.. ceph-ansible documentation master file, created by sphinx-quickstart on Wed Apr 5 11:55:38 2017. You can adapt this file completely to your liking, but it should at least contain the root `toctree` directive. ceph-ansible ============ Ansible playbooks for Ceph, the distributed filesystem. Installation ============ GitHub ------ You can install directly from the source on GitHub by following these steps: - Clone the repository:: git clone https://github.com/ceph/ceph-ansible.git - Next, you must decide which branch of ``ceph-ansible`` you wish to use. There are stable branches to choose from or you could use the master branch:: git checkout $branch - Next, use pip and the provided requirements.txt to install ansible and other needed python libraries:: pip install -r requirements.txt .. _ansible-on-rhel-family: Ansible on RHEL and CentOS -------------------------- You can acquire Ansible on RHEL and CentOS by installing from `Ansible channel `_. On RHEL:: subscription-manager repos --enable=rhel-7-server-ansible-2-rpms (CentOS does not use subscription-manager and already has "Extras" enabled by default.) :: sudo yum install ansible Ansible on Ubuntu ----------------- You can acquire Ansible on Ubuntu by using the `Ansible PPA `_. :: sudo add-apt-repository ppa:ansible/ansible sudo apt update sudo apt install ansible Releases ======== The following branches should be used depending on your requirements. The ``stable-*`` branches have been QE tested and sometimes recieve backport fixes throughout their lifecycle. The ``master`` branch should be considered experimental and used with caution. - ``stable-3.0`` Support for ceph versions ``jewel`` and ``luminous``. This branch supports ansible versions ``2.4`` and ``2.5``. - ``stable-3.1`` Support for ceph version ``luminous`` and ``mimic``. This branch supports ansible versions ``2.4`` and ``2.5`` - ``master`` Support for ceph versions ``luminous``, and ``mimic``. This branch supports ansible version 2.5``. Configuration and Usage ======================= This project assumes you have a basic knowledge of how ansible works and have already prepared your hosts for configuration by ansible. After you've cloned the ``ceph-ansible`` repository, selected your branch and installed ansible then you'll need to create your inventory file, playbook and configuration for your ceph cluster. Inventory --------- The ansible inventory file defines the hosts in your cluster and what roles each host plays in your ceph cluster. The default location for an inventory file is ``/etc/ansible/hosts`` but this file can be placed anywhere and used with the ``-i`` flag of ansible-playbook. An example inventory file would look like:: [mons] mon1 mon2 mon3 [osds] osd1 osd2 osd3 .. note:: For more information on ansible inventories please refer to the ansible documentation: http://docs.ansible.com/ansible/latest/intro_inventory.html Playbook -------- You must have a playbook to pass to the ``ansible-playbook`` command when deploying your cluster. There is a sample playbook at the root of the ``ceph-ansible`` project called ``site.yml.sample``. This playbook should work fine for most usages, but it does include by default every daemon group which might not be appropriate for your cluster setup. Perform the following steps to prepare your playbook: - Rename the sample playbook: ``mv site.yml.sample site.yml`` - Modify the playbook as necessary for the requirements of your cluster .. note:: It's important the playbook you use is placed at the root of the ``ceph-ansible`` project. This is how ansible will be able to find the roles that ``ceph-ansible`` provides. Configuration Validation ------------------------ The ``ceph-ansible`` project provides config validation through the ``ceph-validate`` role. If you are using one of the provided playbooks this role will be run early in the deployment as to ensure you've given ``ceph-ansible`` the correct config. This check is only making sure that you've provided the proper config settings for your cluster, not that the values in them will produce a healthy cluster. For example, if you give an incorrect address for ``monitor_address`` then the mon will still fail to join the cluster. An example of a validation failure might look like:: TASK [ceph-validate : validate provided configuration] ************************* task path: /Users/andrewschoen/dev/ceph-ansible/roles/ceph-validate/tasks/main.yml:3 