In containerized deployments we now inherite from the
radosgw_civetweb_options options when bootstrapping the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
When distributing ceph-nfs role, creation of rados index object
fails as it assumes availability of client.admin locally.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1607970
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
Check if the interface provided:
* exists in the gathered facts (thus on the system)
* is active
* has an IP address (depending on ip_version )
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Sébastien Han <seb@redhat.com>
Ansible 2.4 is currently end-of-life.
Ansible 2.5 will go end-of-life after Ansible 2.7 is released.
Fixes: #2901
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Do not run device validation on every hosts, only on OSD nodes.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
We know make sure that:
* devices are actually block special files
* length of dedicated_device is identical to devices
Signed-off-by: Sébastien Han <seb@redhat.com>
Since `V2.6-stable` is available and has packages for `mimic`, let's
update this default value accordingly so nfs nodes can be deployed with
mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Relying on `copy_admin_key` to import created keys on client nodes makes
us obliged to copy admin key on those nodes which is not something we might
want.
We should use the fact `condition_copy_admin_key` which will be set to
`True` when the delegated node is a mon which means we can import keys
without taking care of admin keyring.
Fixes: #2867
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Follow up on #2784
We must check in the generated fact `_disabled_ceph_mgr_modules` to
enable disabled mgr module.
Otherwise, this task will be skipped because it's not comparing the
right list.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized deployment, if a mon is stopped, the socket is not
purged and can cause failure when a cluster is redeployed after the
purge playbook has been run.
Typical error:
```
fatal: [osd0]: FAILED! => {}
MSG:
'dict object' has no attribute 'osd_pool_default_pg_num'
```
the fact is not set because of this previous failure earlier:
```
ok: [mon0] => {
"changed": false,
"cmd": "docker exec ceph-mon-mon0 ceph --cluster test daemon mon.mon0 config get osd_pool_default_pg_num",
"delta": "0:00:00.217382",
"end": "2018-07-09 22:25:53.155969",
"failed_when_result": false,
"rc": 22,
"start": "2018-07-09 22:25:52.938587"
}
STDERR:
admin_socket: exception getting command descriptions: [Errno 111] Connection refused
MSG:
non-zero return code
```
This failure happens when the ceph-mon service is stopped, indeed, since
the socket isn't purged, it's a leftover which is confusing the process.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When you delete a zone without removing from zonegroup, the period update would
fail since that command needs to load the zone and zonegroup to be able to
update the master. Period update would fail with an error like this:
radosgw-admin period update --commit
-1 Cannot find zone id= (name=), switching to local zonegroup configuration
-1 Cannot find zone id= (name=)
Signed-off-by: Shilpa Jagannath <smanjara@redhat.com>
As of Kraken, the journal code does not use the hdparm command anymore
so we can remove it from our package dependency list.
Fixes: https://github.com/ceph/ceph-ansible/issues/1402
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit f6910efa24389c264062963b2054c7cd29ffebb3)
The container image recently merged both cluster and mon log into a
single stream. Following this, we now see this warning coming from the
container image:
2018-06-19 13:44:01.542990 7ff75b024700 1 mon.vm02@1(peon).log
v57928205 unable to write to '/var/log/ceph/ceph.log' for channel
'cluster': (2) No such file or directory
So we now tell the mon to not log cluster log on the filesystem.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591771
Signed-off-by: Sébastien Han <seb@redhat.com>
We forgot to add mgr_group_name when checking for the mon repo, thus the
conditional on the next task was failing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1598185
Signed-off-by: Sébastien Han <seb@redhat.com>
The data structure has slightly changed on mimic.
Prior to mimic, it used to be:
```
{
"enabled_modules": [
"status"
],
"disabled_modules": [
"balancer",
"dashboard",
"influx",
"localpool",
"prometheus",
"restful",
"selftest",
"zabbix"
]
}
```
From mimic it looks like this:
```
{
"enabled_modules": [
"status"
],
"disabled_modules": [
{
"name": "balancer",
"can_run": true,
"error_string": ""
},
{
"name": "dashboard",
"can_run": true,
"error_string": ""
}
]
}
```
This means we can't simply check if `item` is in `item in
_ceph_mgr_modules.disabled_modules`
the idea here is to use filter `map(attribute='name')` to build a list
when deploying mimic.
Fixes: #2766
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The container runs for 300 sec, then dies and removes itself thanks to
the '--rm' option, so there is no point of removing it. Also this is
causing failure under some circonstances.
