We need to set the mgr dashboard server ip address before restarting the
dashboard module otherwise we can try to bind the dashboard module on an
already used address.
We already do this configuration for the dashboard port value and ssl
setup so we should do the same for server address too.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851455
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 03cd75845f)
The use of "| success" and "| changed" are not valid syntax for modern
ansible releases.
Signed-off-by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
(cherry picked from commit 42884e8175)
This is now a dependancy of ceph-mgr so will be installed automatically
and does not need a specific task.
This change means that ceph-mgr installs correctly on Ubuntu Focal where
the python3-routes package is necessary.
Signed-off-by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
(cherry picked from commit 92288c11c5)
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d43769dc2a)
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 829990e60d)
This commit makes the playbook copying self-signed generated certificate
to monitors.
When mons and mgrs are deployed on dedicated nodes the playbook will
fail when trying to import certificate and key files since they are
generated on mgrs whereas we try to import them from a monitor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b7539eb275)
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd22f1d1ec)
We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b91d60d384)
When a container image managed by podman isn't tag anymore then the
RepoDigests field when inspecting the image doesn't return any value.
This is different from docker workflow and it breaks the ceph-ansible
container upgrade when collocated multiple services and using a non
fix container tag (like latest or 4).
$ podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 957 MB
<none> <none> 011ee108bfc9 2 months ago 1.01 GB
$ podman inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:20cf789235e23ddaf38e109b391d1496bb88011239d16862c4c106d0e05fea9e"
$ podman inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
null
Because this field returns "null" then the ansible task trying to
determine this value is failing
-----------------------------
fatal: [foo]: FAILED! =>
msg: |-
The task includes an option with an undefined variable. The error
was: None has no element 0
The error appears to be in
'roles/ceph-container-common/tasks/fetch_image.yml': line 137,
column 3, but may be elsewhere in the file depending on the exact
syntax problem.
The offending line appears to be:
- name: set_fact ceph_osd_image_repodigest_before_pulling
^ here
-----------------------------
We don't have this behaviour with docker.
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 928 MB
docker.io/ceph/daemon <none> 011ee108bfc9 2 months ago 986 MB
$ docker inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:45e6f28bb67c81b826acb64fad5c0da1cac3dffb41a88992fe4ca2be79575fa6"
$ docker inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:b393a73309d72e43ca7d65cd3519036007947671e373eb59aa75a46185c52231"
Instead we should just get the Id field.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1844496
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cdb30bd125)
We were only adding the endpoints to the master zone but not to the
zonegroup.
This patch fixes the issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1839228
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 0175c205fa)
The vrrp_instances variable is using a loop with index but the index_var
wasn't defined.
As a result, the fact task was failing on this undefined index variable.
The task includes an option with an undefined variable. The error was:
'index' is undefined
Closes: #5395
Signed-off-by: Florian Faltermeier <florian.faltermeier@uibk.ac.at>
(cherry picked from commit 3f906e0c26)
This commits calls the `ceph_pool` module for creating ceph pools
everywhere it's needed in the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit af9f6684f2)
When using the stable nfs ganesha repository, we need have both arch
and noarch repositories enabled.
Currently the noarch repository is missing which cause the non
containerized deployment to fail.
Closes: #5375
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 44e1ebaaff)
The condition on this task is wrong, we have to check whether
`target_size_ratio` is set in the pool definition instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8c7a48832c)
always set these facts on monitor nodes whatever we run with `--limit`.
Otherwise, playbook will fail when using `--limit` on nodes where these
facts are used on a delegated task to monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e5e81843e9)
The current ganesha log directory is only present in the container
and not bind mount on the host.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 222fe4abd8)
When using an untrusted TLS certificate (like self-signed) on grafana
then the grafana dashboards update subcommand will fail.
One solution could be to trust the TLS certificate.
The other one is to disable the TLS verification on the grafana API.
Closes: #5324
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b20519efd0)
The dashboard nodes (alertmanager, grafana, node-exporter, and prometheus)
were not manage during the docker to podman migration.
This adds the systemd container template of those services to a dedicated
file (systemd.yml) in order to include it in the docker2podman playbook.
This also adds the dashboard container images pull from docker to podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829389
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 252e78b4e4)
Same fix as `ceph-rgw` for `rgw_create_pools` pool names that contain Jinja
templates.
See #5348 for details.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 444b46ea24)
It is common to set templated pool names in `rgw_create_pools`, e.g.
```yaml
rgw_create_pools:
"{{ rgw_zone }}.rgw.buckets.index":
pg_num: 16
size: 3
type: replicated
```
This worked fine with Ansible 2.8, but broke in Ansible 2.9 due to a change in
the way `with_dict` works [1].
This commit replaces the use of `with_dict` with
```yaml
loop: "{{ rgw_create_pools | dict2items }}"
```
which works as intended and expands the template in the pool name.
[1]: https://docs.ansible.com/ansible/latest/porting_guides/porting_guide_2.9.html#loopsCloses#5348
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit d2b7670c7d)
The `dashboard_enabled` condition used a `true` filter (which doesn't exist)
instead of the `bool` filter.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit b7efca1785)
The '==' jinja2 operator (or 'equalto') has been introduced in jinja2
2.8.
On EL7, jinja2 version is 2.7 so the operator isn't present creating
templating error like:
The error was: TemplateRuntimeError: no test named '=='
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1747206
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34e6e8e06c)
Since ea2b654d9 we're not running the rados command from the monitor
nodes but from the ganesha node. Unfortunately we don't have the
required keyring on that node to run the rados command as we don't
import the right keyring.