Wednesday 02 May 2018 13:48:16 -0500 (0:00:06.984) 0:00:18.803 ********* [ERROR]: [mon0] Validation failed for variable: osd_objectstore [ERROR]: [mon0] Given value for osd_objectstore: foo [ERROR]: [mon0] Reason: osd_objectstore must be either 'bluestore' or 'filestore' fatal: [mon0]: FAILED! => { "changed": false } ceph-ansible - choose installation method ----------------------------------------- Ceph can be installed through several methods. .. toctree:: :maxdepth: 1 installation/methods ceph-ansible Configuration -------------------------- The configuration for your ceph cluster will be set by the use of ansible variables that ``ceph-ansible`` provides. All of these options and their default values are defined in the ``group_vars/`` directory at the root of the ``ceph-ansible`` project. Ansible will use configuration in a ``group_vars/`` directory that is relative to your inventory file or your playbook. Inside of the ``group_vars/`` directory there are many sample ansible configuration files that relate to each of the ceph daemon groups by their filename. For example, the ``osds.yml.sample`` contains all the default configuation for the OSD daemons. The ``all.yml.sample`` file is a special ``group_vars`` file that applies to all hosts in your cluster. .. note:: For more information on setting group or host specific configuration refer to the ansible documentation: http://docs.ansible.com/ansible/latest/intro_inventory.html#splitting-out-host-and-group-specific-data At the most basic level you must tell ``ceph-ansible`` what version of ceph you wish to install, the method of installation, your clusters network settings and how you want your OSDs configured. To begin your configuration rename each file in ``group_vars/`` you wish to use so that it does not include the ``.sample`` at the end of the filename, uncomment the options you wish to change and provide your own value. An example configuration that deploys the upstream ``jewel`` version of ceph with OSDs that have collocated journals would look like this in ``group_vars/all.yml``:: ceph_origin: repository ceph_repository: community ceph_stable_release: jewel public_network: "192.168.3.0/24" cluster_network: "192.168.4.0/24" monitor_interface: eth1 devices: - '/dev/sda' - '/dev/sdb' osd_scenario: collocated The following config options are required to be changed on all installations but there could be other required options depending on your OSD scenario selection or other aspects of your cluster. - ``ceph_origin`` - ``ceph_stable_release`` - ``public_network`` - ``osd_scenario`` - ``monitor_interface`` or ``monitor_address`` - ``radosgw_interface`` or ``radosgw_address`` ceph.conf Configuration ----------------------- The supported method for defining your ceph.conf is to use the ``ceph_conf_overrides`` variable. This allows you to specify configuration options using an INI format. This variable can be used to override sections already defined in ceph.conf (see: ``roles/ceph-config/templates/ceph.conf.j2``) or to provide new configuration options. The following sections in ceph.conf are supported: [global], [mon], [osd], [mds] and [rgw]. An example:: ceph_conf_overrides: global: foo: 1234 bar: 5678 osd: osd_mkfs_type: ext4 .. note:: We will no longer accept pull requests that modify the ceph.conf template unless it helps the deployment. For simple configuration tweaks please use the ``ceph_conf_overrides`` variable. Full documentation for configuring each of the ceph daemon types are in the following sections. OSD Configuration ----------------- OSD configuration is set by selecting an osd scenario and providing the configuration needed for that scenario. Each scenario is different in it's requirements. Selecting your OSD scenario is done by setting the ``osd_scenario`` configuration option. .. toctree:: :maxdepth: 1 osds/scenarios Contribution ============ See the following section for guidelines on how to contribute to ``ceph-ansible``. .. toctree:: :maxdepth: 1 dev/index Testing ======= Documentation for writing functional testing scenarios for ceph-ansible. * :doc:`Testing with ceph-ansible ` * :doc:`Glossary ` Demos ===== Vagrant Demo ------------ Deployment from scratch on bare metal machines: https://youtu.be/E8-96NamLDo Bare metal demo --------------- Deployment from scratch on bare metal machines: https://youtu.be/dv_PEp9qAqg