Closing: https://bugzilla.redhat.com/show_bug.cgi?id=1568157
Signed-off-by: Sébastien Han <seb@redhat.com>
We now add a default 'rbd' application type to each pool we create. This
will remove the warning: " application not enabled on N pool(s) "
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1590275
Signed-off-by: Sébastien Han <seb@redhat.com>
The script ceph-osd-run.sh holds the config options to start the
container, if one of these options are modified we must restart the
container. This was not the case before becauase the 'notify' flag
wasn't present.
Closing: https://bugzilla.redhat.com/show_bug.cgi?id=1596061
Signed-off-by: Sébastien Han <seb@redhat.com>
When using a module there is no need to apply this Ansible option. The
module will handle the idempotency on its own. So the module decides
wether or not the task has changed during the execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
During 226f80c22b only Debian package
installs had the correct state set to ensure packages were upgraded when
the "upgrade_ceph_packages" var was set to true.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
--net=host was hardcoded in the startup line so even though
mon_docker_net_host was set to False the net option would always be
activated.
mon_docker_net_host is set to True by default so this commit does not
change the behaviour.
Signed-off-by: Sébastien Han <seb@redhat.com>
Depending on your setup, ceph-mgr might get restarted multiple times.
When this is done to fast, systemd will prevent further restarts because of
configured limits in the ceph-mgr systemd unit file.
Resetting the failure count will prevent this problem. The reset is done before
the restart so in case of a real problem during the restart it still fails.
Fixes: #2768
Signed-off-by: Christian Zunker <christian.zunker@codecentric.cloud>
Currently we expect that if configure_firewall is set to True to have
firewalld enabled and running. Let's enforce that.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1589146
Signed-off-by: Sébastien Han <seb@redhat.com>
As discussed with the cores, the current limits are too low and should
be bumped to higher value.
So now by default monitors get 3GB and OSDs get 5GB.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591876
Signed-off-by: Sébastien Han <seb@redhat.com>
The 'dummy' container is created only on first client node, it means we
must seek to destroy this container only on this node, otherwise this
can cause failure like following :
```
fatal: [192.168.24.8]: FAILED! => {"changed": false, "cmd": ["docker", "rm",
"-f", "ceph-create-keys"], "delta": "0:00:00.023692", "end": "2018-06-12
20:56:07.261278", "msg": "non-zero return code", "rc": 1, "start":
"2018-06-12 20:56:07.237586", "stderr": "Error response from daemon: No such
container: ceph-create-keys", "stderr_lines": ["Error response from daemon: No
such container: ceph-create-keys"], "stdout": "", "stdout_lines": []}
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1590746
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch if you were running on a Red Hat system,
ceph-ansible would try to configure firewalld for you without the
operators's consent.
Now you can enable or disable the fw configuration by setting
configure_firewall to either true or false.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1589146
Signed-off-by: Sébastien Han <seb@redhat.com>
The current secure cluster play runs with all the monitors. The rerun
of this task is unnecessary and can be skipped.
Fixes: #2737
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
combining `run_once: true` with `inventory_hostname ==
groups.get(client_group_name) | first` might cause bug when the only
node being run is not the first in the group.
In a deployment with a single client node it might cause issue because
sometimes keyring won't be created since the task could be definitively
skipped.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1588093
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have the ability to deploy a containerized version of ceph-iscsi.
The result is similar to the non-containerized version, you simply have
3 containers running for the following services:
* rbd-target-api
* rbd-target-gw
* tcmu-runner
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508144
Signed-off-by: Sébastien Han <seb@redhat.com>
Potential error if someone doesnt pass the mode in `keys` dict for
client nodes:
```
fatal: [client2]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'dict object' has no attribute 'mode'
The error appears to have been in '/home/guits/ceph-ansible/roles/ceph-client/tasks/create_users_keys.yml': line 117, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: get client cephx keys
^ here
exception type: <class 'ansible.errors.AnsibleUndefinedVariable'>
exception: 'dict object' has no attribute 'mode'
```
adding a default value will avoid the deployment failing for this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Functional tests are broken when testing against 'dev' release (ceph).
Adding a dummy value here will make it possible to run ceph-ansible CI
against dev ceph release.