This commit restores the workflow for internal ganesha deployment like
before ea2b654d9 but keeps the rados commands from the ganesha node for
external deployment until we have a better design.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8a890306ad)
Fix the condition on the keyring copy task that prevent the ganesha
keyring to be created in the /var/lib/ceph directory.
Also ensure that the directory exists first.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 748ac4b928)
The condition is missing an index here which makes the playbook failing.
Typical error:
```
The conditional check 'not item.get('skipped', False)' failed. The error was: error while evaluating conditional (not item.get('skipped', False)): 'list object' has no attribute 'get'",
```
Also, adds the missing '/keyring' on the `exec_cmd_nfs` fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831342
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cf460274c7)
When using radosgw_interface and IPv6 setup then the _radosgw_address
fact doesn't use square brackets compared to the radosgw_address and
radosgw_address_block configuration.
Closes: #5325
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ed4f23d530)
This change allows the operator to refresh the
ceph dashboard admin role on multiple ceph-ansible
executions.
In the current state the role is set only when the
user is created, and there's no way to change it if
the user exists.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1826002
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 5eb363e033)
15ed9ee introduced a regression for the mgr dashboard daemon using
IPv6 since the mgr dashboard configuration doesn't support brackets.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1827299
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f1728929cd)
The CentOS 7 distribution could still be used be deploying ceph if
- it's a containerized deployment
- it's a non containerized deployment without the dashboard (due to
missing python3 libraries).
The ceph_stable_redhat_distro variable has been remove because we can
rely on the ansible_distribution_major_version fact instead.
The copr el8 repository configuration is only applied for CentOS 8.
The ceph-mgr-dashboard package is only installed when the
dashboard_enabled variable is set to true.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2547ab601a)
this commit removes the task which enable application on cephfs pools.
See: https://tracker.ceph.com/issues/43761Fixes: #5278
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 86dc6f8206)
This was removed in Ansible 2.9.
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|version_compare` use `result is version_compare`. This
feature will be removed in version 2.9. Deprecation warnings can be
disabled by setting deprecation_warnings=False in ansible.cfg.
Rename 'version_compare' to the function 'version'.
version_compose was renamed to version since ansible 2.5
Signed-off-by: abaird-rh <abaird@redhat.com>
(cherry picked from commit eb71244bfd)
This commit creates an empty rados index object even when deploying
standalone nfs-ganesha.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822328
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ea2b654d95)
This is needed to get a TLS certificate to validate correctly.
If unspecified, auto-detected grafana_server_addr is used.
Signed-off-by: Paulo Matias <matias@ufscar.br>
(cherry picked from commit 38ce02c2ea)
Trying to access these APIs through TLS produces "Could not reach
external API" errors in Ceph dashboard.
Signed-off-by: Paulo Matias <matias@ufscar.br>
(cherry picked from commit dac8e1d0a9)
This commit fixes a bug when trying to scale out osd nodes with
`crush_rule_config` is enabled.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822599
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4bcc52cb2a)
We were not testing the right ansible_distribution fact value for RHEL
distribution.
This commit also updates the minial RHEL version supported by RHCS.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5de74fe512)
The dashboard SSO mgr module requires the saml python library to be
installed. This is only a valid scenario for RHCS deployment because
the saml python library isn't available in other classic repositories.
This package is present in RHCS Tools repository so we also need to
enable it on the mgr nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1820233
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 6617d90733)
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1bb9860dfd)
Creating crush rules even with no crush hierarchy configuration is a
valid scenario so we shouldn't be bound to the first task result (which
configure crush hierarchy) to be able to add new crush rules.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816989
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5b0476385c)
as of V3.2 / octopus, the url has changed.
This commit updates the url in the playbook accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In master, even though we are using dev repo, the value here should be closer
from the last stable released.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds el8 repo configuration since we are still missing these
packages in el8.
This is only intended to make CI passing on stable-5.0 and *must* be
reverted once these packages will be available.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since Ceph Octopus is python3 only we don't need to specify the max open
files anymore with the container engine.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 64701437de)
Support for debian with RHCS has been dropped starting RHCS 4
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4ac99223b2)
RHCS 5 will be based on Ceph Octopus release and only supported on
RHEL 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 90ad110861)
This is no longer true, let's remove this comment given that this option
is not ignored in containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e551b5ba1a)
The rgw_instances_all fact is supposed to be the list of all radosgw
instances from all rgw nodes.
But the fact is always using the local rgw_instances variable so this
won't work on multiple nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0487d21938)
This commit allows one to set the role for the admin user as read-only.
This can be controlled via the dashboard_admin_user_ro variable but the
default value is false for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1810176
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't use the registry name when using the community dashboard
container images (grafana, prometheus, alertmanager & node exporter).
This commit adds the docker.io registry explicitly in the default
dashboard container image name values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since 8e8aa73 we're using grafana 5.4.3 in RHCS 4.1 via [1].
We should also update the grafana container tag from docker.io when
using the community release.
[1] registry.redhat.io/rhceph/rhceph-4-dashboard-rhel8:4
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This option has been deprecated (As of 0.51).
By the way, ceph-ansible already sets the
auth_{service,client,cluster}_required variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using the radosgw multi instances configuration then the firewall
rules aren't adapted to that setup.
We only open the port according to the radosgw_frontend_port variable
so only the first radosgw instance port will be opened in the firewall
configuration.
We should instead iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we can't use osd pool without replicas (size: 1) by default.
