These variables aren't consummed anywhere else than in ceph-nfs role so
there is no need to have them in `ceph-defaults`'s defaults
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit fixes these tasks when --limit is used.
It makes sure the fact is set on right nodes even when the playbook is
run with `--limit`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph-dashboard role is executed on the mgr nodes so the TLS cert/key
files are copied to those nodes.
But we are running importing the cert/key files into the ceph
configuration on the monitor.
Closes: #5557
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The download.nfs-ganesha.org source for nfs-ganesha on CentOS isn't
available anymore.
Let's switch back to shaman since we have builds available now.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
nfs-ganesha 3.3 is the latest 3.x release available for octopus so we
should update to this version.
https://download.ceph.com/nfs-ganesha/rpm-V3.3-stable/octopus
This will also match the version used in RHCS 5.
Ceph container already uses that version too.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
All EL8 dependencies are now present on EPEL 8 so we don't need the
additional repositories that were only a temporary solution.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We need to set the mgr dashboard server ip address before restarting the
dashboard module otherwise we can try to bind the dashboard module on an
already used address.
We already do this configuration for the dashboard port value and ssl
setup so we should do the same for server address too.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851455
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is now a dependancy of ceph-mgr so will be installed automatically
and does not need a specific task.
This change means that ceph-mgr installs correctly on Ubuntu Focal where
the python3-routes package is necessary.
Signed-off-by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
This commit makes the playbook copying self-signed generated certificate
to monitors.
When mons and mgrs are deployed on dedicated nodes the playbook will
fail when trying to import certificate and key files since they are
generated on mgrs whereas we try to import them from a monitor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When a container image managed by podman isn't tag anymore then the
RepoDigests field when inspecting the image doesn't return any value.
This is different from docker workflow and it breaks the ceph-ansible
container upgrade when collocated multiple services and using a non
fix container tag (like latest or 4).
$ podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 957 MB
<none> <none> 011ee108bfc9 2 months ago 1.01 GB
$ podman inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:20cf789235e23ddaf38e109b391d1496bb88011239d16862c4c106d0e05fea9e"
$ podman inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
null
Because this field returns "null" then the ansible task trying to
determine this value is failing
-----------------------------
fatal: [foo]: FAILED! =>
msg: |-
The task includes an option with an undefined variable. The error
was: None has no element 0
The error appears to be in
'roles/ceph-container-common/tasks/fetch_image.yml': line 137,
column 3, but may be elsewhere in the file depending on the exact
syntax problem.
The offending line appears to be:
- name: set_fact ceph_osd_image_repodigest_before_pulling
^ here
-----------------------------
We don't have this behaviour with docker.
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 928 MB
docker.io/ceph/daemon <none> 011ee108bfc9 2 months ago 986 MB
$ docker inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:45e6f28bb67c81b826acb64fad5c0da1cac3dffb41a88992fe4ca2be79575fa6"
$ docker inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:b393a73309d72e43ca7d65cd3519036007947671e373eb59aa75a46185c52231"
Instead we should just get the Id field.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1844496
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We were only adding the endpoints to the master zone but not to the
zonegroup.
This patch fixes the issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1839228
Signed-off-by: Ali Maredia <amaredia@redhat.com>
The vrrp_instances variable is using a loop with index but the index_var
wasn't defined.
As a result, the fact task was failing on this undefined index variable.
The task includes an option with an undefined variable. The error was:
'index' is undefined
Closes: #5395
Signed-off-by: Florian Faltermeier <florian.faltermeier@uibk.ac.at>
When using the stable nfs ganesha repository, we need have both arch
and noarch repositories enabled.
Currently the noarch repository is missing which cause the non
containerized deployment to fail.
Closes: #5375
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commits calls the `ceph_pool` module for creating ceph pools
everywhere it's needed in the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The condition on this task is wrong, we have to check whether
`target_size_ratio` is set in the pool definition instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
always set these facts on monitor nodes whatever we run with `--limit`.
Otherwise, playbook will fail when using `--limit` on nodes where these
facts are used on a delegated task to monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The dashboard nodes (alertmanager, grafana, node-exporter, and prometheus)
were not manage during the docker to podman migration.
This adds the systemd container template of those services to a dedicated
file (systemd.yml) in order to include it in the docker2podman playbook.
This also adds the dashboard container images pull from docker to podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829389
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using an untrusted TLS certificate (like self-signed) on grafana
then the grafana dashboards update subcommand will fail.