Typical error:
```
> if request.node.get_marker("from_luminous") and ceph_release_num[ceph_stable_release] < ceph_release_num['luminous']:
E KeyError: 'dev'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1487d93f21b609a637053f5b33cd2a4e408d00)
We need to do this because on dev or rhcs installs ceph_stable_release
is not mandatory and the firewall check tasks have a task that is
conditional based off the installed version of ceph. If we perform those
checks after package install then they will not fail on dev or rhcs
installs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the `docker_exec_cmd` fact set in client role when there is no monitor
in inventory is wrong, `ceph-client-{{ hostname }}` is never created so
it will fail anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When configuring openstack, the created keyrings aren't copied over to
all monitors nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1588093
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Refact of 8704144e31
There is no need to have duplicated tasks for this. The rgw pools
creation should be delegated on a monitor node se we don't have to care
if the admin keyring is present on rgw node.
By the way, only one task is needed to create the pools, we just need to
use the `docker_exec_cmd` fact already defined in `ceph-defaults` to
achieve it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1550281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The initial keyring is generated from ansible server locally and the snippet works well for both v2 and v3 of python.
I don't see any reason why we should explicitly invoke`python2` instead of just `python`.
In some setups, `python2` is not symlinked to `python`; while `python` and `python3` refer to v2 and v3 respectively.
Signed-off-by: Ha Phan <thanhha.work@gmail.com>
Prior to this commit the firewall tasks were not opening the ceph-mgr
ports. This would lead to unclean configuration since the ceph-mgr
daemons can not connect to the OSDs.
Thi commit opens the right ports on the ceph-mgr nodes to talk with the
OSDs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1526400
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph command has to be executed from one of the monitor containers
if not admin copy present in RGWs. Task has to be delegated then.
Adds test to check proper RGW pool creation for Docker container scenarios.
Signed-off-by: Jorge Tudela <jtudelag@redhat.com>
Since the openstack_config.yml has been moved to `ceph-osd` we must move
this `set_fact` in ceph-osd otherwise the tasks in
`openstack_config.yml` using `openstack_keys` will actually use the
defaults value from `ceph-defaults`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1585139
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The first 14.x tag has been cut so this needs to be added so that
version detection will still work on the master branch of ceph.
Fixes: https://github.com/ceph/ceph-ansible/issues/2671
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This is a follow up on #2628.
Even with the openstack pools creation moved later in the playbook,
there is still an issue because OSDs are not all UP when trying to
create pools.
Adding a task which checks for all OSDs to be UP with a `retries/until`
condition should definitively fix this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When playing ceph-mds role, mon nodes have set a fact with the default
pg num for osd pools, we can simply default to this value for cephfs
pools (`cephfs_pools` variable).
At the moment the variable definition for `cephfs_pools` looks like:
```
cephfs_pools:
- { name: "{{ cephfs_data }}", pgs: "" }
- { name: "{{ cephfs_metadata }}", pgs: "" }
```
and we have a task in `ceph-validate` to ensure `pgs` has been set to a
valid value.
We could simply avoid this check by setting the default value of `pgs`
to `hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num']` and
let to users the possibility to override this value.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1581164
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in `ceph-osd` there is no need to set `docker_exec_cmd` since the only
place where this fact is used is in `openstack_config.yml` which
delegate all docker command to a monitor node. It means we need the
`docker_exec_cmd` fact that has been set referring to `ceph-mon-*`
containers, this fact is already set earlier in `ceph-defaults`.
By the way, when collocating an OSD with a MON it fails because the container
`ceph-osd-{{ ansible_hostname }}` doesn't exist.
Removing this task will allow to collocate an OSD with a MON.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1584179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating mds on monitor node, the cephpfs will fail
because `docker_exec_cmd` is reset to `ceph-mds-monXX` which is
incorrect because we need to delegate the task on `ceph-mon-monXX`.
In addition, it wouldn't have worked since `ceph-mds-monXX` container
isn't started yet.
Moving the task earlier in the `ceph-mds` role will fix this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
You can now use RGW_ZONE and RGW_ZONEGROUP on each rgw host from your
inventory and assign them a value. Once the rgw container starts it'll
pick the info and add itself to the right zone.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1551637
Signed-off-by: Sébastien Han <seb@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move cephfs pools creation in `ceph-mds` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The NSS PKI database is needed only if radosgw_keystone_ssl
is explicitly set to true, otherwise the SSL integration is
not enabled.
It is worth noting that the PKI support was removed from Keystone
starting from the Ocata release, so some code paths should be
changed anyway.
Also, remove radosgw_keystone, which is not useful anymore.
This variable was used until fcba2c801a.
Now profiles drives the setting of rgw keystone *.
Signed-off-by: Luigi Toscano <ltoscano@redhat.com>
The LVM lvcreate fails if the disk already has a GPT header.