We now need to set the mon_allow_pool_size_one flag to true in the ceph
configuration and add the --yes-i-really-mean-it flag to the osd pool
set size cli.
[1] https://github.com/ceph/ceph/commit/21508bd
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit make that task retrying 5 times to start the service
firewalld to avoid failure like following:
```
TASK [ceph-infra : start firewalld] ********************************************
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-centos-container-purge/roles/ceph-infra/tasks/configure_firewall.yml:22
Monday 09 March 2020 08:58:48 +0000 (0:00:00.963) 0:02:16.457 **********
fatal: [osd4]: FAILED! => changed=false
msg: |-
Unable to enable service firewalld: Created symlink from /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service to /usr/lib/systemd/system/firewalld.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/firewalld.service to /usr/lib/systemd/system/firewalld.service.
Failed to execute operation: Connection reset by peer
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of volumes as a static string the openstack_cinder_pool.name
variable should be used as with the other keys.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
Sometimes, these task can timeout for some reason.
Adding these retries can help to avoid unexcepted failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to run this part of the role when upgrading clients
node. Let's skip it when rolling_update.yml is being run.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
This commit adds condition in order to not try to customize pools size
when its type is erasure.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the pg autoscaler support.
The structure for pool definition has now two additional attributes
`pg_autoscale_mode` and `target_size_ratio`, eg:
```
test:
name: "test"
pg_num: "{{ osd_pool_default_pg_num }}"
pgp_num: "{{ osd_pool_default_pg_num }}"
rule_name: "replicated_rule"
application: "rbd"
type: 1
erasure_profile: ""
expected_num_objects: ""
size: "{{ osd_pool_default_size }}"
min_size: "{{ osd_pool_default_min_size }}"
pg_autoscale_mode: False
target_size_ratio": 0.1
```
when `pg_autoscale_mode` is `True` user has to set a decent value in
`target_size_ratio`.
Given that it's a new feature, it's still disabled by default.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1782253
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently, the command executed is wrong, eg:
```
cmd:
- podman
- exec
- ceph-mon-controller-0
- ceph
- --cluster
- ceph
- osd
- pool
- create
- volumes
- '32'
- '32'
- replicated_rule
- '1'
delta: '0:00:01.625525'
end: '2020-02-27 16:41:05.232705'
item:
```
From documentation, the osd pool creation command is :
```
ceph osd pool create {pool-name} {pg-num} [{pgp-num}] [replicated] \
[crush-rule-name] [expected-num-objects]
ceph osd pool create {pool-name} {pg-num} {pgp-num} erasure \
[erasure-code-profile] [crush-rule-name] [expected_num_objects]
```
it means we pass '1' (from item.type) as value for
`expected_num_objects` by default which is very likely not what we want.
Also, this commit modifies the default value when no `rule_name` is set
to use the existing variable `osd_pool_default_crush_rule`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1808495
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the user provides manually the key value for a specific keyring then
there's not valation on the content which could lead to unexpected
failures in the ceph_key module.
Closes: #5104
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the firewalld ansible module we need to be sure that the
python bindings are installed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since ansible 2.9 the firewalld task could not be used with service and
source in the same time anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running environment with OSDs having ID with more than 2 digits,
some tasks don't match the system units and therefore, playbook can fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1805643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This change introduces a new set of tasks to configure the
ceph dashboard backend and listen just on the mgr related
subnet (and not on '*'). For the same reason the proper
server address is added in both prometheus and alertmanger
systemd units.
This patch also adds the "dashboard_frontend_vip" parameter
to make sure we're able to support the HA model when multiple
grafana instances are deployed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792230
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
Since [1] if a rgw user already exists then the radosgw-admin user create
command will return an error instead of modifying the current user.
We were already doing separated tasks for create and get operation but
only for multisite configuration but it's not enough.
Instead we should do the get task first and depending on the result
execute the create.
This commit also adds missing run_once and delegate_to statement.
[1] https://github.com/ceph/ceph/commit/269e9b9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Allow SSL certificate & key contents to be written to the path
specified by radosgw_frontend_ssl_certificate. This permits a
certificate to be deployed & renewal of expired certificates
through ceph-ansible.
Signed-off-by: Sam Choraria <sam.choraria@bbc.co.uk>
The ad7a5da commit introduced a regression when using TLS on haproxy
via the haproxy_frontend_ssl_certificate variable.
This cause the "stats socket" and the "tune.ssl.default-dh-param"
parameters to be on the same line resulting haproxy failing to start.
[ALERT] 351/140240 (21388) : parsing [xxxxx] : 'stats socket' : unknown
keyword 'tune.ssl.default-dh-param'. Registered
[ALERT] 351/140240 (21388) : Fatal errors found in configuration.
Fixes: #4869
Signed-off-by: Florian Faltermeier <florian.faltermeier@uibk.ac.at>
The rgw user creation for the Ceph dashboard integration shouldn't be
created on secondary rgw zones.
Closes: #4707
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794351
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Client configuration with --limit fails without this patch
because certain tasks are only done to the first host in the
_filtered_clients list and it's likely that first host will
not be included in what's sepcified with --limit. To fix this
the _filtered_clients list should be built from all clients
in the inventory that are also in the running play.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798781
Signed-off-by: John Fulton <fulton@redhat.com>
Using ceph_dev_branch and ceph_dev_sha1 for configuring ceph-iscsi
repositories from shaman doesn't make sense because the ceph devel
branches and sha1 aren't compatible with ceph-iscsi devel.
