Merge ntp_debian.yml and ntp_rpm.yml into one (the new file is called
setup_ntp.yml) since they are almost identical. Also avoid repetition
of the common setup step for ntpd and chronyd services.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Since the current user on the controller node, might not have the
permission to read the TLS certificate and related files, copy these
files to the Ceph nodes as root user.
Fixes: https://github.com/ceph/ceph-ansible/issues/3465
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Make linter happy and add more robustness to remote tasks by retrying 3
times (the default) before failing.
Signed-off-by: Sébastien Han <seb@redhat.com>
These aliases have led to several issues making believe that ceph
binaries are actually present on the host when running the command.
However it wasn't explicit that the commands were only ran inside a
container.
It has brought to much confusion so we decided to remove them.
Closes: https://github.com/ceph/ceph-ansible/issues/3445
Signed-off-by: Sébastien Han <seb@redhat.com>
sometimes we play the whole role `ceph-defaults` just to access the
default value of some variables. It means we play the `facts.yml` part
in this role while it's not desired. Splitting this role will speedup
the playbook.
Closes: #3282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We want to test podman on f29 non-atomic, atomic is not a hard
requirement. However, if you want to get podman then you will have to
install it first before running the playbook.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit removes the default module, so ceph-ansible does not enable
any manager module.
To enable a module you need to set a value to 'ceph_mgr_modules', you
can pass a list of modules like this:
ceph_mgr_modules:
- status
- dashboard
Signed-off-by: Sébastien Han <seb@redhat.com>
Json is a type structure which is always typed as a string, where before
this we were declaring a dict, which is not a json valid structure.
Signed-off-by: Sébastien Han <seb@redhat.com>
The code is now able (again) to start osds that where configured with
ceph-disk on a non-container scenario.
Closes: https://github.com/ceph/ceph-ansible/issues/3388
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 452069cb3a)
Applying and passing the OSD_BLUESTORE/FILESTORE on the fly is wrong for
existing clusters as their config will be changed.
Typically, if an OSD was prepared with ceph-disk on filestore and we
change the default objectstore to bluestore, the activation will fail.
The flag osd_objectstore should only be used for the preparation, not
activation. The activate in this case detects the osd objecstore which
prevents failures like the one described above.
Signed-off-by: Sébastien Han <seb@redhat.com>
If an existing cluster runs this config, and has ceph-disk OSD, the
`expose_partitions` won't be expected by jinja since it's inside the
'old' if. We need it as part of the osd_scenario != 'lvm' condition.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1640273
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit unifies the container and non-container code, which in the
meantime gives use the ability to deploy N mon container at the same
time without having to serialized the deployment. This will drastically
reduces the time needed to bootstrap the cluster.
Note, this is only possible since Nautilus because the monitors are
bootstrap the initial keys on their own once they reach quorum. In the
Nautilus version of the ceph-container mon, we stopped generating the
keys 'manually' from inside the container, for more detail see: https://github.com/ceph/ceph-container/pull/1238
Signed-off-by: Sébastien Han <seb@redhat.com>
When collocating mon and mgr, the mgr container will attempt to create
its own key since it has the admin key at its disposal. Also at this
point there is nothing to fetch since the key is not created by the
mons, as mentionned above the mgr creates the key on its own.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will speed up the deployment and also deploy mon and mgr collocated
just as recommended.
This won't prevent you of adding more and dedicaded machines for mgr if
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the first iteration, the command won't return anything, or can
simply fail and might not return a valid json structure. Ansible will
fail parsing it in the filter `from_json` so let's default that variable
to empty dictionary.
Signed-off-by: Sébastien Han <seb@redhat.com>
This removes a bit of unnecessary code, the check was always wrong
because of the condition 'not ceph_current_status.get('rc', 1) == 0'
It will never match since `Not` is used for bool and we are checking for
an rc.
Also, even though the check would work, this will be a major blocker for
a complete meltdown. If the whole platform is shutdown then nothing will
be up but files will be present, so this check is definitely wrong.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is false, `./defaults/main.yml` is not supposed to be modified
directly. groups_vars a/o host_vars should always be preferred.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will fix the following yamllint warning:
Variables should have spaces after {{ and before }}
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is not needed to play these tasks on nodes that are not in rgw
group.