We create GPT header regardless of OSD scenario. The fix is to
skip header creation for lvm scenario.
fixes: https://github.com/ceph/ceph-ansible/issues/2592
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
During a rolling update, OSDs are restarted twice currently. Once, by the
handler in roles/ceph-defaults/handlers/main.yml and a second time by tasks
in the rolling_update playbook. This change turns off restarts by the handler.
Further, the restart initiated by the rolling_update playbook is more
efficient as it restarts all the OSDs on a host as one operation and waits
for them to rejoin the cluster. The restart task in the handler restarts one
OSD at a time and waits for it to join the cluster.
A dev or rhcs install does not require ceph_stable_release to be set and
instead generates that by looking at the installed ceph-version.
However, at this point in the playbook ceph may not have been installed
yet and ceph-common has not be run.
Fixes: https://github.com/ceph/ceph-ansible/issues/2618
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The validation module does not get config options with the template
syntax rendered, so we're gonna remove that and just default it to
False. The backwards compat was schedule to be removed in 3.1 anyway.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When devices is not defined because you want to use the 'lvm'
osd_scenario but you've made a mistake selecting that scenario these
tasks should not fail.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Extra space in systemctl list-units can cause restart_osd_daemon.sh to
fail
It looks like if you have more services enabled in the node space
between "loaded" and "active" get more space as compared to one space
given in command the command[1].
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1573317
Signed-off-by: Sébastien Han <seb@redhat.com>
Check whether a mgr module is supposed to be disabled before disabling
it and whether it is already enabled before enabling it.
Signed-off-by: Michael Vollman <michael.b.vollman@gmail.com>
We can simply reference the template name since it exists within the
role that we are calling. We don't need to check the ANSIBLE_ROLE_PATH
or playbooks directory for the file.
To make the package installation more efficient we should install
packages as a list rather than as individual tasks or using a
"with_items" loop. The package managers can handle a list passed to them
to install in one go.
We can use a specified list and substitute any packages that are not to
be installed with the ceph-common package, which is installed on every
package install, then apply the unique filter to the package install
list.
There is no need to stat for created mgr keyrings since they are created
anyway when deploying a ceph cluster > jewel. In case of a jewel
deployment we won't enter that block.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This file is a leftover from PR ceph/ceph-ansible#2516
It is not used anymore so it can be removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Until all the mons haven't been updated to Luminous, there is no way to
create a key. So we should do the key creation in the mon role only if
we are not part of an update.
If we are then the key creation is done after the mons upgrade to
Luminous.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Sébastien Han <seb@redhat.com>
trying to mask target when `/etc/systemd/system/target.service` doesn't
exist seems to be a bug.
There is no need to mask a unit file which doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The order of fs.aio-max-nr (which is hard-coded to 1048576) means that
if you set fs.aio-max-nr in os_tuning_params it will effectively be
ignored for bluestore scenarios.
To resolve this we should move the setting of fs.aio-max-nr above the
setting of os_tuning_params, in this way the operator can define the
value of fs.aio-max-nr to be something other than 1048576 if they want
to.
Additionally, we can make the sysctl settings happen in 1 task rather
than multiple.
trying to set the default value for pg_num to
`hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num'])` will
break in case of external client nodes deployment.
the `pg_num` attribute should be mandatory and be tested in future
`ceph-validate` role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized deployment,
when upgrading from jewel to luminous, mgr keyring creation fails because the
command to create mgr keyring is executed on a container that is still
running jewel since the container is restarted later to run the new
image, therefore, it fails with bad entity error.
To get around this situation, we can delegate the command to create
these keyrings on the first monitor when we are running the playbook on the last monitor.
That way we ensure we will issue the command on a container that has
been well restarted with the new image.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The Debian and SuSE installs for nfs-ganesha on the non-rhcs repository
requires you to allow_unauthenticated for Debian, and disable_gpg_check
for SuSE. The nfs-ganesha-rgw package already does this, but the
nfs-ganesha-ceph package will fail to install because of this same
issue.
This PR moves the installations to happen when the appropriate flags are
set to True (nfs_obj_gw & nfs_file_gw), but does it per distro (one for
SuSE and one for Debian) so that the appropriate flag can be passed to
ignore the GPG check.
When 'ceph_nfs_disable_caching' is set to True, disable attribute
caching done by Ganesha for all Ganesha exports.
Signed-off-by: Ramana Raja <rraja@redhat.com>
If we are in a middle of an update we want to get the new package
version being installed so the task that copies the repo files should
not be skipped.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1572032
Signed-off-by: Sébastien Han <seb@redhat.com>
The apt-cache update can fail due to transient issues related to the
action being a network operation. To reduce the impact of these
transient failures this patch adds a retry to the update_cache task.
