In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We should ensure the container is removed in `ExecPreStart` even when
`{{ container_binary }}` is docker.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These variables aren't consummed anywhere else than in ceph-nfs role so
there is no need to have them in `ceph-defaults`'s defaults
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit fixes these tasks when --limit is used.
It makes sure the fact is set on right nodes even when the playbook is
run with `--limit`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph-dashboard role is executed on the mgr nodes so the TLS cert/key
files are copied to those nodes.
But we are running importing the cert/key files into the ceph
configuration on the monitor.
Closes: #5557
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The download.nfs-ganesha.org source for nfs-ganesha on CentOS isn't
available anymore.
Let's switch back to shaman since we have builds available now.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
nfs-ganesha 3.3 is the latest 3.x release available for octopus so we
should update to this version.
https://download.ceph.com/nfs-ganesha/rpm-V3.3-stable/octopus
This will also match the version used in RHCS 5.
Ceph container already uses that version too.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
All EL8 dependencies are now present on EPEL 8 so we don't need the
additional repositories that were only a temporary solution.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We need to set the mgr dashboard server ip address before restarting the
dashboard module otherwise we can try to bind the dashboard module on an
already used address.
We already do this configuration for the dashboard port value and ssl
setup so we should do the same for server address too.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851455
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is now a dependancy of ceph-mgr so will be installed automatically
and does not need a specific task.
This change means that ceph-mgr installs correctly on Ubuntu Focal where
the python3-routes package is necessary.
Signed-off-by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
This commit makes the playbook copying self-signed generated certificate
to monitors.
When mons and mgrs are deployed on dedicated nodes the playbook will
fail when trying to import certificate and key files since they are
generated on mgrs whereas we try to import them from a monitor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When a container image managed by podman isn't tag anymore then the
RepoDigests field when inspecting the image doesn't return any value.
This is different from docker workflow and it breaks the ceph-ansible
container upgrade when collocated multiple services and using a non
fix container tag (like latest or 4).
$ podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 957 MB
<none> <none> 011ee108bfc9 2 months ago 1.01 GB
$ podman inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:20cf789235e23ddaf38e109b391d1496bb88011239d16862c4c106d0e05fea9e"
$ podman inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
null
Because this field returns "null" then the ansible task trying to
determine this value is failing
-----------------------------
fatal: [foo]: FAILED! =>
msg: |-
The task includes an option with an undefined variable. The error
was: None has no element 0
The error appears to be in
'roles/ceph-container-common/tasks/fetch_image.yml': line 137,
column 3, but may be elsewhere in the file depending on the exact
syntax problem.
The offending line appears to be:
- name: set_fact ceph_osd_image_repodigest_before_pulling
^ here
-----------------------------
We don't have this behaviour with docker.
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 928 MB
docker.io/ceph/daemon <none> 011ee108bfc9 2 months ago 986 MB
$ docker inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:45e6f28bb67c81b826acb64fad5c0da1cac3dffb41a88992fe4ca2be79575fa6"
$ docker inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:b393a73309d72e43ca7d65cd3519036007947671e373eb59aa75a46185c52231"
Instead we should just get the Id field.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1844496
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We were only adding the endpoints to the master zone but not to the
zonegroup.
This patch fixes the issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1839228
Signed-off-by: Ali Maredia <amaredia@redhat.com>
The vrrp_instances variable is using a loop with index but the index_var
wasn't defined.
As a result, the fact task was failing on this undefined index variable.
The task includes an option with an undefined variable. The error was:
'index' is undefined
Closes: #5395
Signed-off-by: Florian Faltermeier <florian.faltermeier@uibk.ac.at>
When using the stable nfs ganesha repository, we need have both arch
and noarch repositories enabled.
Currently the noarch repository is missing which cause the non
containerized deployment to fail.
Closes: #5375
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commits calls the `ceph_pool` module for creating ceph pools
everywhere it's needed in the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The condition on this task is wrong, we have to check whether
`target_size_ratio` is set in the pool definition instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
always set these facts on monitor nodes whatever we run with `--limit`.
Otherwise, playbook will fail when using `--limit` on nodes where these
facts are used on a delegated task to monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The dashboard nodes (alertmanager, grafana, node-exporter, and prometheus)
were not manage during the docker to podman migration.
This adds the systemd container template of those services to a dedicated
file (systemd.yml) in order to include it in the docker2podman playbook.
This also adds the dashboard container images pull from docker to podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829389
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using an untrusted TLS certificate (like self-signed) on grafana
then the grafana dashboards update subcommand will fail.
One solution could be to trust the TLS certificate.
The other one is to disable the TLS verification on the grafana API.
Closes: #5324
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The current ganesha log directory is only present in the container
and not bind mount on the host.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Same fix as `ceph-rgw` for `rgw_create_pools` pool names that contain Jinja
templates.
See #5348 for details.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
It is common to set templated pool names in `rgw_create_pools`, e.g.
```yaml
rgw_create_pools:
"{{ rgw_zone }}.rgw.buckets.index":
pg_num: 16
size: 3
type: replicated
```
This worked fine with Ansible 2.8, but broke in Ansible 2.9 due to a change in
the way `with_dict` works [1].
