config_template.py depends on six, which isn't listed in the default
requirements.txt. This previously frequently wasn't a problem, because
six used to be a standard package being installed into a venv, and
lots of other projects depended on it.
It also does get installed for unit and integration tests via
tests/requirements.txt, so any broken dependency on six wouldn't be
detected by tox runs.
However, as other projects and distributions have phased out Python
2.7 support the dependency on six becomes less common. Thus, as long
as ceph-ansible does require it for config_template.py, add it to the
base requirements.
Signed-off-by: Florian Haas <florian@citynetwork.eu>
(cherry picked from commit d49ea9818b)
Otherwise, the job fails when it tries to create a bucket with `s3cmd mb`
command because we have too many PGs per OSD.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 54bae480d2)
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 71a5e666e3)
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5da593604a)
Currently we create an object from the primary sites but we try to read
that object still from the master which doesn't make sense, we should
try to read it from a secondary site.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e2ea403d5e)
adding monitor is no longer possible because we generate a new mon
keyring each time the playbook is run.
Fixes: #5864
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 970c6a4ee6)
Currently the `ceph_key` module doesn't support using a different
keyring than `client.admin`.
This commit adds the possibility to use a different keyring.
Usage:
```
ceph_key:
name: "client.rgw.myrgw-node.rgw123"
cluster: "ceph"
user: "client.bootstrap-rgw"
user_key: /var/lib/ceph/bootstrap-rgw/ceph.keyring
dest: "/var/lib/ceph/radosgw/ceph-rgw.myrgw-node.rgw123/keyring"
caps:
osd: 'allow rwx'
mon: 'allow rw'
import_key: False
owner: "ceph"
group: "ceph"
mode: "0400"
```
Where:
`user` corresponds to `-n (--name)`
`user_key` corresponds to `-k (--keyring)`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 12e6260266)
This commit enforces the pytest-rerunfailures installed so it's <9.0
This is to avoid the following error:
```
ERROR: pytest-rerunfailures 9.0 has requirement pytest>=5.0, but you'll have pytest 4.6.11 which is incompatible.
```
latest version of pytest-rerunfailures isn't compatible with the version
of pytest we are using.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19097026fb)
`all_daemons` scenario can't handle pools with `size: 3` because we have
1 osd node in root=HDD and two nodes in root=default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e5713ea5d5)
Currently the `ceph_key` module doesn't support using a different
keyring than `client.admin`.
This commit adds the possibility to use a different keyring.
Usage:
```
ceph_key:
name: "client.rgw.myrgw-node.rgw123"
cluster: "ceph"
user: "client.bootstrap-rgw"
user_key: /var/lib/ceph/bootstrap-rgw/ceph.keyring
dest: "/var/lib/ceph/radosgw/ceph-rgw.myrgw-node.rgw123/keyring"
caps:
osd: 'allow rwx'
mon: 'allow rw'
import_key: False
owner: "ceph"
group: "ceph"
mode: "0400"
```
Where:
`user` corresponds to `-n (--name)`
`user_key` corresponds to `-k (--keyring)`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 12e6260266)
tests/conftest.py and tests present in tests/functional/tests/ has been
missed from previous commit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8596f1d52c)
# Conflicts:
# .github/workflows/flake8.yml
This commit modifies all *.py files in ./tests/library/ so flake8
passes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e49a5241f0)
We need to skip these tests on client nodes since we don't deploy
node_exporter on them anymore
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5650a6d7d0)
We were only supporting CentOS 8 for containerized deployment.
Since Nautilus 14.2.10 we now have el8 rpm packages so we should be
able to deploy a nautilus ceph cluster with el8.
Note that the nfs-ganesha isn't supported because there's no el8 rpm
packages for nfs-ganesha V2.8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise we see some pytest warning.
PytestUnknownMarkWarning: Unknown pytest.mark.ceph_crash - is this a typo?
You can register custom marks to avoid this warning - for details,
see https://docs.pytest.org/en/latest/mark.html
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 03d4620269)
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9d2f2108e1)
This changes the grafana container image regitry from docker.io to
quay.io to avoid rate limit.
This also adds the missing container image values for docker2podman
and podman scenarios.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dd05d8ba90)
This commit moves the erasure pool creation testing from `all_daemons`
to `lvm_osds` so we can decrease the number of osd nodes we spawn so the
OVH Jenkins slaves aren't less overwhelmed when a `all_daemons` based
scenario is being tested.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8476beb5b1)
This commit adds crlf between each task.
It makes the playbook more readable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8ef9fb68bc)
when rerunning lvm_setup.yml on existing cluster with OSDs already
deployed, it fails like following:
```
fatal: [osd0]: FAILED! => changed=false
msg: Sorry, no shrinking of data-lv2 to 0 permitted.
```
because we are asking `lvol` module to create a volume on an empty VG
with size extents = `100%FREE`.
The default behavior of `lvol` is to shrink the volume if the LV's current
size is greater than the requested size.