However, the apt_repository tasks which would perform an apt_update
won't retry the apt_update on a failure in the same way, as such this PR
moves the apt_update into an individual task, once per role.
Finally, the apt_repository tasks no longer have a changed_when: false,
and the apt_cache update is only performed once per role, if the
repositories change. Otherwise the cache is updated on the "apt" install
tasks if the cache_timeout has been reached.
the value in `docker_exec_client_cmd` doesn't allow to check for
existing pools because it's set with a wrong value for the entrypoint
that is going to be used.
It means the check were going to fail anyway even if pools actually exist.
Using jinja syntax to set `docker_exec_cmd` allows to handle the case
where you don't have monitors in your inventory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If openstack_pools contains an application key it will be used to apply
this application pool type to a pool.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1562220
Signed-off-by: Sébastien Han <seb@redhat.com>
As of ceph 12.2.5 the type of the parameter `type` is not a name anymore but
an id, therefore an `int` is expected otherwise it will fail with the
following error
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The last mon creates the keys with a particular mode, while copying them
to the other mons (first and second) we must re-use the mode that was
set.
The same applies for the client node, the slurp preserves the initial
'item' so we can get the mode for the copy.
Signed-off-by: Sébastien Han <seb@redhat.com>
This key is created after the last mon is up so there is no need to try
to push it from the first mon. The initia mon container is not creating
the mgr key, ansible does. So this key will never exist.
The key will go into the fetch dir once the last mon is up, then when
the ceph-mgr plays it will try to get it from the fetch directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the initial bootstrap of the first mon, the monmap file is
destroyed so it's not available and ansible will never find it.
Signed-off-by: Sébastien Han <seb@redhat.com>
Useful for softwares that do data collection/monitoring like collectd.
They can connect to the socket and then retrieve information.
Even though the sockets are exposed now, I'm keeping the docker exec to
check the socket, this will allow newer version of ceph-ansible to work
with older versions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1563280
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have the ability to detect the uid/gid of the ceph user depending
on the distribution we are running on and so we are doing non-container
deployements.
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes the case where the playbook died and never removed the
container. So now, once the container exits it will remove itself from
the container list.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1568157
Signed-off-by: Sébastien Han <seb@redhat.com>
If the user has set copy_admin_key to true we assume he/she wants to
import the key in Ceph and not only create the key on the filesystem.
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-authtool does not support raw arguements so we have to quote caps
declaration like this allow 'bla bla' instead of allow bla bla
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1568157
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit does a couple of things:
* use a common.yml file that contains things that can be played on both
container and non-container
* refactor the ability to copy the admin key to the nodes
Signed-off-by: Sébastien Han <seb@redhat.com>
Red Hat is now using tags[3,latest] for image rhceph/rhceph-3-rhel7.
Because of this, the ceph_uid conditional passes for Debian
when 'ceph_docker_image_tag: latest' on RH deployments.
I've added an additional task to check for rhceph image specifically,
and also updated the RH family task for ceph/daemon [centos|fedora]tags.
Signed-off-by: Randy J. Martinez <ramartin@redhat.com>
When installing rhcs on Debian systems the red hat repos must have the
highest priority so we avoid packages conflicts and install the rhcs
version.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1565850
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need to check for a running cluster n*nodes time in
`ceph-defaults` so let's add a `run_once: true` to save some resources
and time.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Regardless if the partition is 'ceph' or something else, we don't want
to be as strick as checking for a particular partition.
If the drive has a partition, we just don't do anything.
This solves the case where the server reboots, disks get a different
/dev/sda (node) allocation. In this case, prior to restarting the server
/dev/sda was an OSD, but now it's /dev/sdb and the other way around.
In such scenario, we will try to prepare the OSD and create a new
partition, so let's not mess around with devices that have partitions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498303
Signed-off-by: Sébastien Han <seb@redhat.com>
allow_multimds will be officially deprecated in Mimic, specify it
only for all versions of Ceph where it was declared stable. Going
forward, specify only max_mds.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
NFS-ganesha cannot start is the nfs-server service
is running. This commit stops nfs-server in case it
is running on a (debian, redhat, suse) node before
the nfs-ganesha service starts up
fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1508506
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Add a variable, ceph_nfs_disable_caching, that if set to true
disables ganesha's directory and attribute caching as much as
possible.
