running an external ceph cluster deployment with (obviously) no
monitors defined in inventory breaks with an undefined error because
`_monitor_addresses` never get defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1707460
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add code in ceph-mgr for creating a keyring for manager in so that
managers can be deployed on a separate node too.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Except for some corner case, it's not correct to access some other
node's copy of variable docker_exec_cmd. Therefore replace
"hostvars[groups[mon_group_name][0]]['docker_exec_cmd']" by
"docker_exec_cmd".
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Adds "check_mode: no" to commands which register cluster state in a
variable and don't modify anything. These commands have to run in order
to support running the playbook in check mode.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
In containerized deployment the default mds cpu quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695850
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In containerized deployment the default osd cpu quota is too low
for production environment using NVMe devices.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695880
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Only rbd-target-api and rbd-target-gw were started/enabled for non
containerized deployment.
The issue doesn't happen with containerized setup.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Until now it was not possible to install a specific container package
because it was somehow hardcoded.
This patch allows to override the container package name (docker.io
vs docker-ce) and refacts the package installation. This could be
achieve via the container_package_name variable.
Instead of using one task per distribution we can set the package and
service name in vars. This allows to have a unified package task.
Also refactorize the debian_prerequisites tasks because the content
was outdated.
https://docs.docker.com/install/linux/docker-ce/debian/https://docs.docker.com/install/linux/docker-ce/ubuntu/Resolves: #3609
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this task has nothing to do in stable-4.0 and after.
Let's remove it since stable-4.0 and after aren't intended to deploy
luminous.
Closes: #3873
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
1/ The OSD already supports cpuset to be used for containerized deployments
through the use of the ceph_osd_docker_cpuset_cpus variable. This adds similar
support to the RGW service for containerized deployments by setting a new
variable named ceph_rgw_docker_cpuset_cpus. Like the OSD, there are times where
using distinct cores has advantages over using the CFS in kernel scheduler.
ceph_rgw_docker_cpuset_cpus accepts a comma delimited set of CPU ids
2/ Add support for specifying --cpuset-mem variable to restrict the cgroup's memory
allocations to a particular numa node, which should typically correspond with
the cpu ids of that numa node that were provided with --cpuset-cpus. To ensure
the correct cpu ids are used one can run `numactl --hardware` to list the nodes
and which cpu ids correspond to each.
Signed-off-by: Kyle Bader <kbader@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Since Nautilus there's mgr extra modules not present in ceph-mgr
package but in dedicated packages.
Resolves: #3860
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The library directory that contain the custom ceph modules in present
in the ceph-ansible root directory.
All igw_* mocules are already present there so we don't need the one
present in roles/ceph-iscsi-gw/library.
Also remove the associated spec file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When adding a new monitor, we must reuse the existing initial monitor
keyring. Otherwise, the new monitor will issue its 'mkfs' with a new
monitor keyring and it will result with a mismatch between them. The
new monitor will be unable to join the quorum in the end.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
This variable was related to ceph-disk scenarios.
Since we are entirely dropping ceph-disk support as of stable-4.0, let's
remove this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
osd_scenario has become obsolete and defaults to lvm. With lvm there is
no such things has collocated and non-collocated.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to use the cephfs variable for the application pool
name because it's always cephfs.
If the cephfs variable is set to something else than the default
value it will break the appplication pool task.
Resolves: #3790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
docker daemon is automatically started during package installation
but the service isn't enabled on boot.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
When using monitor_address_block or radosgw_address_block variables
to configure the mon/rgw address we're getting the first ip address
from the ansible facts present in that cidr.
When there's VIP on that network the first filter could return the
wrong value.
This seems to affect only IPv6 setup because the VIP addresses are
added to the ansible facts at the beginning of the list. This is the
opposite (at the end) when using IPv4.
This causes the mon/rgw processes to bind on the VIP address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680155
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The path of the RGW environment file (in the /var/lib/ceph/radosgw/
directory) depends on the Ceph clustername. It was not taken into
account in the Ansible role `ceph-rgw`.
