Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
`ceph_release` is set in `ceph-container-common` but this role is
played only on first node for clients, this means ceph-config will fail
on all client nodes except the first one.
This commit ensure ceph_release is set for all client nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling msgr2 style declaration for Nautilus and above. Prior releases
will keep the right syntax.
When upgrading from Mimic to Nautilus we must maintain something in the
form of:
mon_host = [v1:127.0.0.1:6789/0,v2:127.0.0.1:3300/0]
Signed-off-by: Sébastien Han <seb@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This part of the code is not needed since ceph-ansible@master is
intended to deploy ceph@master only.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to create the directories on non-containers, they are
created by the packages.
Closes: https://github.com/ceph/ceph-ansible/issues/3430
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph.conf doesn't accept float value.
Typical error seen:
```
$ sudo ceph daemon osd.2 config get osd_memory_target
Can't get admin socket path: unable to get conf option admin_socket for osd.2:
parse error setting 'osd_memory_target' to '7823740108,8' (strict_si_cast:
unit prefix not recognized)
```
This commit ensures the value inserted in ceph.conf will be an integer.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
Update the meta with the relavant support such as:
* ansible version: min 2.4
* distro supported (tested on) centos 7
Signed-off-by: Sébastien Han <seb@redhat.com>
using consecutive set_fact in the playbook instead of complex jinja syntax
makes ceph.conf.j2 more readable.
By the way, jinja can be painful to debug at some point.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`monitor_address_block` should be read from hostvars[host] instead of
current node being played.
eg:
Let's assume we have:
```
[mons]
ceph-mon0 monitor_address=192.168.1.10
ceph-mon1 monitor_interface=eth1
ceph-mon2 monitor_address_block=192.168.1.0/24
```
the ceph.conf generation task will end up with:
```
fatal: [ceph-mon0]: FAILED! => {}
MSG:
'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_interface'
```
the reason is that it will assume `monitor_address_block` isn't defined even on
ceph-mon2 because looking for `monitor_address_block` instead of
`hostvars[host]['monitor_address_block']`, therefore it enters in the condition as default value:
```
{%- else -%}
{% set interface = 'ansible_' + (monitor_interface | replace('-', '_')) %}
{% if ip_version == 'ipv4' -%}
{{ hostvars[host][interface][ip_version]['address'] }}
{%- elif ip_version == 'ipv6' -%}
[{{ hostvars[host][interface][ip_version][0]['address'] }}]
{%- endif %}
{%- endif %}
```
`monitor_interface` is set with default value `'interface'` so the `interface`
variable is built with 'ansible_' + 'interface'. It makes ansible throwing a
confusing message about `'ansible_interface'`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1635303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The role contains all the handlers for Ceph services. We decided to
leave ceph-defaults role with variables and a few facts only. This is
useful when organizing the site.yml files and also adding the known
variables to infrastructure-playbooks.
Signed-off-by: Sébastien Han <seb@redhat.com>
For now our best guess is to count the number of devices and multiply
by osds_per_device. Ideally we'd like to run ceph-volume lvm batch
--report and get the number of OSDs that way, but currently we need
a ceph.conf in place already before we can do that. There is a tracker
ticket that would allow os to get around the need for a ceph.conf:
http://tracker.ceph.com/issues/36088
Fixes: https://github.com/ceph/ceph-ansible/issues/3135
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the default value for _rgw_hostname was took from the current node being
played while it should be took from the respective node in the loop.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This avoids errors when the osd scenario choosen does not require
setting devices or lvm_volumes. The default values for these are not
set because they exist in the ceph-osd role, not ceph-defaults.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
let's add ansible_hostname as a default value for rgw_hostname if no
hostname in servicemap matches ansible_fqdn.
Fixes: #3063
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the ceph.conf.j2 always assumes the hostname used to register the
radosgw in the servicemap is equivalent to `{{ ansible_hostname }}`
which returns the shortname form.
We need to detect which form of the hostname was used in case of already
deployed cluster and update the ceph.conf accordingly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1580408
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is no need to have all these conditions.
for instance, assuming `mds_group_name` is set to 'mdss':
- `if groups[mds_group_name] is defined` checks if `'mdss'` is present in `{{ groups }}`
- `if {{ mds_group_name }} in group_names` checks if the current node is part
the group `'mdss'`
- `if inventory_hostname in groups.get(mds_group_name, [])` checks if
the current node is part of the group 'mdss'
The third condition is enough to cover the need of ensuring we are
running on a mds node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
This was introduced by
59ee2e8d3b
and made our socket checks impossible to run. The PID could be found,
but the cctid cannot.
This happens during upgrade to mimic and on cluster running on mimic.
So let's force the admin socket the way it was so we can properly check
for existing instances also the line $cluster-$name.$pid.$cctid.asok
is only needed when running multiple instances of the same daemon,
thing ceph-ansible cannot do at the time of writing
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610220
Signed-off-by: Sébastien Han <seb@redhat.com>
The container image recently merged both cluster and mon log into a
single stream. Following this, we now see this warning coming from the
container image:
2018-06-19 13:44:01.542990 7ff75b024700 1 mon.vm02@1(peon).log
v57928205 unable to write to '/var/log/ceph/ceph.log' for channel
'cluster': (2) No such file or directory
So we now tell the mon to not log cluster log on the filesystem.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591771
Signed-off-by: Sébastien Han <seb@redhat.com>
Since the approach to creating a ceph.conf file has changed, and now
no-longer relies on assembling config file fragments in /etc/ceph/ceph.d
we can avoid the conf_overrides rendering on the local host and skip out
the tasks related to that, instead using just the config_template task
to configure the file directly.
This was causing a lot of pain with the handlers. Also the
implementation was not ideal since we were assembling files. Everything
can now be done with the ceph_crush module so let's remove that.
Signed-off-by: Sébastien Han <seb@redhat.com>
Dimitri Savineau
Rishabh Dave
Guillaume Abrioux
John Fulton
Andrew Schoen
Zack Cerza
Sébastien Han
guihecheng
Neha Ojha
Giulio Fidente
Ha Phan
Andy McCrae