Sometime /var/lib/ceph is mounted on a device so we won't be able to
remove it (device busy) so let's remove its content only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1615872
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a message for when PV creation fails.
This message alerts users that FS/GPT/RAID
signatures could still on the device and the
reason for the failures.
`wipefs -a $device` needs to be run to fix this issue.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Running 'osd set sortbitwise' when we detect a version 12 of Ceph is
wrong. When OSD are getting updated, even though the package is updated
they won't send their updated version (12) and will stick with 10 if the
command is not applied. So we have to check if OSD are sending a version
10 and then run the command to unlock the OSDs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600943
Signed-off-by: Sébastien Han <seb@redhat.com>
Recently we renamed the group_name for iscsi iscsigws where previously
it was named iscsi-gws. Existing deployments with a host file section
with iscsi-gws must continue to work.
This commit adds the old group name as a backoward compatility, no error
from Ansible should be expected, if the hostgroup is not found nothing
is played.
Close: https://bugzilla.redhat.com/show_bug.cgi?id=1619167
Signed-off-by: Sébastien Han <seb@redhat.com>
We were using var_files long ago when default variables were not in
ceph-defaults, now the role exists this is not need. Moreover having
these two var files added:
- roles/ceph-defaults/defaults/main.yml
- group_vars/all.yml
Will create collision and override necessary variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1555305
Signed-off-by: Sébastien Han <seb@redhat.com>
The copy module does in fact do variable interpolation so we do not need
to use the template module or keep a template in the source.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
If a user decides to to use the lv_vars.yml file then it should fail
silenty so that configuration can be picked up from other places.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The copy module will not expand the template and render the variables
included, so we must use template.
Creating a temp file and using it locally means that you must run the
playbook with sudo privledges, which I don't think we want to require.
This introduces a logfile_path variable that the user can use to control
where the logfile is written to, defaulting to the cwd.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
These playbooks create and tear down logical
volumes for OSD data on HDDs and for a bucket index and
journals on 1 NVMe device.
Users should follow the guidelines set in var/lv_vars.yaml
After the lv-create.yml playbook is run, output is
sent to /tmp/logfile.txt for copy and paste into
osds.yml
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Before running the upgrade, let's call systemd to collect unit names
instead of relaying on the device list. This is more accurate and fix
the osd_auto_discovery scenario too.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613626
Signed-off-by: Sébastien Han <seb@redhat.com>
In some case, use may mount a partition to /var/lib/ceph, and umount
it will be failure and no need to do so too.
Signed-off-by: Jeffrey Zhang <zhang.lei.fly@gmail.com>
upgrade RHCS 2 -> RHCS 3 will fail if cluster has still set
sortnibblewise,
it stay stuck on "TASK [waiting for clean pgs...]" as RHCS 3 osds will
not start if nibblewise is set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600943
Signed-off-by: Sébastien Han <seb@redhat.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
this is kind of follow up on what has been made in #2560.
See #2560 and #2553 for details.
Closes: #2708
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The rolling upgrades playbook should have norebalance flag set for
OSDs upgrades to wait only for recovery.
Fixes: #2657
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
Without the escalation, invocation from non-root
users with fail when accessing the rados config
object, or when attempting to log to /var/log
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1549004
Signed-off-by: Paul Cuzner <pcuzner@redhat.com>
When running ansible2.4-update_docker_cluster there is an issue on the
"get current fsid" task. The current task only works for
non-containerized deployment but will run all the time (even for
containerized). This currently results in the following error:
TASK [get current fsid] ********************************************************
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-luminous-ansible2.4-update_docker_cluster/rolling_update.yml:214
Tuesday 22 May 2018 22:48:32 +0000 (0:00:02.615) 0:11:01.035 ***********
fatal: [mgr0 -> mon0]: FAILED! => {
"changed": true,
"cmd": [
"ceph",
"--cluster",
"test",
"fsid"
],
"delta": "0:05:00.260674",
"end": "2018-05-22 22:53:34.555743",
"rc": 1,
"start": "2018-05-22 22:48:34.295069"
}
STDERR:
2018-05-22 22:48:34.495651 7f89482c6700 0 -- 192.168.17.10:0/1022712 >> 192.168.17.12:6789/0 pipe(0x7f8944067010 sd=4 :42654 s=1 pgs=0 cs=0 l=1 c=0x7f894405d510).connect protocol feature mismatch, my 83ffffffffffff < peer 481dff8eea4fffb missing 400000000000000
2018-05-22 22:48:34.495684 7f89482c6700 0 -- 192.168.17.10:0/1022712 >> 192.168.17.12:6789/0 pipe(0x7f8944067010 sd=4 :42654 s=1 pgs=0 cs=0 l=1 c=0x7f894405d510).fault
This is not really representative on the real error since the 'ceph' cli is available on that machine.
On other environments we will have something like "command not found: ceph".