Instead we could rely on the master branch and the latest sha1.
Currently it's not possible to using a custom ceph branch/sha1 value
with iscsi setup otherwise the repository setup will fail.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph_nfs_ceph_user variable is a string for the ceph-nfs role but a
list in ceph-client role.
6a6785b introduced a confusion between both variable type in the ceph-nfs
role for external ceph with ganesha.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1801319
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since ed36a11 we move the crush rules creation code from the ceph-mon to
the ceph-osd role.
To keep the backward compatibility we kept the possibility to set the
crush variables on the mons side but we didn't move the default values.
As a result, when using crush_rule_config set to true and wanted to use
the default values for crush_rules then the crush rule ansible task
creation will fail.
"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute
'crush_rules'"
This patch move the default crush variables from ceph-mon to ceph-osd
role but also use those default values when nothing is defined on the
mons side.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798864
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The grafana_{crt,key} aren't boolean variables but strings. The default
value is an empty string so we should do the conditional on the string
length instead of the bool filter
Closes: #5053
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using multiple grafana hosts then we push set the grafana and
prometheus URL and push the dashboard layout to a single node.
grafana_server_addrs is the list of all grafana nodes and used during
the ceph-dashboard role (on mgr/mon nodes).
grafana_server_addr is the current grafana node used during the
ceph-grafana and ceph-prometheus role (on grafana-server nodes).
We don't have the grafana_server_addr fact duplication code between
external vs collocated nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1784011
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit increases the default values for the following variable
consumed in switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook.
This also moves these variables in `ceph-defaults` role so the user can
set different values if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783223
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This was used before the CentOS 8 requirement when using CentOS 7
atomic which has both docker and podman installed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
During a rolling update we will run the ceph iscsigw tasks that start
the daemons then run the configure_iscsi.yml tasks which can create
iscsi objects like targets, disks, clients, etc. The problem is that
once the daemons are started they will accept confifguration requests,
or may want to update the system themself. Those operations can then
conflict with the configure_iscsi.yml tasks that setup objects and we
can end up in crashes due to the kernel being in a unsupported state.
This could also happen during creation, but is less likely due to no
objects being setup yet, so there are no watchers or users accessing the
gws yet. The fix in this patch works for both update and initial setup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1795806
Signed-off-by: Mike Christie <mchristi@redhat.com>
RHCS 4 is available for both RHEL 7 and 8 so we should also enable the
cdn repositories for that distribution.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1796853
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When no monitor group is present in the inventory, this task fails.
This affects only non-containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since de8f2a9 the lvm2 package installation has been moved from ceph-osd
role to ceph-container-engine role.
But the scope wasn't limited to the OSD nodes only.
This commit fixes this behaviour.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The [rgw] section in the ceph.conf file or via the ceph_conf_overrides
variable doesn't exist and has no effect.
To apply overrides to all radosgw instances we should use either the
[global] or [client] sections.
Overrides per radosgw instance should still use the
[client.rgw.{instance-name}] section.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794552
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds a task to make sure user set a custom password for
`grafana_admin_password` and `dashboard_admin_password` variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1795509
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using different name between the inventory_hostname and the
ansible_hostname then the _container_exec_cmd fact will get a wrong
value based on the inventory_hostname instead of the ansible_hostname.
This happens when the ceph cluster is already running (update/upgrade).
Later the container exec commands will fail because the container name
is wrong.
We should always set the _container_exec_cmd based on the
ansible_hostname fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1795792
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We must call `container_exec_cmd` from the right monitor node otherwise
the value of the fact might mistmatch between the delegated node and the
node being played.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794900
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some ganesha packages do not create ganesha log directories
while it's expected to be created while changing it's permissions.
Additionally it's no much sense in doing that as a separate task,
so directory is created as correct permissions are set with creation of
the rest required directories.
Signed-off-by: Dmitriy Rabotyagov <drabotyagov@vexxhost.com>
Given that we delegate to the first monitor, we must read the value of
`container_exec_cmd` from this node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Because we need to manage legacy ceph-disk based OSD with ceph-volume
then we need a way to know the osd_objectstore in the container.
This was done like this previously with ceph-disk so we should also
do it with ceph-volume.
Note that this won't have any impact for ceph-volume lvm based OSD.
Rename docker_env_args fact to container_env_args and move the container
condition on the include_tasks call.
Remove OSD_DMCRYPT env variable from the ceph-osd template because it's
now included in the container_env_args variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792122
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In 3c31b19ab3, I fixed the `customize pool
size` task by replacing `item.size` with `item.value.size`. However, I
missed the same issue in the `when` condition.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
When unsetting the noup flag, we must call container_exec_cmd from the
delegated node (first mon member)
Also, adding a `run_once: true` because this task needs to be run only 1
time.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to define a variable via a fact if we can do it via a
default value. Using a fact could be interesseting to override the
default value on some condition.
- ceph_uid could be set to 167 by default because it's only different on
non containerized deployment on Debian/Ubuntu.
- rbd_client_directory_{owner,group,mode} could be set to ceph,ceph,0770
by default install of null as we are doing in the facts.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Iterating over all monitors in order to delegate a `
{{ container_binary }}` fails when collocating mgrs with mons, because
ceph-facts reset `container_exec_cmd` to point to the first member of
the monitor group.
The idea is to force `container_exec_cmd` to be reset in ceph-mgr.
This commit also removes the `container_exec_cmd_mgr` fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1791282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The trusted_ip_list parameter for the rbd-target-api service doesn't
support ipv6 address with bracket.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to executed the grafana fact everytime but only during
the dashboard deployment.
