This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Only rbd-target-api and rbd-target-gw were started/enabled for non
containerized deployment.
The issue doesn't happen with containerized setup.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The library directory that contain the custom ceph modules in present
in the ceph-ansible root directory.
All igw_* mocules are already present there so we don't need the one
present in roles/ceph-iscsi-gw/library.
Also remove the associated spec file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Typical error:
```
fatal: [iscsi-gw0]: FAILED! =>
msg: 'an error occurred while trying to read the file ''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'': [Errno 13] Permission denied: b''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'''
```
`become: True` is not needed on the following task:
`copy crt file(s) to gateway nodes`.
Since it's already set in the main playbook (site.yml/site-container.yml)
The thing is that the files get generated in the 'fetch_directory' with
root user because there is a 'delegate_to' + we run the playbook with
`become: True` (from main playbook).
The idea here is to create files under ansible user so we can open them
later to copy them on the remote machine.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the current user on the controller node, might not have the
permission to read the TLS certificate and related files, copy these
files to the Ceph nodes as root user.
Fixes: https://github.com/ceph/ceph-ansible/issues/3465
Signed-off-by: Rishabh Dave <ridave@redhat.com>
During its initialisation both rbd-target-api and rbd-target-gw try to
open /dev/log for their syslog handler. If the device is not present the
service fails to start. Thus expose /dev/log from the host in the
container solves that problem.
Signed-off-by: Sébastien Han <seb@redhat.com>
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
description = 'Use `when: var` rather than `when: var != ""` (or ' \ 'conversely `when: not var` rather than `when: var == ""`)'
Signed-off-by: Sébastien Han <seb@redhat.com>
Update the meta with the relavant support such as:
* ansible version: min 2.4
* distro supported (tested on) centos 7
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not run the linter for these 3:
* we use latest for pip docker-py package
* for ssl keys this is a false positive since the inital command is a
'shell' it'll always change
* for keystone, we must use shell since the with_items contains pipes
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
Fixes the deprecation warning:
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|search` use `result is search`.
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
The commit:
commit 1164cdc002
Author: Guillaume Abrioux <gabrioux@redhat.com>
Date: Thu Aug 2 11:58:47 2018 +0200
iscsigw: install ceph-iscsi-cli package
installs the cli package but does not start and enable the
rbd-target-api daemon needed for gwcli to communicate with the igw
nodes. This patch just enables and starts it for the non-container
setup. The container setup is already doing this.
This fixes bz https://bugzilla.redhat.com/show_bug.cgi?id=1613963
Signed-off-by: Mike Christie <mchristi@redhat.com>
Instead of failing the entire purge operation when the rbd command fails
just log an error. This will allow the higher level target and config
cleanup to complete, and the user only has to manually delete the rbd
images.
Signed-off-by: Mike Christie <mchristi@redhat.com>
We were not passing in the ceph conf info into the rbd image removal
command, so if the clustername was not the default igw purge would fail
due to the rbd rm command failing.
This just fixes the bug by passing in the ceph conf info which has the
clustername to use.
This fixes Red Hat bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1601949
Signed-off-by: Mike Christie <mchristi@redhat.com>
When using a module there is no need to apply this Ansible option. The
module will handle the idempotency on its own. So the module decides
wether or not the task has changed during the execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
We now have the ability to deploy a containerized version of ceph-iscsi.
The result is similar to the non-containerized version, you simply have
3 containers running for the following services:
* rbd-target-api
* rbd-target-gw
* tcmu-runner
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508144
Signed-off-by: Sébastien Han <seb@redhat.com>
trying to mask target when `/etc/systemd/system/target.service` doesn't
exist seems to be a bug.
There is no need to mask a unit file which doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch, the certificates where being generated on a single
node only (because of the run_once: true). Thus certificates were not
distributed on all the gateway nodes.
This would require a second ansible run to work. This patches fix the
creation and keys's distribution on all the nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1540845
Signed-off-by: Sébastien Han <seb@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Rishabh Dave
Sébastien Han
Mike Christie
Jason Dillaman
Neha Ojha
Noah Watkins
George Shuklin
Major Hayden