Signed-off-by: Sébastien Han <seb@redhat.com>
A customer has been facing an issue when trying to override
`monitor_interface` in inventory host file.
In his use case, all nodes had the same interface for
`monitor_interface` name except one. Therefore, they tried to override
this variable for that node in the inventory host file but the
take-over-existing-cluster playbook was failing when trying to generate
the new ceph.conf file because of undefined variable.
Typical error:
```
fatal: [srvcto103cnodep01]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute u'ansible_bond0.15'"}
```
Including variables like this `include_vars: group_vars/all.yml` prevent
us from overriding anything in inventory host file because it
overwrites everything you would have defined in inventory.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1575915
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the transition from jewel non-container to container old ceph
units are disabled. ceph-disk can still remain in some cases and will
appear as 'loaded failed', this is not a problem although operators
might not like to see these units failing. That's why we remove them if
we find them.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1577846
Signed-off-by: Sébastien Han <seb@redhat.com>
In order to ensure there is no leftover after having purged a cluster,
we must wipe all partitions properly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1492242
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is some leftover on devices when purging osds because of a invalid
device list construction.
typical error:
```
changed: [osd3] => (item=/dev/sda sda1) => {
"changed": true,
"cmd": "# if the disk passed is a raw device AND the boot system disk\n if parted -s \"/dev/sda sda1\" print | grep -sq boot; then\n echo \"Looks like /dev/sda sda1 has a boot partition,\"\n echo \"if you want to delete specific partitions point to the partition instead of the raw device\"\n echo \"Do not use your system disk!\"\n exit 1\n fi\n echo sgdisk -Z \"/dev/sda sda1\"\n echo dd if=/dev/zero of=\"/dev/sda sda1\" bs=1M count=200\n echo udevadm settle --timeout=600",
"delta": "0:00:00.015188",
"end": "2018-05-16 12:41:40.408597",
"item": "/dev/sda sda1",
"rc": 0,
"start": "2018-05-16 12:41:40.393409"
}
STDOUT:
sgdisk -Z /dev/sda sda1
dd if=/dev/zero of=/dev/sda sda1 bs=1M count=200
udevadm settle --timeout=600
STDERR:
Error: Could not stat device /dev/sda sda1 - No such file or directory.
```
the devices list in the task `resolve parent device` isn't built
properly because the command used to resolve the parent device doesn't
return the expected output
eg:
```
changed: [osd3] => (item=/dev/sda1) => {
"changed": true,
"cmd": "echo /dev/$(lsblk -no pkname \"/dev/sda1\")",
"delta": "0:00:00.013634",
"end": "2018-05-16 12:41:09.068166",
"item": "/dev/sda1",
"rc": 0,
"start": "2018-05-16 12:41:09.054532"
}
STDOUT:
/dev/sda sda1
```
For instance, it will result with a devices list like:
`['/dev/sda sda1', '/dev/sdb', '/dev/sdc sdc1']`
where we expect to have:
`['/dev/sda', '/dev/sdb', '/dev/sdc']`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1492242
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During a minor update from a jewel to a higher jewel version (10.2.9 to
10.2.10 for example) osd flags don't get applied because they were done
in the mgr section which is skipped in jewel since this daemons does not
exist.
Moving the set flag section after all the mons have been updated solves
that problem.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1548071
Co-authored-by: Tomas Petr <tpetr@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
the role `ceph-mgr` that is played later in the playbook fails because
the destination path for the fetched keys is wrong.
This patch fix the destination path used in the task `fetch ceph mgr
key(s)` so there is no mismatch.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
{{ fsid }} points to {{ cluster_uuid.stdout }} which is not defined in
this part of the rolling_update playbook.
Since we need to call {{ fsid }} we must get the fsid and register it to
`cluster_uuid`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Until all the mons haven't been updated to Luminous, there is no way to
create a key. So we should do the key creation in the mon role only if
we are not part of an update.
If we are then the key creation is done after the mons upgrade to
Luminous.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Sébastien Han <seb@redhat.com>
In addition to b324c17 this commit fix the ceph uid for osd role in the
switch from non containerized to containerized playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we don't do this, umounting devices declared like this
/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001
will fail like:
umount: /dev/disk/by-id/ata-QEMU_HARDDISK_QM000011: mountpoint not found
Since we append '1' (partition 1), this won't work.
So we need to resolved the link to get something like /dev/sdb and then
append 1 to /dev/sdb1
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Now if the service name contains nvme we know we need to remove the last
2 character instead of 1.
If nvme then osd_to_kill_disks is nvme0n1, we need nvme0
If ssd or hdd then osd_to_kill_disks is sda1, we need sda
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1561456
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Ali Maredia
Andrew Schoen
Neha Ojha
Jeffrey Zhang
Guillaume Abrioux
Vishal Kanaujia
Paul Cuzner