Especially for ceph-grafana, ceph-prometheus and ceph-dashboard roles.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790303
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit refact the condition in the loop of that task so all
potential osd ids found are well started.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790212
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
411bd07d54 introduced a bug in handlers
using `handler_*_status` instead of `hostvars[item]['handler_*_status']`
causes handlers to be triggered in anycase even though
`handler_*_status` was set to `False` on a specific node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Only the ipv4 addresses from the nodes running the dashboard mgr module
were added to the trusted_ip_list configuration file on the iscsigws
nodes.
This also add the iscsi gateways with ipv6 configuration to the ceph
dashboard.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
that task is delegated on the first mon so we should always use the
`discovered_interpreter_python` from that node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The rtslib python library is now available in the distribution so we
shouldn't have to use the shaman repository
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since RHEL 8.1 we need to add the ganesha_t type to the permissive
SELinux list.
Otherwise the nfs-ganesha service won't start.
This was done on RHEL 7 previously and part of the nfs-ganesha-selinux
package on RHEL 8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786110
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Before this patch, the lvm2 package installation was done during the
ceph-osd role.
However we were running ceph-volume command in the ceph-config role
before ceph-osd. If lvm2 wasn't installed then the ceph-volume command
fails:
error checking path "/run/lock/lvm": stat /run/lock/lvm: no such file or
directory
This wasn't visible before because lvm2 was automatically installed as
docker dependency but it's not the same for podman on CentOS 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since we don't have nfs-ganesha builds available on CentOS 8 at the
moment on shaman then we can use the alternative repository at [1]
[1] https://download.nfs-ganesha.org/3/LATEST/CentOS
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently the keepalived template only works when system hostnames exactly match the Ansible inventory name. If these are different, all generated templates become BACKUP without a MASTER assigned. Using the inventory_hostname in the template file resolves this issue.
Signed-off-by: Stanley Lam stanleylam_604@hotmail.com
The grafana-server group name was hardcoded for the grafana/prometheus
firewalld tasks condition.
We should we the associated variable : grafana_server_group_name
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using multiple dashboard_enabled condition in the
configure_firewall file we could just have the condition once
and include the dedicated tasks list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When there's no mgr group defined in the ansible inventory then the
mgrs are deployed implicitly on the mons nodes.
If the dashboard is enabled then we need to open the dashboard port on
the node that is running the ceph mgr process (mgr or mon).
The current code only allow to open that port on the mgr nodes when they
are present explicitly in the inventory but not implicitly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783520
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Fixes: #4827
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to set the use_new_ceph_iscsi fact on other nodes than
those present in the iscsigws group.
Also remove the duplicate iscsi_gw_group_name condition already present
on the include_task.
Finally validate the ansible distribution as the first task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit isolates and adds an explicit comment about variables not
intended to be modified by the user.
Fixes: #4828
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Typical error:
```
type=AVC msg=audit(1575367499.582:3210): avc: denied { search } for pid=26680 comm="node_exporter" name="1" dev="proc" ino=11528 scontext=system_u:system_r:container_t:s0:c100,c1014 tcontext=system_u:system_r:init_t:s0 tclass=dir permissive=0
```
node_exporter needs to be run as privileged to avoid avc denied error
since it gathers lot of information on the host.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1762168
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It doesn't make sense to start validating configuration if the ansible
version isn't the good one.
This commit moves the check_system task as the first task in the
ceph-validate role.
The ansible version test tasks are moved at the top of this file.
Also moving the iscsi kernel tests from check_system to check_iscsi
file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ntp/chrony facts are only used in the ceph-infra role so we don't
really need to set them in the ceph-facts roles.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
A recent change in ceph/ceph prevent from having username in the
password:
`Error EINVAL: Password cannot contain username.`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The md devices (RAID software) aren't excluded from the devices list in
the auto discovery scenario.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1764601
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the shortname, the URL for active alert launches with short
hostname and fails to connect to the server.
This commit changes the template in order to use the fqdn.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1765485
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
All containers are removed when systemd stops them.
There is no need to call this module in purge container playbook.
This commit also removes all docker_image task and remove all container
images in the final cleanup play.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1776736
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed to avoid following error:
```
ERROR! The requested handler 'restart ceph mons' was not found in either the main handlers list nor in the listening handlers list
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1777829
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using `osd_auto_discovery`, `devices` is built multiple times due
to multiple runs of `ceph-facts` role. It end up with duplicate
instances of a same device in the list.
Using `unique` filter when building the list fixes this issue.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit makes the ceph-dashboard role only printing ceph-dashboard
URL of the nodes present in grafana-server group
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1762163
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The wait_for ansible module doesn't support the backets on IPv6 address
so need to remove them.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1769710
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this file is provided by the packaging (nfs-ganesha) so there's no need
to maintain it in ceph-ansible
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
At the moment, we bindmount the dbus socket from the host, this requires
to run the container with --privileged.
Since we now run a dedicated dbus daemon inside the same container, we
can stop running privileged nfs-ganesha containers
Related ceph-container PR : ceph/ceph-container#1517
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1725254
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Configuration of cephfs with an existing cluster using --limit used to fail
at different tasks while running with site-docker.yml
This commit addresses both of those tasks
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1773489
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636508
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In addition to the grafana container tag change, we need to do the same
for the prometheus container stack based on the release present in the
OSE 4.1 container image.
