It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
We already do that in the other systemd templates (mgr, mds, etc..)
and would present to add workaround in other orchestration tool.
This change is for containerized deployment only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1882724
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit changes the bind mount option for the mount point
`/var/lib/ceph` in the systemd template for mon and mgr containers. This
is needed in case of collocating mon/mgr with osds using dmcrypt
scenario.
Once mon/mgr got converted to containers, the dmcrypt layer sub mount is
still seen in `/var/lib/ceph`. For some reason it makes the
corresponding devices busy so any other container can't open/close it.
As a result, it prevents osds from starting properly.
Since it only happens on the nodes converted before the OSD play, the idea is
to bind mount `/var/lib/ceph` on mon and mgr with the `rshared` option
so once the sub mount is unmounted, it is propagated inside the
container so it doesn't see that mount point.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896392
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized deployment, the mon container sometimes needs to
access to the radosgw endpoint (via the radosgw-admin command). When
using TLS on the radosgw with self-signed certificates then we need to
access to the CA certification from the mon container.
The CA certificate needs to be added on the host and then the directory
will be bind mount on the container.
Resolves: #4358
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
instead of using `RuntimeDirectory` parameter in systemd unit files,
let's use a systemd `tmpfiles.d` to ensure `/run/ceph`.
Explanation:
`podman` doesn't create the `/var/run/ceph` if it doesn't exist the time
where the container is run while `docker` used to create it.
In case of `switch_to_containers` scenario, `/run/ceph` gets created by
a tmpfiles.d systemd file; when switching to containers, the systemd
unit file complains because `/run/ceph` already exists
The better fix would be to ensure `/usr/lib/tmpfiles.d/ceph-common.conf`
is removed and only rely on `RuntimeDirectory` from systemd unit file parameter
but we come from a non-containerized environment which is already running,
it means `/run/ceph` is already created and when starting the unit to
start the container, systemd will still complain and we can't simply
remove the directory if daemons are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
/var/run/ceph resides in a non persistent filesystem (tmpfs)
After a reboot, all daemons won't start because this directory will be
missing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
You can now use 'ceph_mon_container_listen_port' to change the port the
monitor will listen on.
Setting the default to 3300 (assigned by IANA) since Nautilus has released the messenger2
transport protocol.
Signed-off-by: Sébastien Han <seb@redhat.com>
using consecutive set_fact in the playbook instead of complex jinja syntax
makes ceph.conf.j2 more readable.
By the way, jinja can be painful to debug at some point.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fixes the deprecation warning:
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|search` use `result is search`.
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
This command line is not supported.
According to official documentation:
```
Note that shell command lines are not directly supported.
If shell command lines are to be used,
they need to be passed explicitly to a shell implementation of some kind.
```
We must run this using /bin/sh instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized deployment, if a mon is stopped, the socket is not
purged and can cause failure when a cluster is redeployed after the
purge playbook has been run.
Typical error:
```
fatal: [osd0]: FAILED! => {}
MSG:
'dict object' has no attribute 'osd_pool_default_pg_num'
```
the fact is not set because of this previous failure earlier:
```
ok: [mon0] => {
"changed": false,
"cmd": "docker exec ceph-mon-mon0 ceph --cluster test daemon mon.mon0 config get osd_pool_default_pg_num",
"delta": "0:00:00.217382",
"end": "2018-07-09 22:25:53.155969",
"failed_when_result": false,
"rc": 22,
"start": "2018-07-09 22:25:52.938587"
}
STDERR:
admin_socket: exception getting command descriptions: [Errno 111] Connection refused
MSG:
non-zero return code
```
This failure happens when the ceph-mon service is stopped, indeed, since
the socket isn't purged, it's a leftover which is confusing the process.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
--net=host was hardcoded in the startup line so even though
mon_docker_net_host was set to False the net option would always be
activated.
mon_docker_net_host is set to True by default so this commit does not
change the behaviour.
Signed-off-by: Sébastien Han <seb@redhat.com>
Useful for softwares that do data collection/monitoring like collectd.
They can connect to the socket and then retrieve information.
Even though the sockets are exposed now, I'm keeping the docker exec to
check the socket, this will allow newer version of ceph-ansible to work
with older versions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1563280
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
With two public networks configured - we found that with
"NETWORK_ADDR_1, NETWORK_ADDR_2" install process consistently became
broken, trying to find docker registry on second network, and not
finding mon container.
but without spaces
"NETWORK_ADDR_1,NETWORK_ADDR_2" install succeeds
so, containerized install is more peculiar with formatting of this line
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1534003
Signed-off-by: Sébastien Han <seb@redhat.com>
The name docker_version is very generic and is also used by other
roles. As a result, there may be name conflicts. To avoid this a
ceph_ prefix should be used for this fact. Since it is an internal
fact renaming is not a problem.
If a deployer uses an interface name with a dash/hyphen in it, such
as 'br-storage' for the monitor_interface group_var, the ceph.conf.j2
template fails to find the right facts. It looks for
'ansible_br-storage' but only 'ansible_br_storage' exists.
This patch converts the interface name to underscores when the
template does the fact lookup.
The path to the fact is not correct.
In any case, we will retrieve the IP address in hostvars, the variable
is the way we get the interface name according where it has been set
(eg.: inventory host file vs. group_vars/)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Setting monitor_interface in group_vars/all.yml makes the
hostvars[host]['monitor_interface'] non-existing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1507922
Signed-off-by: Sébastien Han <seb@redhat.com>
stable-3.0 brought numerous changes in ceph-ansible variables, this PR
aims to maintain backward compatibility for someone running stable-2.2
upgrading to stable-3.0 but keeps its groups_vars untouched.
We will then determine the right options to make sure the upgrade works
but we are expecting that new variables should be used.
We will drop this in a near future, maybe 3.1 or 3.2.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will solve the following issue when starting docker containers on ubuntu:
invalid argument "1\u00a0" for --cpus=1 : failed to parse 1 as a rational number
Closes-bug: #2056
need to use `hostvars[host]['XXX']` to retrieve the monitor
interface and/or radosgw interface.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1493920
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Less configuration for the user, the container inherit from the global
variables. No more container specific variables.
Signed-off-by: Sébastien Han <seb@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
e8187f6 does not fix the ipv6 as expected since `ansible_default_*` are
filled with the IP address carried by the network interface used by the
default gateway route. By the way, it assumes that the MON_IP address will
be this IP address which is not always the case.
We need to keep using the previous fact but add some intelligence in the
template to determine how to retrieve the ipv4|ipv6 address since the path
to the fact in `hostvars` is not the same according to ipv4 vs ipv6 case.
Fix: 1569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The fact ['ansible_$interface']['ipv4'] is a dictionary where
['ansible_$interface']['ipv6'] is a list. If we use
ansible_default_ipv6|ipv4 is is always a dictionary which allows us to
get the ipv6 and ipv4 address without adding more complexity to the
template.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Problem: fail to deploy a containerized Ceph cluster with ipv6
Solution: do not hardcode ipv4 when bootstrapping the container.
Now use ip_version: ipv6 to get a containerized cluster deployed with
ipv6.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1451786
Signed-off-by: Sébastien Han <seb@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
On ubntu systems mkdir is in /bin where on atomic it is /usr/bin/.
We use the shell built-in function "command" to find its right location.
Signed-off-by: Sébastien Han <seb@redhat.com>
Alex Schultz
Dimitri Savineau
Guillaume Abrioux
Sébastien Han
Noah Watkins
Christian Berendt
Major Hayden
Andrew Schoen
Tobias Florek