When used along with delegate, run_once does not belong well. Thus,
using | last always brings the desired result.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now look for any excisting containers, if any we compare their
running image with the latest pulled container image.
For OSDs, we iterate over the list of running OSDs, this handles the
case where the first OSD of the list has been updated (runs the new
image) and not the others.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1526513
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we have a task to test the handlers we can test a new container to
validate the service restart on a new container image.
Signed-off-by: Sébastien Han <seb@redhat.com>
Variables set at the play level with ``vars`` do
not carry over into the next play in the playbook.
The var jewel_minor_update was set in a previous play but
used in this one and was failing because it was not defined.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1544029
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
These are better collected by ansible automatically. This would also
fail if the host_var file didn't exist.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Multipath disks have partitions with a different format than what
ceph-ansible currently supports, this update makes ceph-ansible
aware of that format so multipath disks can be used as OSDs
Signed-off-by: Caleb Boylan <caleb.boylan@ormuco.com>
Since Luminous we need to set the application tag for each pool,
otherwise a CEPH_WARNING is generated when the pools are in use.
We should assign the OpenStack pools to their default which would be
"rbd". When updating to Luminous this would happen automatically to the
vms, images, backups and volumes pools, but for new deploys this is not
the case.
Now by running the playbook like this:
ansible-playbook site.yml --tags='ceph_update_config'
You can only generate a ceph configuration file on the nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1543434
Signed-off-by: Sébastien Han <seb@redhat.com>
osd_scenario does not exist in the ceph-default role so if we try to
play ceph-default on an OSD node, the playbook will fail with undefined
variable.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit fixes a bug that occurs especially for dmcrypt scenarios.
There is an issue where the 'disk_list' container can't reach the ceph
cluster because it's not launched with `--net=host`.
If this container can't reach the cluster, it will hang on this step
(when trying to retrieve the dm-crypt key) :
```
+common_functions.sh:448: open_encrypted_part(): ceph --cluster abc12 --name \
client.osd-lockbox.9138767f-7445-49e0-baad-35e19adca8bb --keyring \
/var/lib/ceph/osd-lockbox/9138767f-7445-49e0-baad-35e19adca8bb/keyring \
config-key get dm-crypt/osd/9138767f-7445-49e0-baad-35e19adca8bb/luks
+common_functions.sh:452: open_encrypted_part(): base64 -d
+common_functions.sh:452: open_encrypted_part(): cryptsetup --key-file \
-luksOpen /dev/sdb1 9138767f-7445-49e0-baad-35e19adca8bb
```
It means the `ceph-run-osd.sh` script won't be able to start the
`osd_disk_activate` process in ceph-container because he won't have
filled the `$DOCKER_ENV` environment variable properly.
Adding `--net=host` to the 'disk_list' container fixes this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1543284
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
While hostname -f will always return an hostname including its
domain part and -s without the domain part, the behavior when
no arguments are given can include or not include the domain part
depending on how the system is configured; the socket name might
not match the instance name then.
Was called too early, container was not yet started so the commands failed.
Moved the section after include docker/main.yml
Signed-off-by: Greg Charot <gcharot@redhat.com>
the `zap ceph osd disks` task should iter on `resolved_parent_device`
instead of `combined_devices_list` which contain only the base device
name (vs. full path name in `combined_devices_list`).
this fixes the issue where docker complain about container name because
of illegal characters such as `/` :
```
"/usr/bin/docker-current: Error response from daemon: Invalid container
name (ceph-osd-zap-magna074-/dev/sdb1), only [a-zA-Z0-9][a-zA-Z0-9_.-]
are allowed.","See '/usr/bin/docker-current run --help'."
""
```
having the the basename of the device path is enough for the container
name.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1540137
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With two public networks configured - we found that with
"NETWORK_ADDR_1, NETWORK_ADDR_2" install process consistently became
broken, trying to find docker registry on second network, and not
finding mon container.
but without spaces
"NETWORK_ADDR_1,NETWORK_ADDR_2" install succeeds
so, containerized install is more peculiar with formatting of this line
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1534003
Signed-off-by: Sébastien Han <seb@redhat.com>
This is a typo caused by leftover.
