Alphabetized ceph_repository_uca keys due to errors validating when
using UCA/queens repository on Ubuntu 16.04
An exception occurred during task execution. To see the full
traceback, use -vvv. The error was:
SchemaError: -> ceph_stable_repo_uca schema item is not
alphabetically ordered
Closes: #4154
Signed-off-by: Gabriel Ramirez <gabrielramirez1109@gmail.com>
(cherry picked from commit 82262c6e8c)
This change pulls in the most recent release of the config_template module
into the ceph_ansible action plugins.
Signed-off-by: Kevin Carter <kecarter@redhat.com>
(cherry picked from commit 789cef7621)
The current lvm_osds only tests filestore on one OSD node.
We also have bs_lvm_osds to test bluestore and encryption.
Let's use only one scenario to test filestore/bluestore and with or
without dmcrypt on four OSD nodes.
Also use validate_dmcrypt_bool_value instead of types.boolean on
dmcrypt validation via notario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 52b9f3fb28)
Typical error:
```
AttributeError: 'Invalid' object has no attribute 'message'
```
As of python 2.6, `BaseException.message` has been deprecated.
When using python3, it fails because it has been removed.
Let's use `str(error)` instead so we don't hit this error when using
python3.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2326180bf9)
osd_scenario now defaults to lvm and should not be changed. So we don't
need to test it.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 72211d4a24)
Ubuntu cloud archive is configurable via ceph_repository variable but
the uca choice isn't accepted.
This commit fixes this issue and also validates the associated uca
repository variables.
Resolves: #3739
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If osd_auto_discovery is set with the lvm scenario it's expected for
lvm_volumes and devices to be empty.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
"missing variable" errors introduced by PR3058 would attempt to
be reported, but since the exception contained no "path" definition,
would cause a second exception in the Invalid exception handler.
Make the exception handler verify that any field it tries to use
exists, clean up its message formatting, and reduce the verbose
level to see the literal error from notario in case more goes
wrong in future.
Signed-off-by: Dan Mick <dan.mick@redhat.com>
ceph-validate used to throw error for setting flags as 'true' or 'false' for True and False
Now user can set the flags 'dmcrypt' and 'osd_auto_discovery' as 'true' or 'false'
Will fix - Bug 1638325
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
If the version of python-notario is < 0.0.13 an error message is given
like "TypeError: validate() got an unexpected keyword argument
'defined_keys'", which is not helpful in figuring
out you've got an incorrect version of python-notario.
This check will avoid that situation by telling the user that they need
to upgrade python-notario before they hit that error.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The original_basename option in the copy module changed to be
_original_basename in Ansible 2.6+, this PR resyncs the config_template
module to allow this to work with both Ansible 2.6+ and before.
Additionally, this PR removes the _v1_config_template.py file, since
ceph-ansible no longer supports versions of Ansible before version 2,
and so we shouldn't continue to carry that code.
Closes: #2843
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
Some fixes have gone into
git.openstack.org/openstack/ansible-config_template to deal with a few
bugs we have run into.
This PR brings the ceph-ansible config_template version up to the same
as the ansible-config_template openstack repo.
Closes: #2742
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
This error message may be confusing and need to be more explicit on
where you have to install notario, indeed, people may think this library
must be installed on configured nodes while it must be installed on the
node you are running the playbook.
Fixes: #2649
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The bluestore lvm osd scenario does not require a journal entry. For
this reason we need to have a separate schema for that and filestore or
notario will fail validation for the bluestore lvm scenario because the
journal key does not exist in lvm_volumes.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
(cherry picked from commit d916246bfeb927779fa920bab2e0cc736128c8a7)
objectstore is not a valid option, it's osd_objectstore and it's already
validated in install_options
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Add support for the Ansible --diff mode in config_template. This will
show the before/after for config_template changes, in the same way as
the base copy and template modules do.
To utilise this run your playbooks with "--diff --check".
In ec042219e6 we added OrderedDict and
sorted to be able to preserve order for config_template k,v pairs inside
a section.
This patch adds a similar ordering for the sections themselves, which
could still change order and intiiate handler restarts.
OrderedDict isn't needed because we use .items() to return a list that
can then be sorted().
Handlers are always triggered in ceph-ansible because ceph.conf file is
generated with a randomly order for the different keys/values pairs
in sections.
In python, a dict is not sorted. It means in our case each time we try
to generate the ceph.conf file it will be rendered with a random order
since the mecanism behind consist of rendering a file from a python dict
with keys/values. Therefore, as a quick workaround, forcing this dict to be
sorted before rendering the configuration file will ensure that it will be
rendered always the same way.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ansible 2.2 deprecates first_available_file option which is used in
the config_template module by 'generate ceph configuration file' task.
This change syncs the config_module files from their master repository
in github.com/openstack/openstack/ansible-plugins which includes the fix
2f6cac2cf6
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
This change allows keys in INI format to be any case.
The default ConfigParse module sets this to be lower
however in some cases keys are needed to be upper and/or
mixed.
Change-Id: I4e0dedb1b73ee596929bd425af6b0aaefd3a6c27
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
(cherry picked from commit f946160dd0)
These changes address 2 issues:
* The config template plugin in v1 mode was not respecting a list
of integers and would cause a stacktrace because the ConfigParese
module expects everything written to be a string.
* The config template plugin in v2 mode was not properly handingly
the multi-string-op type due to an oversight in the ``_option_write``
method.
With these updates the config template is now able to better support
all of the potential options that could be thrown at it when writing
an INI config file.
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
This change updates the config_template plugin to load
the version of the config_template needed based on the
detected version of ansible running. Note, Once the
upstream change merges for ansible 2 [0] we should
drop the ansible 2 version of this plugin.
[0] - https://github.com/ansible/ansible/pull/12555
Change-Id: Ifbdde0f30ee2bd8025ede07c86234527ba9891db
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
Thanks to @cloudnull great patch at
https://github.com/ansible/ansible/pull/12555
we now have the ability to add more configuration options instead of
having to push a PR to add a new option to the template. So you can
dynamically add and remove flags.
To use it, edit `ceph_conf_overrides` in `group_vars/all` like so:
```
ceph_conf_overrides
global:
foo: 12345
bar: 6789
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Gabriel Ramirez
Kevin Carter
Dimitri Savineau
Guillaume Abrioux
Sébastien Han
Andrew Schoen
Justin Riley
Rishabh Dave
Dan Mick
VasishtaShastry
Andy McCrae
Alfredo Deza
Alberto Murillo Silva
Kevin Carter