This commit replaces the use of `with_dict` with
```yaml
loop: "{{ rgw_create_pools | dict2items }}"
```
which works as intended and expands the template in the pool name.
[1]: https://docs.ansible.com/ansible/latest/porting_guides/porting_guide_2.9.html#loopsCloses#5348
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The `dashboard_enabled` condition used a `true` filter (which doesn't exist)
instead of the `bool` filter.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The '==' jinja2 operator (or 'equalto') has been introduced in jinja2
2.8.
On EL7, jinja2 version is 2.7 so the operator isn't present creating
templating error like:
The error was: TemplateRuntimeError: no test named '=='
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1747206
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since ea2b654d9 we're not running the rados command from the monitor
nodes but from the ganesha node. Unfortunately we don't have the
required keyring on that node to run the rados command as we don't
import the right keyring.
This commit restores the workflow for internal ganesha deployment like
before ea2b654d9 but keeps the rados commands from the ganesha node for
external deployment until we have a better design.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Fix the condition on the keyring copy task that prevent the ganesha
keyring to be created in the /var/lib/ceph directory.
Also ensure that the directory exists first.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The condition is missing an index here which makes the playbook failing.
Typical error:
```
The conditional check 'not item.get('skipped', False)' failed. The error was: error while evaluating conditional (not item.get('skipped', False)): 'list object' has no attribute 'get'",
```
Also, adds the missing '/keyring' on the `exec_cmd_nfs` fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831342
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using radosgw_interface and IPv6 setup then the _radosgw_address
fact doesn't use square brackets compared to the radosgw_address and
radosgw_address_block configuration.
Closes: #5325
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change allows the operator to refresh the
ceph dashboard admin role on multiple ceph-ansible
executions.
In the current state the role is set only when the
user is created, and there's no way to change it if
the user exists.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1826002
Signed-off-by: fmount <fpantano@redhat.com>
15ed9ee introduced a regression for the mgr dashboard daemon using
IPv6 since the mgr dashboard configuration doesn't support brackets.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1827299
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The CentOS 7 distribution could still be used be deploying ceph if
- it's a containerized deployment
- it's a non containerized deployment without the dashboard (due to
missing python3 libraries).
The ceph_stable_redhat_distro variable has been remove because we can
rely on the ansible_distribution_major_version fact instead.
The copr el8 repository configuration is only applied for CentOS 8.
The ceph-mgr-dashboard package is only installed when the
dashboard_enabled variable is set to true.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this commit removes the task which enable application on cephfs pools.
See: https://tracker.ceph.com/issues/43761Fixes: #5278
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This was removed in Ansible 2.9.
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|version_compare` use `result is version_compare`. This
feature will be removed in version 2.9. Deprecation warnings can be
disabled by setting deprecation_warnings=False in ansible.cfg.
Rename 'version_compare' to the function 'version'.
version_compose was renamed to version since ansible 2.5
Signed-off-by: abaird-rh <abaird@redhat.com>
This commit creates an empty rados index object even when deploying
standalone nfs-ganesha.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822328
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We were not testing the right ansible_distribution fact value for RHEL
distribution.
This commit also updates the minial RHEL version supported by RHCS.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit fixes a bug when trying to scale out osd nodes with
`crush_rule_config` is enabled.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822599
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed to get a TLS certificate to validate correctly.
If unspecified, auto-detected grafana_server_addr is used.
Signed-off-by: Paulo Matias <matias@ufscar.br>
Trying to access these APIs through TLS produces "Could not reach
external API" errors in Ceph dashboard.
Signed-off-by: Paulo Matias <matias@ufscar.br>
Make a tempfile directory and copy the restart scripts there (and then
execute them from there), rather than using insecure known filenames
in /tmp/
This is a partial fix for ceph/ceph-ansible#2937
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
The dashboard SSO mgr module requires the saml python library to be
installed. This is only a valid scenario for RHCS deployment because
the saml python library isn't available in other classic repositories.
This package is present in RHCS Tools repository so we also need to
enable it on the mgr nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1820233
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Creating crush rules even with no crush hierarchy configuration is a
valid scenario so we shouldn't be bound to the first task result (which
configure crush hierarchy) to be able to add new crush rules.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816989
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since Ceph Octopus is python3 only we don't need to specify the max open
files anymore with the container engine.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is no longer true, let's remove this comment given that this option
is not ignored in containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In master, even though we are using dev repo, the value here should be closer
from the last stable released.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The rgw_instances_all fact is supposed to be the list of all radosgw
instances from all rgw nodes.
But the fact is always using the local rgw_instances variable so this
won't work on multiple nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit allows one to set the role for the admin user as read-only.
This can be controlled via the dashboard_admin_user_ro variable but the
default value is false for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1810176
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't use the registry name when using the community dashboard
container images (grafana, prometheus, alertmanager & node exporter).
This commit adds the docker.io registry explicitly in the default
dashboard container image name values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since 8e8aa73 we're using grafana 5.4.3 in RHCS 4.1 via [1].