Signed-off-by: flaf <francois.lafont.1978@gmail.com>
When mgrs are implicitly collocated on monitors (no mgrs in mgrs group).
That include was skipped because of this condition :
`inventory_hostname == groups[mgr_group_name][0]`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
before managing mgr modules, we must ensure all mgr are available
otherwise we can hit failure like following:
```
stdout:Error ENOENT: all mgr daemons do not support module 'restful', pass --force to force enablement
```
It happens because all mgr are not yet available when trying to manage
with mgr modules.
Closes: #3100
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
According to rdo testing https://review.rdoproject.org/r/#/c/18721
a check on the output of the ceph_health value is added to
allow the playbook to make several attempts (according to the
retry/delay variables) when waiting the cluster quorum or
when the container bootstrap is not ended.
It avoids the failure of the command execution when it doesn't
receive a valid json object to decode (because cluster is too
slow to boostrap compared to ceph-ansible task execution).
Signed-off-by: fpantano <fpantano@redhat.com>
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Similar to #3658
Since there's too many changes between master and stable branches let's
commit directly in each branches instead of trying to backport this
commit.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When installing python-minimal on Ubuntu bionic, this will add the
/usr/bin/python symlink to the default python interpreter.
On bionic, this isn't python2 but python3.
$ /usr/bin/python --version
Python 3.6.7
The python docker library is only installed for python2 which causes
issues when running the purge-docker-cluster playbook. This playbook
uses the ansible docker modules and requires to have python bindings
installed on the remote host.
Without the bindings we can see python error reported by the docker
module.
msg: Failed to import docker or docker-py - No module named 'docker'.
Try `pip install docker` or `pip install docker-py` (Python 2.6)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
sometimes those tasks might fail because of a timeout.
I've been facing this several times in the CI, adding this retry might
help and won't hurt in any case.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, the initial keyrings list has changed, it means when
upgrading from Luminous or Mimic, it is expected there's a mismatch
between what is found on the cluster and the expected initial keyring
list hardcoded in ceph_key module. We shouldn't fail when upgrading to
nautilus.
str_to_bool() took from ceph-volume.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
rolling_update playbook already takes care of stopping/starting services
during the sequence. There's no need to trigger potential unwanted
services restart.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using osd_scenario lvm, we never check if the lvm2 package is
present on the host.
When using containerized deployment and docker on CentOS/RedHat this
package will be automatically installed as a dependency but not for
Ubuntu distribution.
OSD deployed via ceph-volume require the lvmetad.socket to be active
and running.
Resolves: #3728
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since all files in container image have moved to `/opt/ceph-container`
this check must look for new AND the old path so it's backward
compatible. Otherwise it could end up by templating an inconsistent
`ceph-osd-run.sh`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using monitor_address_block to determine the ip address of the
monitor node, we need an ip address available in that cidr to be
present in the ansible facts (ansible_all_ipv[46]_addresses).
Currently we don't check if there's an ip address available during
the ceph-validate role.
As a result, the ceph-config role fails due to an empty list during
ceph.conf template creation but the error isn't explicit.
TASK [ceph-config : generate ceph.conf configuration file] *****
fatal: [0]: FAILED! => {"msg": "No first item, sequence was empty."}
With this patch we will fail before the ceph deployment with an
explicit failure message.
Resolves: rhbz#1673687
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using community repository we need to set the priority on the
ceph repositories because we could have some conflict with EPEL
packages.
In order to set the priority on the ceph repositories, we need to
install the yum-plugin-priorities package.
http://docs.ceph.com/docs/master/install/get-packages/#rpm-packages
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the task will be delegated to mons[0] for all mgr hosts, so we can just run it on the first host and have the same effect.
Signed-off-by: wumingqiao <wumingqiao@beyondcent.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using subscription-manager with command module we can use
the rhsm_repository ansible module.