Always playing this code makes `shrink_mon.yml` failing.
Typical error:
```
TASK [ceph-defaults : set_fact _radosgw_address to radosgw_interface - ipv4] ***
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-dev-shrink_mon/roles/ceph-defaults/tasks/set_radosgw_address.yml:21
Thursday 22 November 2018 12:34:51 +0000 (0:00:00.154) 0:00:12.371 *****
fatal: [localhost]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_eth1'
```
Indeed, `radosgw_interface` is the network interface on rgw only. It is
expected that this same interface doesn't exist on `localhost`, so, when
running `shrink_mon.yml`, the role `ceph-defaults` is called in
`hosts: localhost` and causes the playbook to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It seems Atomic 7.5 has podman already, however this is an old version
(0.4). The podman integration is targetting RHEL 8, so Fedora is
currently the closest to that.
Signed-off-by: Sébastien Han <seb@redhat.com>
During its initialisation both rbd-target-api and rbd-target-gw try to
open /dev/log for their syslog handler. If the device is not present the
service fails to start. Thus expose /dev/log from the host in the
container solves that problem.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since 84fcf4639140c390a7f1fcd790ba190503713f86 we now use the container
binary cli to create ceph keys instead of creating a container and
'docker execing' into it.
Signed-off-by: Sébastien Han <seb@redhat.com>
In order to be able to retrieve udev information, we must expose its
socket. As per, https://github.com/ceph/ceph/pull/25201 ceph-volume will
start consuming udev output.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is to add a granularity level.
We can have ceph specific variables that user shouldn't have to change
here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph.conf doesn't accept float value.
Typical error seen:
```
$ sudo ceph daemon osd.2 config get osd_memory_target
Can't get admin socket path: unable to get conf option admin_socket for osd.2:
parse error setting 'osd_memory_target' to '7823740108,8' (strict_si_cast:
unit prefix not recognized)
```
This commit ensures the value inserted in ceph.conf will be an integer.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It is safer to use the list filter than the keys() method since the keys
method does have some interoperability issues between python2 and
python3 based ansible/jinja.
Signed-off-by: Boris Ranto <branto@redhat.com>
If you use python3 based ansible then keys() returns a dict_keys object,
not a list of keys. This breaks the installation on such a system. Using
the list filter provides a more robust solution that should work on both
python2 and python3 based ansible. You can find some more information
about the issue, here:
https://github.com/ansible/ansible/issues/19514
Signed-off-by: Boris Ranto <branto@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
This error was introduced in the recent refactor of ceph-docker-common
in https://github.com/ceph/ceph-ansible/pull/3251. However, the Ansible
galaxy linter is not happy about it and fails importing the role.
Removing this since it's not used anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
if firewalld.service systemd unit is masked, the handler will fail when
trying to restart it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `ceph-volume` introduction, there is no need to split those tasks.
Let's refact this part of the code so it's clearer.
By the way, this was breaking rolling_update.yml when `openstack_config:
true` playbook because nothing ensured OSDs were started in ceph-osd role (In
`openstack_config.yml` there is a check ensuring all OSD are UP which was
obviously failing) and resulted with OSDs on the last OSD node not started
anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Those tasks aren't needed in docker-common since the introduction of
`ceph-infra` role. They are duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this is already done in ceph-defaults, there is no need to have this
check in ceph-docker-common.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this fact is already set in ceph-defaults, there is no need to set it
again in ceph-docker-common
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of looping over a list of packages or repeating the task
separately for different packages, pass the list of packages to the
task performing package management.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
The firewall setup for igw is not getting setup because iscsi_group_name
does not it exist. It should be iscsi_gw_group_name.