$ docker run --rm openshift4/ose-prometheus-node-exporter:v4.1 --version
node_exporter, version 0.17.0
build user: root@67fee13ed48f
build date: 20191023-14:38:12
go version: go1.11.13
$ docker run --rm openshift4/ose-prometheus-alertmanager:4.1 --version
alertmanager, version 0.16.2
build user: root@70b79a3f29b6
build date: 20191023-14:57:30
go version: go1.11.13
$ docker run --rm openshift4/ose-prometheus:4.1 --version
prometheus, version 2.7.2
build user: root@12da054778a3
build date: 20191023-14:39:36
go version: go1.11.13
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This will prevent failure of site-docker.yml with configs in doc.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1769760
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
When ceph_rbd_mirror_configure is set to true we need to ensure that
the required variables aren't empty.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1760553
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If for some reason, there's an old rgw socket file present in the
/var/run/ceph/ directory then the test command could fail with
test: xxxxxxxxx.asok: binary operator expected
$ ls -hl /var/run/ceph/
total 0
srwxr-xr-x. ceph-client.rgw.rgw0.rgw0.68.94153614631472.asok
srwxr-xr-x. ceph-client.rgw.rgw0.rgw0.68.94240997655088.asok
We can check the radosgw socket in /proc/net/unix to avoid using wildcard
in the socket name.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
[1] introduced a regression on the fs.aio-max-nr sysctl value condition.
The enable key isn't a boolean but a string because the expression isn't
evaluated.
This string output "(osd_objectstore == 'bluestore')" is always true
because item.enable condition only matches non empty string. So the
sysctl value was applyied for both filestore and bluestore backend.
[2] added the bool filter to the condition but the filter always returns
false on string and the sysctl wasn't applyed at all.
This commit fixes the enable key value by evaluating the value instead
of using the string.
[1] https://github.com/ceph/ceph-ansible/commit/08a2b58
[2] https://github.com/ceph/ceph-ansible/commit/ab54fe2
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The latest grafana container tag is using grafana 6.x release which could
cause issue with the ceph dashboard integration.
Considering that the grafana container in RHCS 3 is based on 5.x then we
should use the same version.
$ docker run --rm rhceph/rhceph-3-dashboard-rhel7:3 -v
Version 5.2.4 (commit: unknown-dev)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Even if this improves ceph-disk/ceph-volume performances then it also
impact the ceph-osd process.
The ceph-osd process shouldn't use 1024:4096 value for the max open
files.
Removing the ulimit option from the container engine and doing this kind
of change on the container side [1].
[1] https://github.com/ceph/ceph-container/pull/1497
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1702285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change adds two tasks to set grafana-api user and password
that are required to inject dashboard layouts to the external
grafana instance.
Without these two parameters the ceph-ansible playbook fails
showing an authorization error (HTTPError: 401 Client Error:
Unauthorized").
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1767365
Signed-off-by: fmount <fpantano@redhat.com>
This brings the possibility to modify the rgw nfs user to use specific
keys when those are defined.
Signed-off-by: Radu Toader <radu.m.toader@gmail.com>
Add ceph_docker_registry_username and ceph_docker_registry_password
variables in ceph-defaults role so they will be present in the group_vars
samples but commented.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1763139
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
since c09b82a80a392ccd0da7677c7b424ce5cd3fa5d6 in ceph/ceph we must call
mon_status from asok instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the support of the ceph-iscsi stable repository when
use ceph_repository community instead of always using the devel
repositories.
We're still using the devel repositories for rtslib and tcmu-runner in
both cases (dev and community).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need this since [1]. Also this was only working for python2 and
not supporting python3.
[1] https://github.com/ceph/ceph-iscsi/commit/00f198a
This reverts commit 167737dd3d.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When deploying with packages then the ceph-container-common role isn't
executed so the registry authentication task is ignored.
Closes: #4636
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This task is failing when `ceph_docker_registry_auth` is enabled and
`ceph_docker_registry_username` is undefined with an ansible error
instead of the expected message.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1763139
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If ansible-lint reports an error then it's skipped. We should fail in
this case.
This patch also fixes the pipefail lint in the rbd mirror role
[306] Shells that use pipes should set the pipefail option
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise it fails like following:
```
TASK [ceph-mds : allow multimds] **************************************************************************************************************************************************
Monday 22 July 2019 16:37:38 +0800 (0:00:03.269) 0:13:25.651 ***********
fatal: [rhel7u6clone1]: FAILED! => {"msg": "The conditional check 'ceph_release_num[ceph_release] == ceph_release_num.luminous' failed. The error was: error while evaluating conditional (ceph_release_num[ceph_release] == ceph_release_num.luminous): 'dict object' has no attribute u'dummy'\n\nThe error appears to have been in '/usr/share/ceph-ansible/roles/ceph-mds/tasks/create_mds_filesystems.yml': line 43, column 3, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n\n- name: allow multimds\n ^ here\n"}
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1645379
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using python3 the name of the rtslib rpm is python3-rtslib. The
packages that use rtslib already have code that detects the python
version and distro deps, so drop it from the ceph iscsi gw task list and
let the ceph-iscsi rpm dependency handle it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1760930
Signed-off-by: Mike Christie <mchristi@redhat.com>
this task is a leftover and no longer needed.
It even causes bug when collocating nfs with mon.
Closes: #4609
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Due the 'failed_when: false' statement present in the peer task then
the playbook continues to ran even if the peer task was failing (like
incorrect remote peer format.