This module already uses repos list feature to determine if a
repository is enabled or not. That way this module is idempotent so
we don't need changed_when: false anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph stable community repository only enables the basearch
packages url.
Adding the noarch url because starting with nautilus release, some
packages are added there and useful for mgr or grafana.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After b8d580b and e9e5d5a we could have either item.min_size or
osd_pool_default_min_size using string instead of int causing the
condition to be true when it's false.
As a result, the task could try to set the pool min_size value to
0 which leads to:
Error EINVAL: pool min_size must be between 1 and 1
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b8d580b3f4 introduced a bug when
`min_size` isn't set (default to 0).
Typical error:
```
Error EINVAL: pool min_size must be between 1 and 1
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The following lint issues have been resolved:
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:2
[305] Use shell only when shell functionality is required
/home/travis/build/ceph/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:47
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:2
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:7
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:14
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:19
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:24
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Tuned name of a task and error message to make it more user understandable
Fixes BZ 1648168 - ceph-validate : devices are not validated in non-collocated and lvm_batch scenario
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1648168
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
The "get osd ids" statement only registers the osd_ids_non_container variable. Running "ls /var/lib/ceph/osd/ | sed 's/.*-//'" should never produce a change on the system. Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Referring to BZ#1683290, as dsavineau suggests, being this
bug tripleO specific, removed the ubuntu section and removed
useless mountpoints.
Signed-off-by: fpantano <fpantano@redhat.com>
There's no need to set the client_admin_ceph_authtool_cap variable
via a set_fact task.
Instead we can set this in the role defaults.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The administrator keyring needs full capabilities on mds like mon,
osd and mgr.
Whithout this, the client.admin key won't be able to run commands
against mds (like ceph tell mds.0 session ls)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1672878
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Set directories to 755 and files to 644 to /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} recursively instead of setting files and directories to 755 recursively. The ceph mon process writes files to this path with permissions 644. This update stops ansible from updating the permissions in /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} every time ceph mon writes a file and increases idempotency.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
the previous approach was wrong.
checking if `item.key` is in `osd_auto_discovery_exclude` (`['dm-',
'loop']`) is incorrect because it will obviously not match. Therefore,
the condition will return `True` whatever the device we are checking.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new `osd_auto_discovery_exclude` to give the possibility of
excluding some devices in auto_discovery scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to restart firewalld service when a new rule is
added due to the usage of the immediate flag.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We shouldn't reset `ceph_release` with `ceph_stable_release` when
`ceph_repository` is `rhcs`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1645379
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
introduce two new variables to make the check that 'wait for all osd to
be up' configurable.
It's possible that for some deployments, OSDs can take longer to be seen
as UP and IN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1676763
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The existing task checks that the number of OSDs is equal to the number of up OSDs before continuing.
The problem is that if none of the OSDs have been discovered yet, the task will exit immediately and subsequent pool creation will fail (num_osds = 0, num_up_osds = 0).
This is related to Bugzilla 1578086.
In this change, we also check that at least one OSD is present. In our testing, this results in the task correctly waiting for all OSDs to come up before continuing.
Signed-off-by: David Waiting <david_waiting@comcast.com>
This reverts commit bb2bbeb941.
Looks like when not passing `--pid=host` we are facing some issues when
deploying more than 2 OSDs in containerized environment.
At the moment, we are still troubleshooting this issue but we prefer to
revert this commit so it doesn't block any PR in the CI.
As soon as we have a fix; we will push a new PR to remove `--pid=host`
(a revert of revert...)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
is_atomic is defined in ceph-facts or very early in main playbook.
In non containerized deployment, is_atomic is only set in ceph-facts
which is played after ceph-validate.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
instead of using `RuntimeDirectory` parameter in systemd unit files,
let's use a systemd `tmpfiles.d` to ensure `/run/ceph`.
Explanation:
`podman` doesn't create the `/var/run/ceph` if it doesn't exist the time
where the container is run while `docker` used to create it.