Signed-off-by: Mike Christie <mchristi@redhat.com>
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
description = 'Use `when: var` rather than `when: var != ""` (or ' \ 'conversely `when: not var` rather than `when: var == ""`)'
Signed-off-by: Sébastien Han <seb@redhat.com>
The use of a handler meant that the cache would be updated at the very
end of the play, which doesn't work when adding a development repo and
trying to install right after it. This mostly reverts
53cdddf886 without an actual `git revert`
because that caused other conflicts.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Update the meta with the relavant support such as:
* ansible version: min 2.4
* distro supported (tested on) centos 7
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not run the linter for these 3:
* we use latest for pip docker-py package
* for ssl keys this is a false positive since the inital command is a
'shell' it'll always change
* for keystone, we must use shell since the with_items contains pipes
Signed-off-by: Sébastien Han <seb@redhat.com>
Calling command should have changed_when false otherwise each time it
runs it will show as 'changed' and this is irrelevant.
Commands should not change things if nothing needs doing
Signed-off-by: Sébastien Han <seb@redhat.com>
since the jinja logic has been moved into ansible task, we can simply
this part of the code and use `_current_monitor_address`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
So we don't have to loop over `_monitor_addresses` when we need the
monitor address of the current node being played.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
using consecutive set_fact in the playbook instead of complex jinja syntax
makes ceph.conf.j2 more readable.
By the way, jinja can be painful to debug at some point.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Latest ansible version at the moment is 2.7
We should explicitly require 2.7 only on master branch.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's test ceph-ansible master against ansible 2.7 to catch early any
potential issue with this ansible version.
Closes: #3148
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
run commands on containers when containerized deployments.
(At the moment, all commands are run on the host only)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `rgw_multisite_endpoint_addr` has a default value to
`{{ ansible_fqdn }}`, it shouldn't be mandatory to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
we ensure that firewalld is installed and running before adding any
rule. This has no sense anymore not to reload firewalld once the rule
are added.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The playbook has various improvements:
* run ceph-validate role before doing anything
* run ceph-fetch-keys only on the first monitor of the inventory list
* set noup flag so PGs get distributed once all the new OSDs have been
added to the cluster and unset it when they are up and running
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits simplies the usage of the ceph-fetch-keys role. The role
now has a nicer way to find various ceph keys and fetch them on the
ansible server.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently a throw-away container is built to run ceph client
commands to setup users, pools & auth keys. This utilises
the same base ceph container which has all the ceph services
inside it.
This PR allows the use of a separate container if the deployer
wishes - but defaults to use the same full ceph container.
This can be used for different architectures or distributions,
which may support the the Ceph client, but not Ceph server,
and allows the deployer to build and specify a separate client
container if need be.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
a non skipped task won't have the `skipped` attribute, so `start
firewalld` task will complain about that.
Indeed, `skipped` and `rc` attributes won't exist since the first task
`check firewalld installation on redhat or suse` won't be skipped in
case of non-containerized deployment.
Fixes: #3236
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Liberty is no longer available in the UCA. The last available release there
is currently Queens.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
`ceph_osd_container_stat` might not be set on other osd node.
We must ensure we are on the last node before trying to evaluate
`ceph_osd_container_stat`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of now, we should no longer support Jewel in ceph-ansible.
The latest ceph-ansible release supporting Jewel is `stable-3.1`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit does a couple of things:
* Avoid code duplication
* Clarify the code
* add more unit tests
* add myself to the author of the module
Signed-off-by: Sébastien Han <seb@redhat.com>
This task was created for ceph-disk based deployments so it's not needed
when osd are prepared with ceph-volume.
Signed-off-by: Sébastien Han <seb@redhat.com>
The restart script wasn't working with the current new addition of
ceph-volume in container where now OSDs have the OSD id name in the
container name.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now that the container is named ceph-osd@<id> looking for something that
contains a host is not necessary. This is also backward compatible as it
will continue to match container names with hostname in them.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't need to pass the device and discover the OSD ID. We have a
task that gathers all the OSD ID present on that machine, so we simply
re-use them and activate them. This also handles the situation when you
have multiple OSDs running on the same device.
Signed-off-by: Sébastien Han <seb@redhat.com>
Rishabh Dave
Kai Wembacher
jtudelag
Sébastien Han
Guillaume Abrioux
Noah Watkins
Christian Berendt
Boris Ranto
Neha Ojha
Mike Christie
Jason Dillaman
Alfredo Deza
Ali Maredia
Andy McCrae
Nan Li