We should also update the grafana container tag from docker.io when
using the community release.
[1] registry.redhat.io/rhceph/rhceph-4-dashboard-rhel8:4
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This option has been deprecated (As of 0.51).
By the way, ceph-ansible already sets the
auth_{service,client,cluster}_required variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using the radosgw multi instances configuration then the firewall
rules aren't adapted to that setup.
We only open the port according to the radosgw_frontend_port variable
so only the first radosgw instance port will be opened in the firewall
configuration.
We should instead iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we can't use osd pool without replicas (size: 1) by default.
We now need to set the mon_allow_pool_size_one flag to true in the ceph
configuration and add the --yes-i-really-mean-it flag to the osd pool
set size cli.
[1] https://github.com/ceph/ceph/commit/21508bd
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit make that task retrying 5 times to start the service
firewalld to avoid failure like following:
```
TASK [ceph-infra : start firewalld] ********************************************
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-centos-container-purge/roles/ceph-infra/tasks/configure_firewall.yml:22
Monday 09 March 2020 08:58:48 +0000 (0:00:00.963) 0:02:16.457 **********
fatal: [osd4]: FAILED! => changed=false
msg: |-
Unable to enable service firewalld: Created symlink from /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service to /usr/lib/systemd/system/firewalld.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/firewalld.service to /usr/lib/systemd/system/firewalld.service.
Failed to execute operation: Connection reset by peer
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of volumes as a static string the openstack_cinder_pool.name
variable should be used as with the other keys.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
Sometimes, these task can timeout for some reason.
Adding these retries can help to avoid unexcepted failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to run this part of the role when upgrading clients
node. Let's skip it when rolling_update.yml is being run.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
This commit adds condition in order to not try to customize pools size
when its type is erasure.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the pg autoscaler support.
The structure for pool definition has now two additional attributes
`pg_autoscale_mode` and `target_size_ratio`, eg:
```
test:
name: "test"
pg_num: "{{ osd_pool_default_pg_num }}"
pgp_num: "{{ osd_pool_default_pg_num }}"
rule_name: "replicated_rule"
application: "rbd"
type: 1
erasure_profile: ""
expected_num_objects: ""
size: "{{ osd_pool_default_size }}"
min_size: "{{ osd_pool_default_min_size }}"
pg_autoscale_mode: False
target_size_ratio": 0.1
```
when `pg_autoscale_mode` is `True` user has to set a decent value in
`target_size_ratio`.
Given that it's a new feature, it's still disabled by default.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1782253
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently, the command executed is wrong, eg:
```
cmd:
- podman
- exec
- ceph-mon-controller-0
- ceph
- --cluster
- ceph
- osd
- pool
- create
- volumes
- '32'
- '32'
- replicated_rule
- '1'
delta: '0:00:01.625525'
end: '2020-02-27 16:41:05.232705'
item:
```
From documentation, the osd pool creation command is :
```
ceph osd pool create {pool-name} {pg-num} [{pgp-num}] [replicated] \
[crush-rule-name] [expected-num-objects]
ceph osd pool create {pool-name} {pg-num} {pgp-num} erasure \
[erasure-code-profile] [crush-rule-name] [expected_num_objects]
```
it means we pass '1' (from item.type) as value for
`expected_num_objects` by default which is very likely not what we want.
Also, this commit modifies the default value when no `rule_name` is set
to use the existing variable `osd_pool_default_crush_rule`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1808495
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the user provides manually the key value for a specific keyring then
there's not valation on the content which could lead to unexpected
failures in the ceph_key module.
Closes: #5104
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the firewalld ansible module we need to be sure that the
python bindings are installed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since ansible 2.9 the firewalld task could not be used with service and
source in the same time anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running environment with OSDs having ID with more than 2 digits,
some tasks don't match the system units and therefore, playbook can fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1805643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This change introduces a new set of tasks to configure the
ceph dashboard backend and listen just on the mgr related
subnet (and not on '*'). For the same reason the proper
server address is added in both prometheus and alertmanger
systemd units.
This patch also adds the "dashboard_frontend_vip" parameter
to make sure we're able to support the HA model when multiple
grafana instances are deployed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792230
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
Since [1] if a rgw user already exists then the radosgw-admin user create
command will return an error instead of modifying the current user.
We were already doing separated tasks for create and get operation but
only for multisite configuration but it's not enough.
Instead we should do the get task first and depending on the result
execute the create.
This commit also adds missing run_once and delegate_to statement.
[1] https://github.com/ceph/ceph/commit/269e9b9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Allow SSL certificate & key contents to be written to the path
specified by radosgw_frontend_ssl_certificate. This permits a
certificate to be deployed & renewal of expired certificates
through ceph-ansible.
Signed-off-by: Sam Choraria <sam.choraria@bbc.co.uk>
Dimitri Savineau
Guillaume Abrioux
George Shuklin
Jonathan Rosser
Ali Maredia
Ansible Deployment User
Benoît Knecht
fmount
ianwatsonrh
abaird-rh
Paulo Matias
Matthew Vernon
petruha
Christian Berendt
Sam Choraria