In case of `switch_to_containers` scenario, `/run/ceph` gets created by
a tmpfiles.d systemd file; when switching to containers, the systemd
unit file complains because `/run/ceph` already exists
The better fix would be to ensure `/usr/lib/tmpfiles.d/ceph-common.conf`
is removed and only rely on `RuntimeDirectory` from systemd unit file parameter
but we come from a non-containerized environment which is already running,
it means `/run/ceph` is already created and when starting the unit to
start the container, systemd will still complain and we can't simply
remove the directory if daemons are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-mon` tries to redeploy monitors because it assumes it was not yet
deployed since `mon_socket_stat` and `ceph_mon_container_stat` are
undefined (indeed, we stop the daemon before calling `ceph-mon` in the
switch_to_containers playbook).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since it's already confusing whether ntp_daemon_type should be "ntp" or
"ntpd", fix the mistake in the title of the task that aborts if
ntp_daemon_type is set to "ntpd" and OS being used is Atomic.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Since Atomic doesn't allow any installations and NTPd is not present
on Atomic image we are using, abort when ntp_daemon_type is set to ntpd.
https://github.com/ceph/ceph-ansible/issues/3572
Signed-off-by: Rishabh Dave <ridave@redhat.com>
167 is the ceph uid for Red Hat based system, thus trying to deploy a
monitor on Debian fail since the ceph user id on that system is 64045.
This commit uses the ceph_uid variable which contains the right uid
based on system/container detection.
Closes: https://github.com/ceph/ceph-ansible/issues/3589
Signed-off-by: Sébastien Han <seb@redhat.com>
When {{omit}} is concatenated with another string, it expands to something
like __omit_place_holder__63eea0d96dd6ed867b95405e11d87dddf61f448d.
However, in these use-cases we need an empty string.
Regression introduced in d53f55e807.
Signed-off-by: Leah Neukirchen <leah.neukirchen@mayflower.de>
The task setup chronyd called the handler disable chronyd, which of
course defeats the purpose.
Changing the task to disable ntpd instead fixes the issue of chronyd
being disabled after it got enabled.
Fixes: #3582
Signed-off-by: Patrick C. F. Ernzer pcfe@redhat.com
Typical error:
```
fatal: [iscsi-gw0]: FAILED! =>
msg: 'an error occurred while trying to read the file ''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'': [Errno 13] Permission denied: b''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'''
```
`become: True` is not needed on the following task:
`copy crt file(s) to gateway nodes`.
Since it's already set in the main playbook (site.yml/site-container.yml)
The thing is that the files get generated in the 'fetch_directory' with
root user because there is a 'delegate_to' + we run the playbook with
`become: True` (from main playbook).
The idea here is to create files under ansible user so we can open them
later to copy them on the remote machine.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With 'podman version 1.0.0' on RHEL8 beta the 'get ceph version' and
'ceph monitor mkfs' commands fail [1] with "error configuring network
namespace for container Missing CNI default network".
When net=host is added these errors are resolved. net=host is used in
many other calls (grep -R net=host | wc -l --> 38).
Fixes: #3561
Signed-off-by: John Fulton <fulton@redhat.com>
(cherry picked from commit 410abd7745)
/var/run/ceph resides in a non persistent filesystem (tmpfs)
After a reboot, all daemons won't start because this directory will be
missing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
without this, the command `ceph-volume lvm list --format json` hangs and
takes a very long time to complete.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- also add `--foreground` which seems to fix some issue we are facing when
using timeout with `podman`.
- use this fact in the `is ceph running already?` task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The restart_osd_daemon.sh generated from the j2 template
contains a python call which uses 'print x' instead of
'print(x)'. Add the missing parentheses to make this call
compatible with both 2 and 3.