It was previously written like this :
`shell: echo /dev/$(lsblk -no pkname "{{ item }}") }}")`
and has been rewritten to :
`shell: $(lsblk --nodeps -no pkname "{{ item }}") }}")`
because we are appending later the '/dev/' in the next task.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1540137
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Description of problem: The 'get osd id' task goes through all the 10 times (and its respective timeouts) to make sure that the number of OSDs in the osd directory match the number of devices.
This happens always, regardless if the setup and deployment is correct.
Version-Release number of selected component (if applicable): Surely the latest. But any ceph-ansible version that contains ceph-volume support is affected.
How reproducible: 100%
Steps to Reproduce:
1. Use ceph-volume (LVM) to deploy OSDs
2. Avoid using anything in the 'devices' section
3. Deploy the cluster
Actual results:
TASK [ceph-osd : get osd id _uses_shell=True, _raw_params=ls /var/lib/ceph/osd/ | sed 's/.*-//'] **********************************************************************************************************************************************
task path: /Users/alfredo/python/upstream/ceph/src/ceph-volume/ceph_volume/tests/functional/lvm/.tox/xenial-filestore-dmcrypt/tmp/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:6
FAILED - RETRYING: get osd id (10 retries left).
FAILED - RETRYING: get osd id (9 retries left).
FAILED - RETRYING: get osd id (8 retries left).
FAILED - RETRYING: get osd id (7 retries left).
FAILED - RETRYING: get osd id (6 retries left).
FAILED - RETRYING: get osd id (5 retries left).
FAILED - RETRYING: get osd id (4 retries left).
FAILED - RETRYING: get osd id (3 retries left).
FAILED - RETRYING: get osd id (2 retries left).
FAILED - RETRYING: get osd id (1 retries left).
ok: [osd0] => {
"attempts": 10,
"changed": false,
"cmd": "ls /var/lib/ceph/osd/ | sed 's/.*-//'",
"delta": "0:00:00.002717",
"end": "2018-01-21 18:10:31.237933",
"failed": true,
"failed_when_result": false,
"rc": 0,
"start": "2018-01-21 18:10:31.235216"
}
STDOUT:
0
1
2
Expected results:
There aren't any (or just a few) timeouts while the OSDs are found
Additional info:
This is happening because the check is mapping the number of "devices" defined for ceph-disk (in this case it would be 0) to match the number of OSDs found.
Basically this line:
until: osd_id.stdout_lines|length == devices|unique|length
Means in this 2 OSD case it is trying to ensure the following incorrect condition:
until: 2 == 0
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1537103
This should default to False. The default for Keystone is not to use PKI
keys, additionally, anybody using this setting had to have been manually
setting it before.
Fixes: #2111
This allows us to use host-specific variables in ceph_conf_overrides variable. For example, this fixes usage of such variables (e.g. 'nss db path' having {{ ansible_hostname }} inside) in ceph_conf_overrides for rados gateway configuration (see profiles/rgw-keystone-v3) - issue #2157.
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
These tasks are needed only when upgrading to luminous.
They are not needed in Jewel minor upgrade and by the way, they fail because
`ceph versions` command doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Sometime the playbook gets stuck because even with `--connect-timeout=`
option, the connexion to the existing ceph cluster never timeout.
As a workaround, using `timeout` command provided by coreutils will
actually timeout if we can't connect to the cluster.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1537003
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We noticed that sometime, ceph-ansible can fail with error :
`Failed to connect to the host via ssh:`
It can occurs after the task `restart firewalld` has been played.