"stderr": "rbd: invalid spec 'admin@cluster1'"
This patch adds a task to list the peer present and add the peer only if
it's not already added. With this we don't need the failed_when statement
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1665877
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There is no need to loop over all mgr nodes to set this fact, it's even
breaking deployments because it tries to copy all mgr keyring on all
mgr.
Closes: #4602
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current ceph-validate role is using both validate action and fail
module tasks to validate the ceph configuration.
The validate action is based on the notario python library. When one of
the notario validation fails then a python stack trace is reported to the
ansible task. This output isn't understandable by users.
This patch removes the validate action and the notario depencendy. The
validation is now done with only fail ansible module.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1654790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
[303] mktemp used in place of tempfile module
[602] Don't compare to empty string
[701] No 'galaxy_info' found
[702] Use 'galaxy_tags' rather than 'categories'
This patch also changes the ansible log_path value via the
ANSIBLE_LOG_PATH environment variable in the travis configuration to
avoid warnings.
[WARNING]: log file at /home/travis/ansible/ansible.log is not writeable
and we cannot create it, aborting
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We are using multiple listen topics with the handlers. That means that
we are notifying 4 tasks for each handler.
Instead we can group the listen on an include_tasks and based on the
group condition.
Before:
NOTIFIED HANDLER ceph-handler : set _mon_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mon restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mon daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mon_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _osd_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy osd restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph osds daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _osd_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _mds_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mds restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mds daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mds_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _rgw_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy rgw restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph rgw daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _rgw_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _mgr_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mgr restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mgr daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mgr_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _rbdmirror_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy rbd mirror restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph rbd mirror daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _rbdmirror_handler_called after restart for mon0
After:
NOTIFIED HANDLER ceph-handler : mons handler for mon0
NOTIFIED HANDLER ceph-handler : osds handler for mon0
NOTIFIED HANDLER ceph-handler : mdss handler for mon0
NOTIFIED HANDLER ceph-handler : rgws handler for mon0
NOTIFIED HANDLER ceph-handler : mgrs handler for mon0
NOTIFIED HANDLER ceph-handler : rbdmirrors handler for mon0
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Delegating on remote node isn't necessary here since we are already
iterating over the right nodes.
Closes: #4518
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit removes some legacy tasks.
These tasks aren't needed, they cause the playbook to fail when
collocating daemons.
Closes: #4553
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds a validation task to prevent from installing an OSD on
the same disk as the OS.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623580
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the mgr dashboard doesn't restart fast enough then the inject
dashboard task will fail with a HTTP error 400.
Error EINVAL: Traceback (most recent call last):
File "/usr/share/ceph/mgr/mgr_module.py", line 914, in _handle_command
return self.handle_command(inbuf, cmd)
File "/usr/share/ceph/mgr/dashboard/module.py", line 450, in handle_command
push_local_dashboards()
File "/usr/share/ceph/mgr/dashboard/grafana.py", line 132, in push_local_dashboards
retry()
File "/usr/share/ceph/mgr/dashboard/grafana.py", line 89, in call
result = self.func(*self.args, **self.kwargs)
File "/usr/share/ceph/mgr/dashboard/grafana.py", line 127, in push
grafana.push_dashboard(body)
File "/usr/share/ceph/mgr/dashboard/grafana.py", line 54, in push_dashboard
response.raise_for_status()
File "/usr/lib/python2.7/site-packages/requests/models.py", line 834, in raise_for_status
raise HTTPError(http_error_msg, response=self)
HTTPError: 400 Client Error: Bad Request
Instead we can trigger this task before the module restart.
Closes: #4565
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit moves this task in order to stop the nfs server service
regardless the deployment type desired (containerized or non
containerized).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508506
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The syntax here wasn't working, this refact fixes this task.
Also, removing the `ignore_errors: true` which was hidding the failure.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508506
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the way we set `ceph_uid` fact in `ceph-facts` and
removes all `set_fact` tasks for `ceph_uid` in switch-to-containers playbook
to avoid duplicated code.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to have dedicated variables for the RGW integration into
the Ceph Dashboard and need to be manually filled.
Instead we can use the current values from the RGW nodes by using the
IP and port from the first RGW instance of the first RGW node via the
radosgw_address and radosgw_frontend_port variables.
We don't need to specify all RGW nodes, this will be done automatically
with one node.
The RGW api scheme is using the radosgw_frontend_ssl_certificate variable
to determine if the value is http or https. This variable is also reuse
as a condition for the ssl verify task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This patch moves the https dashboard configuration into a dedicated
block to avoid the multiple occurence of the dashboard_protocol
condition.
It also fixes the dashboard certificate and key variables handling in
the condition introduced by ab54fe2. Those variables aren't boolean but
strings so we can test them via the length filter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph dashboard tasks didn't use the cluster option if the cluster
name isn't the default value.
Closes: #4529
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit merges the two restart tasks into a single one, this way
it's one task less to notify.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using the ansible --limit option on one or few OSD nodes and if the
handler is triggered then we will restart the OSD service on all OSDs
nodes instead of the hosts limited by the limit value.
Even if the play is limited by the --limit value we are using all OSD
nodes from the OSD group.
with_items: '{{ groups[osd_group_name] }}'
Instead we should iterate only on the nodes present in both OSD group and
limit list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
e695efc introduced a regression in the _radosgw_address fact when using
the radosgw_address_block variable.
There's no item there because we don't use the items lookup. This is
only used for _monitor_address with monitor_address_block.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1758099
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There is no need to get n * number of nodes the different keyrings.