Also add parentheses to other python print calls found
in roles/ceph-client/defaults/main.yml and
infrastructure-playbooks/cluster-os-migration.yml.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1671721
Signed-off-by: John Fulton <fulton@redhat.com>
This task used to live in ceph-osd, but we need it defined here to that
ceph-config can use it when trying to determine the number of osds.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
If user sets "docker_pull_timeout: '0'" then do not use the
timeout command when running podman/docker pull. Also, use
"timeout -s KILL"; without KILL, podman on RHEL8 beta does
not timeout and deployment can hang.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1670625
Signed-off-by: John Fulton <fulton@redhat.com>
nfs-ganesha v2.5 and 2.6 have hit EOL. Install nfs-ganesha v2.7
stable that is currently being maintained.
Signed-off-by: Ramana Raja <rraja@redhat.com>
when `ceph_origin` is set to `'repository'` and `ceph_repository` to
`'community'` we need to ensure `ceph_release` reflect
`ceph_stable_release`.
4a3f180f9d simply removed the override
while it should just have to be run only when the condition mentioned
above is satisfied.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph_release` is set in `ceph-container-common` but this role is
played only on first node for clients, this means ceph-config will fail
on all client nodes except the first one.
This commit ensure ceph_release is set for all client nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling msgr2 style declaration for Nautilus and above. Prior releases
will keep the right syntax.
When upgrading from Mimic to Nautilus we must maintain something in the
form of:
mon_host = [v1:127.0.0.1:6789/0,v2:127.0.0.1:3300/0]
Signed-off-by: Sébastien Han <seb@redhat.com>
You can now use 'ceph_mon_container_listen_port' to change the port the
monitor will listen on.
Setting the default to 3300 (assigned by IANA) since Nautilus has released the messenger2
transport protocol.
Signed-off-by: Sébastien Han <seb@redhat.com>
This reverts commit ee08d1f89a which was
mostly to workaround a bug in ceph@master. Now, ceph@master is fixed so
reverting this. Thanks to https://github.com/ceph/ceph/pull/25900
Signed-off-by: Sébastien Han <seb@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This part of the code is not needed since ceph-ansible@master is
intended to deploy ceph@master only.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This condition is useless and it's also creating issues we don't see in
our CI. ceph_release is set by either ceph-common or ceph-docker-common
so let's keep it this way.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1645379
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Somewhat something changed with the introduction of msg2 and we have to
add each node as a peer so the monitors can form a quorum. This might be
due to our CI environment, although adding this is completly harmless
and solves monitors not being able to form quorum.
It seems that the initial monitor map wasn't containing the right
information about the peers (addresses like 0.0.0.0/0r1, for each rank.
Signed-off-by: Sébastien Han <seb@redhat.com>
The nfs_ganesha_dev_apt_repo variable was set incorrect in task
"fetch nfs-ganesha development repository"
Signed-off-by: Bruceforce <Bruceforce@users.noreply.github.com>
If we don't copy the key after the package install the directory /var/lib/ceph/bootstrap-rbd-mirror
will not exist and the copy will fail.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't need to create the directories on non-containers, they are
created by the packages.
Closes: https://github.com/ceph/ceph-ansible/issues/3430
Signed-off-by: Sébastien Han <seb@redhat.com>
When one of the currently supported NTP services has been set up,
disable rest of the NTP services on Ceph nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Merge ntp_debian.yml and ntp_rpm.yml into one (the new file is called
setup_ntp.yml) since they are almost identical. Also avoid repetition
of the common setup step for ntpd and chronyd services.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Since the current user on the controller node, might not have the
permission to read the TLS certificate and related files, copy these
files to the Ceph nodes as root user.
Fixes: https://github.com/ceph/ceph-ansible/issues/3465
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Guillaume Abrioux
Rishabh Dave
Gaudenz Steinlin
Dimitri Savineau
Radu Toader
Kyle Bader
Andrew Schoen
Sébastien Han
Matthew Vernon
François Lafont
Ali Maredia
fpantano
wumingqiao
Kevin Coakley
VasishtaShastry
ToprHarley
Patrick Donnelly
David Waiting
Leah Neukirchen
Patrick C. F. Ernzer
John Fulton
Ramana Raja
Zack Cerza
guihecheng
Bruceforce
Kai Wembacher
jtudelag