Setting `retries` to 5 should prevent from unexcepted ssh failure.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is to keep backward compatibility with stable-2.2 and satisfy the
check "verify dedicated devices have been provided" in
`check_mandatory_vars.yml`. This check is looking for
`dedicated_devices` so we need to default it's value to
`raw_journal_devices` when `raw_multi_journal` is set to `True`.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1536098
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The --crush-device-class flag for ceph-volume is not available in luminous so lets
remove this testing option for now until it's more widely available.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Some systems that were deployed with old tools can leave units named
"ceph-radosgw@radosgw.gateway.service". As a consequence, they will
prevent the new unit to start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1509584
Signed-off-by: Sébastien Han <seb@redhat.com>
When update from a minor Jewel version to another, the playbook will
fail on the task "fail if no mgr host is present in the inventory".
This now can be worked around by running Ansible with_items
-e jewel_minor_update=true
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1535382
Signed-off-by: Sébastien Han <seb@redhat.com>
Using `lsblk` to resolv the parent device is better than just removing the last
char when passing it to the zap container.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Avoid using `awk` to get the different devices from the partlabel.
Using `blkid` is more readable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With this change, "make srpm" will generate an RPM with "beta" in the
Release value.
For example, "v3.2.0beta1" will create
"ceph-ansible-3.2.0-0.beta1.1.el7.src.rpm"
Currently, we can define crush location for each host but only crush roots and crush rules are created. This commit automates other routines for a complete solution:
1) Creates rack type crush buckets defined in {{ ceph_crush_rack }} of each osd host. If it's not defined by user then a rack named 'default_rack_{{ ceph_crush_root }}' would be added and used in next steps.
2) Move rack type crush buckets defined in {{ ceph_crush_rack }} into crush roots defined in {{ ceph_crush_root }} of each osd host.
3) Move hosts defined in {{ ceph_crush_rack }} into crush roots defined in {{ ceph_crush_root }} of each osd host.
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
On a non-collocated scenario, if a drive is faulty we can't really
remove it from the list of 'devices' without messing up or having to
re-arrange the order of the 'dedicated_devices'. We want to keep this
device list ordered. This will prevent the activation failing on a
device that we know is failing but we can't remove it yet to not mess up
the dedicated_devices mapping with devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
Having handlers in both ceph-defaults and ceph-docker-common roles can make the
playbook restarting two times services. Handlers can be triggered first
time because of a change in ceph.conf and a second time because a new
image has been pulled.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This wasn't any good choice to implement this.
We had several options and none of them were ideal since handlers can
not be triggered cross-roles.
We could have achieved that by doing:
* option 1 was to add a dependancy in the meta of the ceph-docker-common
role. We had that long ago and we decided to stop so everything is
managed via site.yml
* option 2 was to import files from another role. This is messy and we
don't that anywhere in the current code base. We will continue to do so.
There is option 3 where we pull the image from the ceph-config role.
This is not suitable as well since the docker command won't be available
unless you run Atomic distro. This would also mean that you're trying to
pull twice. First time in ceph-config, second time in ceph-docker-common
The only option I came up with was to duplicate a bit of the ceph-config
handlers code.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1526513
Signed-off-by: Sébastien Han <seb@redhat.com>
When containerized deployment, `docker_exec_cmd` is not set before the
task which try to retrieve the current fsid is played, it means it
considers there is no existing fsid and try to generate a new one.
Typical error:
```
ok: [mon0 -> mon0] => {
"changed": false,
"cmd": [
"ceph",
"--connect-timeout",
"3",
"--cluster",
"test",
"fsid"
],
"delta": "0:00:00.179909",
"end": "2018-01-09 10:36:58.759846",
"failed": false,
"failed_when_result": false,
"rc": 1,
"start": "2018-01-09 10:36:58.579937"
}
STDERR:
Error initializing cluster client: Error('error calling conf_read_file: errno EINVAL',)
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Previously we were using ceph_conf_overrides however this doesn't play
nice for softwares like TripleO that uses ceph_conf_overrides inside its
own code. For now, and since this is the only occurence of this, we can
ensure no logs through the ceph conf template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1532619
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Andrew Schoen
Caleb Boylan
Andy McCrae
Guillaume Abrioux
Grant
Giulio Fidente
Greg Charot
Eduard Egorov
Ken Dreyer