One solution could be to trust the TLS certificate.
The other one is to disable the TLS verification on the grafana API.
Closes: #5324
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The current ganesha log directory is only present in the container
and not bind mount on the host.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Same fix as `ceph-rgw` for `rgw_create_pools` pool names that contain Jinja
templates.
See #5348 for details.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
It is common to set templated pool names in `rgw_create_pools`, e.g.
```yaml
rgw_create_pools:
"{{ rgw_zone }}.rgw.buckets.index":
pg_num: 16
size: 3
type: replicated
```
This worked fine with Ansible 2.8, but broke in Ansible 2.9 due to a change in
the way `with_dict` works [1].
This commit replaces the use of `with_dict` with
```yaml
loop: "{{ rgw_create_pools | dict2items }}"
```
which works as intended and expands the template in the pool name.
[1]: https://docs.ansible.com/ansible/latest/porting_guides/porting_guide_2.9.html#loopsCloses#5348
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The `dashboard_enabled` condition used a `true` filter (which doesn't exist)
instead of the `bool` filter.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The '==' jinja2 operator (or 'equalto') has been introduced in jinja2
2.8.
On EL7, jinja2 version is 2.7 so the operator isn't present creating
templating error like:
The error was: TemplateRuntimeError: no test named '=='
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1747206
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since ea2b654d9 we're not running the rados command from the monitor
nodes but from the ganesha node. Unfortunately we don't have the
required keyring on that node to run the rados command as we don't
import the right keyring.
This commit restores the workflow for internal ganesha deployment like
before ea2b654d9 but keeps the rados commands from the ganesha node for
external deployment until we have a better design.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Fix the condition on the keyring copy task that prevent the ganesha
keyring to be created in the /var/lib/ceph directory.
Also ensure that the directory exists first.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The condition is missing an index here which makes the playbook failing.
Typical error:
```
The conditional check 'not item.get('skipped', False)' failed. The error was: error while evaluating conditional (not item.get('skipped', False)): 'list object' has no attribute 'get'",
```
Also, adds the missing '/keyring' on the `exec_cmd_nfs` fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831342
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using radosgw_interface and IPv6 setup then the _radosgw_address
fact doesn't use square brackets compared to the radosgw_address and
radosgw_address_block configuration.
Closes: #5325
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change allows the operator to refresh the
ceph dashboard admin role on multiple ceph-ansible
executions.
In the current state the role is set only when the
user is created, and there's no way to change it if
the user exists.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1826002
Signed-off-by: fmount <fpantano@redhat.com>
15ed9ee introduced a regression for the mgr dashboard daemon using
IPv6 since the mgr dashboard configuration doesn't support brackets.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1827299
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The CentOS 7 distribution could still be used be deploying ceph if
- it's a containerized deployment
- it's a non containerized deployment without the dashboard (due to
missing python3 libraries).
The ceph_stable_redhat_distro variable has been remove because we can
rely on the ansible_distribution_major_version fact instead.
The copr el8 repository configuration is only applied for CentOS 8.
The ceph-mgr-dashboard package is only installed when the
dashboard_enabled variable is set to true.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this commit removes the task which enable application on cephfs pools.
See: https://tracker.ceph.com/issues/43761Fixes: #5278
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This was removed in Ansible 2.9.
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|version_compare` use `result is version_compare`. This
feature will be removed in version 2.9. Deprecation warnings can be
disabled by setting deprecation_warnings=False in ansible.cfg.
Rename 'version_compare' to the function 'version'.
version_compose was renamed to version since ansible 2.5
Signed-off-by: abaird-rh <abaird@redhat.com>
This commit creates an empty rados index object even when deploying
standalone nfs-ganesha.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822328
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We were not testing the right ansible_distribution fact value for RHEL
distribution.
This commit also updates the minial RHEL version supported by RHCS.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit fixes a bug when trying to scale out osd nodes with
`crush_rule_config` is enabled.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822599
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed to get a TLS certificate to validate correctly.
If unspecified, auto-detected grafana_server_addr is used.
Signed-off-by: Paulo Matias <matias@ufscar.br>
Trying to access these APIs through TLS produces "Could not reach
external API" errors in Ceph dashboard.
Signed-off-by: Paulo Matias <matias@ufscar.br>
Guillaume Abrioux
Dimitri Savineau
George Shuklin
Jonathan Rosser
Ali Maredia
Ansible Deployment User
Benoît Knecht
fmount
ianwatsonrh
abaird-rh
Paulo Matias