--- # Variables here are applicable to all host groups NOT roles # This sample file generated by generate_group_vars_sample.sh # Dummy variable to avoid error because ansible does not recognize the # file as a good configuration file when no variable in it. dummy: # You can override default vars defined in defaults/main.yml here, # but I would advice to use host or group vars instead ########### # GENERAL # ########### # Even though OSD nodes should not have the admin key # at their disposal, some people might want to have it # distributed on OSD nodes. Setting 'copy_admin_key' to 'true' # will copy the admin key to the /etc/ceph/ directory #copy_admin_key: false #################### # OSD CRUSH LOCATION #################### # /!\ # # BE EXTREMELY CAREFUL WITH THIS OPTION # DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING # # /!\ # # It is probably best to keep this option to 'false' as the default # suggests it. This option should only be used while doing some complex # CRUSH map. It allows you to force a specific location for a set of OSDs. # # The following options will build a ceph.conf with OSD sections # Example: # [osd.X] # osd crush location = "root=location" # # This works with your inventory file # To match the following 'osd_crush_location' option the inventory must look like: # # [osds] # osd0 ceph_crush_root=foo ceph_crush_rack=bar #crush_location: false #osd_crush_location: "\"root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}\"" ############## # CEPH OPTIONS ############## # Devices to be used as OSDs # You can pre-provision disks that are not present yet. # Ansible will just skip them. Newly added disk will be # automatically configured during the next run. # # Declare devices to be used as OSDs # All scenario(except 3rd) inherit from the following device declaration #devices: # - /dev/sdb # - /dev/sdc # - /dev/sdd # - /dev/sde #devices: [] #'osd_auto_discovery' mode prevents you from filling out the 'devices' variable above. # You can use this option with First and Forth and Fifth OSDS scenario. # Device discovery is based on the Ansible fact 'ansible_devices' # which reports all the devices on a system. If chosen all the disks # found will be passed to ceph-disk. You should not be worried on using # this option since ceph-disk has a built-in check which looks for empty devices. # Thus devices with existing partition tables will not be used. # #osd_auto_discovery: false # Encrypt your OSD device using dmcrypt # If set to True, no matter which osd_objecstore and osd_scenario you use the data will be encrypted #dmcrypt: false # I. First scenario: collocated # # To enable this scenario do: osd_scenario: collocated # # # If osd_objectstore: filestore is enabled both 'ceph data' and 'ceph journal' partitions # will be stored on the same device. # # If osd_objectstore: bluestore is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored # on the same device. The device will get 2 partitions: # - One for 'data', called 'ceph data' # - One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block' # # Example of what you will get: # [root@ceph-osd0 ~]# blkid /dev/sda* # /dev/sda: PTTYPE="gpt" # /dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7" # /dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d" # #osd_scenario: dummy #valid_osd_scenarios: # - collocated # - non-collocated # - lvm # II. Second scenario: non-collocated # # To enable this scenario do: osd_scenario: non-collocated # # If osd_objectstore: filestore is enabled 'ceph data' and 'ceph journal' partitions # will be stored on different devices: # - 'ceph data' will be stored on the device listed in 'devices' # - 'ceph journal' will be stored on the device listed in 'dedicated_devices' # # Let's take an example, imagine 'devices' was declared like this: # # devices: # - /dev/sda # - /dev/sdb # - /dev/sdc # - /dev/sdd # # And 'dedicated_devices' was declared like this: # # dedicated_devices: # - /dev/sdf # - /dev/sdf # - /dev/sdg # - /dev/sdg # # This will result in the following mapping: # - /dev/sda will have /dev/sdf1 as journal # - /dev/sdb will have /dev/sdf2 as a journal # - /dev/sdc will have /dev/sdg1 as a journal # - /dev/sdd will have /dev/sdg2 as a journal # # # NOTE(leseb): # On a containerized scenario we only support A SINGLE journal # for all the OSDs on a given machine. If you don't, bad things will happen # This is a limitation we plan to fix at some point. # # # If osd_objectstore: bluestore is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored # on a dedicated device. # # So the following will happen: # - The devices listed in 'devices' will get 2 partitions, one for 'block' and one for 'data'. # 'data' is only 100MB big and do not store any of your data, it's just a bunch of Ceph metadata. # 'block' will store all your actual data. # - The devices in 'dedicated_devices' will get 1 partition for RocksDB DB, called 'block.db' # and one for RocksDB WAL, called 'block.wal' # # By default dedicated_devices will represent block.db # # Example of what you will get: # [root@ceph-osd0 ~]# blkid /dev/sd* # /dev/sda: PTTYPE="gpt" # /dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0" # /dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c" # /dev/sdb: PTTYPE="gpt" # /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217" # /dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a" #dedicated_devices: [] # More device granularity for Bluestore # # ONLY if osd_objectstore: bluestore is enabled. # # By default, if 'bluestore_wal_devices' is empty, it will get the content of 'dedicated_devices'. # If set, then you will have a dedicated partition on a specific device for block.wal. # # Example of what you will get: # [root@ceph-osd0 ~]# blkid /dev/sd* # /dev/sda: PTTYPE="gpt" # /dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669" # /dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699" # /dev/sdb: PTTYPE="gpt" # /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3" # /dev/sdc: PTTYPE="gpt" # /dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3" #bluestore_wal_devices: "{{ dedicated_devices }}" # III. Use ceph-volume to create OSDs from logical volumes. # Use 'osd_scenario: lvm' to enable this scenario. Currently we only support dedicated journals # when using lvm, not collocated journals. # lvm_volumes is a dictionary whose key/value pair represent a data lv and a journal pair. # Journals can be either a lv, device or partition. You can not use the same journal for many data lvs. # For example: # lvm_volumes: # data-lv1: journal-lv1 # data-lv2: /dev/sda # data:lv3: /dev/sdb1 #lvm_volumes: {} ########## # DOCKER # ########## #ceph_config_keys: [] # DON'T TOUCH ME # PREPARE DEVICE # Make sure you only pass a single device to dedicated_devices, otherwise this will fail horribly. # This is why we use [0] in the example. # # WARNING /!\ DMCRYPT scenario ONLY works with Docker version 1.12.5 and above # # Examples: # Journal collocated on Filestore: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 -e OSD_FILESTORE=1 # Dedicated journal on Filestore: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 -e OSD_JOURNAL={{ dedicated_devices[0] }} -e OSD_FILESTORE=1 # Encrypted OSD on Filestore: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 -e OSD_DMCRYPT=1 -e OSD_FILESTORE=1 # Encrypted OSD with dedicated journal on Filestore: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 -e OSD_DMCRYPT=1 -e OSD_JOURNAL={{ dedicated_devices[0] }} -e OSD_FILESTORE=1 # # Bluestore OSD collocated: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_BLUESTORE=1 # Bluestore OSD with dedicated db: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_BLUESTORE=1 -e OSD_JOURNAL={{ dedicated_devices[0] }} # Bluestore OSD with dedicated db and wal: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_BLUESTORE=1 -e OSD_JOURNAL={{ dedicated_devices[0] }} -e OSD_BLUESTORE_BLOCK_WAL={{ bluestore_wal_devices[0] }} # Encrypted OSD: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 -e OSD_DMCRYPT=1 -e OSD_FILESTORE=1 # Encrypted OSD with dedicated journal: ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 -e OSD_DMCRYPT=1 -e OSD_JOURNAL={{ dedicated_devices[0] }} -e OSD_FILESTORE=1 # # #ceph_osd_docker_devices: "{{ devices }}" #ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1 # ACTIVATE DEVICE # Examples: # Journal collocated or Dedicated journal on Filesore: ceph_osd_docker_extra_env: -e CLUSTER={{ cluster }} -e CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FILESTORE=1 # Encrypted OSD or Encrypted OSD with dedicated journal: ceph_osd_docker_extra_env: -e CLUSTER={{ cluster }} -e CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_DMCRYPT=1 -e OSD_FILESTORE=1 # Bluestore OSD: ceph_osd_docker_extra_env: -e CLUSTER={{ cluster }} -e CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE -e OSD_BLUESTORE=1 # #ceph_osd_docker_extra_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} #ceph_osd_docker_run_script_path: "/usr/share" # script called by systemd to run the docker command