Adding a `run_once: true` here avoid running a ceph command too many
times which could be impacting large cluster deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the rolling_update scenario, the fsid value is retrieve from the
current ceph cluster configuration via the ceph daemon config command.
This command tries first to resolve the admin socket path via the
ceph-conf command.
Unfortunately this command won't work if you have a duplicate key in the
ceph configuration even if it only produces a warning. As a result the
task will fail.
Can't get admin socket path: unable to get conf option admin_socket for
mon.xxx: warning: line 13: 'osd_memory_target' in section 'osd' redefined
Instead of using ceph daemon we can use the --admin-daemon option
because we already know what the socket admin path value based on the
ceph cluster and mon hostname values.
Closes: #4492
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit moves containerized deployment related files to `./tasks/`
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit moves containerized deployment related files to `./tasks/`
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit moves containerized deployment related files to `./tasks/
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit isolates the systemd unit files generation for containers into
separate yml files in order to be able importing each corresponding roles
without playing all tasks.
This is needed so we can run ceph-ansible to render systemd unit files
so they call podman instead of docker.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
e695efc hasn't been updated with the changes introduced in 9bb11c7 so
the ips_in_ranges filter isn't used for an external grafana instance.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The old default prometheus port 9090 clashes with cockpit in rhel 8. The
9090 port is reserved for web service administration of machines. We
should change the default to something that does not clash with other
ports used in rhel 8, at least by default. The port 9092 seems like a
good choice in my testing.
Signed-off-by: Boris Ranto <branto@redhat.com>
The package python-xml is needed for ansible's zypper module to interact with
the zypper package management tool.
roles/ceph-defaults/defaults/main.yml:
Remove python-xml from variable suse_package_dependencies to only
install python-xml on SUSE/openSUSE if python is not found.
raw_install_python.yml already contains all the logic needed to check
if there is a valid python installation, so this is better suited there.
openSUSE Leap 15.x / SLES 15.x do no longer have /usr/bin/python,
only /usr/bin/python3, which already contains the xml module, so
nothing needs to be installed in that case.
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
The set-prometheus-api-host ceph dashboard subcommand was missing in
ceph-dashboard role. Only grafana and alermanager were present.
This commit also remove the trailing slash at the end of the host/url
values.
Closes: #4453
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently, ceph package only an meta-package that do not contain
actual software, but simply depend on other packages. It's been few
release since debian stretch (official), ubuntu bionic (official),
ubuntu uca repository and upstream debian-jewel.
As we only support nautilus and higher release for master branch,
I propose to drop ceph package and use ceph-base instead for repository
model other than rhcs so debian ceph install will be more minimalis.
Signed-off-by: Anthony Rusdi <33247310+antrusd@users.noreply.github.com>
Depending on the infrastruture (w/o kerberos auth) then the SecType
value could be different.
Currently this value is hardcoded in the NFS Ganesha template. Instead
we can use a variable.
The default value is still the same to avoid breaking the backward
compatibility.
Closes: #4459
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change just adds the task to inject from the
ceph dashboard mgr module the required layouts
to show all the cluster metrics on the grafana
instance.
Since we're now able to push grafana layouts through
the ceph mgr module command, the dashboards configuration
template is no longer needed on containerized environments.
This commit also fixes the Vagrantfile IP static assigment
in the grafana section because it generates an issue (it's
the same of the mgr instance).
Finally, considering some deployments that use an external
grafana server instance, we reworked the 'grafana_server_addr'
assignment to address these requirements.
Signed-off-by: fmount <fpantano@redhat.com>
This commit adds the `wal_devices` option support to the
ceph_volume module.
passing a devices list in `bluestore_wal_devices` will make ceph-volume
creating 1 vg using these devices to create block.wal partitions.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the `block_db_devices` option support to the
ceph_volume module.
passing a devices list in `dedicated_devices` will make ceph-volume
creating 1 vg using these devices to create block.db partitions for data
devices.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The registry.redhat.io regsitry requires authentication so before pulling
the RHCS 4 container images from the registry we need to do the login
step.
This is done via the new ceph_docker_registry_auth variable. The
default value is false but true for RHCS setup.
When set to true, you need to provide the username and password
for the registry via the associated variables.
This patch also updates the ceph_docker_registry value for RHCS setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1748911
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In containerized deployment, the restart OSD handler couldn't be
triggered in most ansible execution.
This is due to the usage of run_once + a condition on the inventory
hostname and the last filter.
The run_once is triggered first so ansible will pick a node in the
osd group to execute the restart task. But if this node isn't the
last one in the osd group then the task is ignored. There's more
probability that the task will be ignored than executed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph-rbd-mirror role allows to copy the admin keyring via the
copy_admin_key variable but there's actually no task in that role
doing the job.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The admin keyring isn't present by default on the rbd mirror nodes so
the rbd commands related to the mirroring confguration will fail.
Instead we can use the rbd mirror client keyring.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Dimitri Savineau
George Shuklin
Jonathan Rosser
Guillaume Abrioux
Ali Maredia
Ansible Deployment User
Benoît Knecht
fmount
ianwatsonrh
abaird-rh
Paulo Matias
petruha
Christian Berendt
Sam Choraria
Florian Faltermeier
John Fulton
Mike Christie
Dmitriy Rabotyagov
Vytenis Sabaliauskas
Stanley Lam
Philip Brown
VasishtaShastry
Mihai Plasoianu
Radu Toader
Boris Ranto
Johannes Kastl
Harald Jensås
Anthony Rusdi
liuxu