Also, disable caching done by ganesha, when 'nfs_file_gw'
variable is true, i.e., when Ganesha is used as CephFS's gateway.
This is the recommended Ganesha setting as libcephfs already caches
information. And doing so helps avoid cache incoherency issues
especially with clustered ganesha over CephFS.
Fixes: https://tracker.ceph.com/issues/23393
Signed-off-by: Ramana Raja <rraja@redhat.com>
If people keep on using the mon_cap, osd_cap etc the playbook will
translate this old syntax on the flight.
Signed-off-by: Sébastien Han <seb@redhat.com>
backward compatibility with `ceph_mon_docker_interface` and
`ceph_mon_docker_subnet` was not working since there wasn't lookup on
`monitor_interface` and `public_network`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this change, if a user had ceph-test-12.2.1 installed, and
upgraded to ceph v12.2.3 or newer, the RPM upgrade process would
fail.
The problem is that the ceph-test RPM did not depend on an exact version
of ceph-common until v12.2.3.
In Ceph v12.2.3, ceph-{osdomap,kvstore,monstore}-tool binaries moved
from ceph-test into ceph-base. When ceph-test is not yet up-to-date, Yum
encounters package conflicts between the older ceph-test and newer
ceph-base.
When all users have upgraded beyond Ceph < 12.2.3, this is no longer
relevant.
According to our recent change, we now use "CentOS" as a latest
container image. We need to reflect this on the ceph_uid.
Signed-off-by: Sébastien Han <seb@redhat.com>
Tripleo deployment failed when the monitors not manged
by tripleo itself with:
FAILED! => {"msg": "list object has no element 0"}
The failing play item was introduced by
f46217b69a .
fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1552327
Signed-off-by: Attila Fazekas <afazekas@redhat.com>
because of `serial: 1`, it can be an issue when the playbook is being
run on client nodes.
Since the refact of `ceph-client` we skip the role `ceph-defaults` on
every node except the first client node, it means that the task is not
going to be played because of `run_once: true`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts this role so we don't have to pull container image
on client nodes just to create pools and keys.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1550977
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This seems to be a leftover.
This commit removes an unnecessary 'set linux permissions' on
`/var/lib/ceph`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This check is alone in `ceph-docker-common` since a previous code
refactor.
Moving this check in `ceph-defaults` allows us to run `ceph-clients`
without having to run `ceph-docker-common` even in non-containerized
deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch, the certificates where being generated on a single
node only (because of the run_once: true). Thus certificates were not
distributed on all the gateway nodes.
This would require a second ansible run to work. This patches fix the
creation and keys's distribution on all the nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1540845
Signed-off-by: Sébastien Han <seb@redhat.com>
This update will resolve error['cephfs' is undefined.] in multimds container deployments.
See: roles/ceph-mon/tasks/create_mds_filesystems.yml. The same last two tasks are present there, and actully need to happen in that role since "{{ cephfs }}" gets defined in
roles/ceph-mon/defaults/main.yml, and not roles/ceph-mds/defaults/main.yml.
Signed-off-by: Randy J. Martinez <ramartin@redhat.com>
Copy the admin key when configured nfs_file_gw (but not nfs_obj_gw). Also,
copy/setup RGW related directories only when configured as nfs_obj_gw.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
This variable is needed for containerized clusters and is required for
the ceph-docker-common role. Typically the is_atomic variable is set in
site-docker.yml.sample though so if ceph-docker-common is used outside
of that playbook it needs set in another way. Moving the creation of
the variable inside this role means playbooks don't need to worry
about setting it.
fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1558252
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since the approach to creating a ceph.conf file has changed, and now
no-longer relies on assembling config file fragments in /etc/ceph/ceph.d
we can avoid the conf_overrides rendering on the local host and skip out
the tasks related to that, instead using just the config_template task
to configure the file directly.
Sébastien Han
Giulio Fidente
Guillaume Abrioux
Shilpa Jagannath
Vasu Kulkarni
George Shuklin
Ha Phan
Andy McCrae
Michel Rode
Christian Zunker
Patrick Donnelly
Konstantin Shalygin
Vishal Kanaujia
Andrew Schoen
jtudelag
Luigi Toscano
Subhachandra Chandra
Michael Vollman
Gregory Meno
Simone Caronni
Ramana Raja
Di Xu
Randy J. Martinez
Douglas Fuller
vasishta p shastry
Ali Maredia
Ken Dreyer
Zack Cerza
Attila Fazekas
Alfredo Deza
John Fulton
Ning Yao