then the ceph-osd service won't come back because they aren't enabled at
boot.
This patch also adds a reboot and testinfra run after running the switch
to container playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881288
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fa2bb3af86)
This commit makes all jobs authenticating to docker hub in order to
avoid the rate limit.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 40307f810c)
Otherwise it might try to use the system installed version of ansible
when there's one available.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d9acb5e6d)
The add-mgrs scenario is still using the testinfra command instead of
pytest so the tests exectution are failling.
ERROR: InvocationError for command could not find executable testinfra
This also adds the missing --ssh-config option to testinfra.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 92f538f1af)
The shrink scenarios don't need the docker variables (except for OSD).
Removing pytest for shrink-mgr.
Adding environment variables for xxx_to_kill ansible variable.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2f4413f5ce)
Add new scenario 'all_in_one' in order to catch more collocated related
issues.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3e7dbb4b16)
This commit replaces the playbook used for add_osds job given
accordingly to the add-osd.yml playbook removal
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fef1cd4c4b)
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 1ecb3a9352)
Since we now support podman, let's rename the playbook so it's more
generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7bc7e3669d)
This commit adds a playbook to be played before we run purge playbook,
it first creates an rbd image then map an rbd device on client0 so the
purge playbook will try to unmap it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit db77fbda15)
It doesn't make sense to test the old 3.0.x container images with
nautilus+ ceph releases.
Also disable the dashboard deployment and switch to bluestore backend.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3c2840da03)
This commit reflects the recent changes in ceph/ceph-build#1406
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bcaf8cedee)
The secondary vagrant variables didn't have the grafana vm variable
set which create an vagrant error.
There was an error loading a Vagrantfile. The file being loaded
and the error message are shown below. This is usually caused by
an invalid or undefined variable.
This patch also changes the ssh-extra-args parameter to ssh-common-args
to get the same values for ssh/sftp/scp. Otherwise we can see warnings
from ansible and some tasks are failing.
[WARNING]: sftp transfer mechanism failed on [mon0]. Use ANSIBLE_DEBUG=1
to see detailed information
It also updates the ssh-common-args value for the rgw-multisite scenario
to reflect the ANSIBLE_SSH_ARGS environment variable value.
Finally changing the IP addresses due to the Vagrant refact done in the
commit 778c51a
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 010158ff84)
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
(cherry picked from commit e695efcaf7)
setting it at extra vars level prevent from setting it per node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5bb6a4da42)
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and RGW and then runs shrink-rgw.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 236b081a3a)
# Conflicts:
# tox.ini
this setting is not needed here since we explicitely set it for
container and non container context.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 87b173d022)
Add a new functional test that deploys Ceph cluster with three nodes for
MON, OSD and RBD Mirror and, then, runs shrink-rbdmirror.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit f80521f773)
# Conflicts:
# tox.ini
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MGR and then runs shrink-mgr.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 5c95c34d4b)
# Conflicts:
# tox.ini
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MDS and then runs shrink-mds.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 324b3b4a6c)
# Conflicts:
# tox.ini
adding back a sleep 30s after nodes have rebooted before running
testinfra.
This was removed accidentally by d5be83e
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ca84a5359f)
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34f9d51178)
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a78fb209b1)
This commit adds `pytest-rerunfailures` in requirements.txt so we can
retry failing test in testinfra to avoid false positive. (eg: sometimes it
can happen for some reason a service takes too much time to start)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4708b7615f)
In order to support ansible 2.8 with testinfra we need to use the
latest release (3.0.x).
Adding ssh-config option to py.test.
Also bumping the pytest and xdist version.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit de147469d7)
Since a1a871c we don't need to copy the infrastructure playbooks
under the ceph-ansible root directory.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0f89a3f7a5)
The current lvm_osds only tests filestore on one OSD node.
We also have bs_lvm_osds to test bluestore and encryption.
Let's use only one scenario to test filestore/bluestore and with or
without dmcrypt on four OSD nodes.
Also use validate_dmcrypt_bool_value instead of types.boolean on
dmcrypt validation via notario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 52b9f3fb28)
Add a playbook that deploys manager on a new node and adds that node to
the already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit d2cfd8b780)
Add a tox scenario that adds a new RGW node as a part of already
deployed Ceph cluster and deploys RGW there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit f201222447)
Conflicts:
tox.ini
replaced "dev" and "nautilus" during cherry-pick.
Add a tox scenario that adds a new RBD mirror node as a part of already
deployed Ceph cluster and deploys RBD mirror there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 221b2b4988)
Conflicts:
tox.ini
"dev" was to replaced by "nautilus" in "envlist"
update scenario is now handled by tox-update.ini file so we shoudn't
have update reference in tox.ini file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8ab6a3391f)
This test deploys a luminous cluster with ceph-disk created osds
and then upgrades to nautilus and migrates those osds to ceph-volume.
The nodes are then rebooted and cluster state verified.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 399a821439)
Add a playbook that deploys a new monitor on a new node, adds that node
to the Ceph cluster and the monitor to the quorum and updates the ceph
configuration file on OSD nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit d5967af7fb)
It's usefull to have logs in debug mode enabled in order to have
more information for developpers.
Also reindent to json file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d25af1b872)
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit c0dfa9b61a)
there's no need to test this on all scenarios.
testing idempotency on all_daemons should be enough and allow us to save
precious resources for the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 136bfe096c)
On stable-4.0 branch we don't want to use dev setup but stable
release (nautilus).
Also update the container image tag to reflect this change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
On containerized CI jobs the playbook executed is purge-cluster.yml
but it should be set to purge-docker-cluster.yml
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As of testinfra 2.0.0, the binary name is `py.test`.
But let's pin the version to 1.19.0.
Indeed, migrating to 2.0.0 requires our current testing to be reworked a bit.
Since we don't have the bandwidth ATM for this, it's better to simply
keep testing with testinfra 1.19.0.
Note that I've replaced all `testinfra` occurences by `py.test` anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
I didn't use the `ceph/ubuntu-bionic` image because it's broken at the
time of writing this commit. I'll switch back to `ceph/ubuntu-bionic` as
soon as it will be fixed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Harald Jensås
Rishabh Dave
Andrew Schoen