Given the requested size is calculated like this:
`size_requested = size_percent * this_vg['free'] / 100`
in our case, it is similar to:
`size_requested = 100 * 0 / 100` which basically means `0`
So the current LV size is well greater than the requested size which
leads the module to attempt to shrink it to 0 which isn't obviously now
allowed.
Adding `shrink: false` to the module calls fixes this issue.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 218f4ae361)
Since [1] if a rgw user already exists then the radosgw-admin user create
command will return an error instead of modifying the current user.
We were already doing separated tasks for create and get operation but
only for multisite configuration but it's not enough.
Instead we should do the get task first and depending on the result
execute the create.
This commit also adds missing run_once and delegate_to statement.
[1] https://github.com/ceph/ceph/commit/269e9b9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ac0f68ccf0)
This fixes a long standing fail in ceph-volumes lvm test suite.
Otherwise the default behaviour should not change.
Signed-off-by: Jan Fajerski <jfajerski@suse.com>
(cherry picked from commit 1fe8e819f9)
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 829990e60d)
This commit makes the zap function idempotent, especially when using
lvm_volumes variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1845668
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3f47236470)
The dashboard nodes (alertmanager, grafana, node-exporter, and prometheus)
were not manage during the docker to podman migration.
This adds the systemd container template of those services to a dedicated
file (systemd.yml) in order to include it in the docker2podman playbook.
This also adds the dashboard container images pull from docker to podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829389
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 252e78b4e4)
Since 15ed9ee the ceph-mgr daemon binds on the IP address on the public
network instead of binding on all addresses.
This commit updates the testinfra code to reflect that change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0f0a14772c)
Unregister marks generates warnings like:
PytestUnknownMarkWarning: Unknown pytest.mark.docker - is this a typo?
You can register custom marks to avoid this warning
https://docs.pytest.org/en/latest/mark.html
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ac4f8763aa)
With this change, the state `present` is enough to update a keyring.
If the keyring already exist, it will be updated if caps or secret
passed to the module are different.
If the keyring doen't exist, it will be created.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1808367
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 553584cbd0)
When using the lvm batch ceph-volume subcommand with dedicated devices
for bluestore (db/wal) then the list of devices is convert to a string
instead of being extended via an iterable.
This was working with only one dedicated device but starting with more
then the ceph_volume module fails.
TASK [ceph-osd : use ceph-volume lvm batch to create bluestore osds] **
fatal: [xxxxxx]: FAILED! => changed=true
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- batch
- --bluestore
- --yes
- --prepare
- --osds-per-device
- '4'
- /dev/nvme2n1
- /dev/nvme3n1
- /dev/nvme4n1
- /dev/nvme5n1
- /dev/nvme6n1
- --db-devices
- /dev/nvme0n1 /dev/nvme1n1
- --report
- --format=json
msg: non-zero return code
rc: 2
stderr: |2-
stderr: lsblk: /dev/nvme0n1 /dev/nvme1n1: not a block device
stderr: error: /dev/nvme0n1 /dev/nvme1n1: No such file or directory
stderr: Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.
usage: ceph-volume lvm batch [-h] [--db-devices [DB_DEVICES [DB_DEVICES ...]]]
[--wal-devices [WAL_DEVICES [WAL_DEVICES ...]]]
[--journal-devices [JOURNAL_DEVICES [JOURNAL_DEVICES ...]]]
[--no-auto] [--bluestore] [--filestore]
[--report] [--yes] [--format {json,pretty}]
[--dmcrypt]
[--crush-device-class CRUSH_DEVICE_CLASS]
[--no-systemd]
[--osds-per-device OSDS_PER_DEVICE]
[--block-db-size BLOCK_DB_SIZE]
[--block-wal-size BLOCK_WAL_SIZE]
[--journal-size JOURNAL_SIZE] [--prepare]
[--osd-ids [OSD_IDS [OSD_IDS ...]]]
[DEVICES [DEVICES ...]]
ceph-volume lvm batch: error: Unable to proceed with non-existing device: /dev/nvme0n1 /dev/nvme1n1
So the dedicated device list is considered as a single string.
This commit also adds the block_db_devices and wal_devices documentation
to the ceph_volume module.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816713
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 760b6cd7b0)
This commit allows one to set the role for the admin user as read-only.
This can be controlled via the dashboard_admin_user_ro variable but the
default value is false for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1810176
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fb69f6990c)
3.4 is the latest testinfra release available but python2 is dropped
starting 4.0.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ccec67aa6a)
This commit adds more osd nodes in all_daemons scenario in order to test
erasure pool creation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9f0c6df94f)
This commit changes the value passed for the attribute 'rule_name' in
openstack_pools definition. It doesn't make sense to have emptry string
as passed value here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 248978596a)
This commit makes the CI testing an OSD pool erasure creation due to the
recent refact of the OSD pool creation tasks in the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8cacba1f54)
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 71f55bd54d)
Set these 2 variables in all test scenarios where `dashboard_enabled` is
`True`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c040199c8f)
Florian Haas
Guillaume Abrioux
Dimitri Savineau
Jan Fajerski
Ali Maredia