ceph-ansible/group_vars/rhcs.yml.sample

824 lines
29 KiB
Plaintext

---
# Variables here are applicable to all host groups NOT roles
# This sample file generated by generate_group_vars_sample.sh
# Dummy variable to avoid error because ansible does not recognize the
# file as a good configuration file when no variable in it.
dummy:
# You can override vars by using host or group vars
###########
# GENERAL #
###########
######################################
# Releases name to number dictionary #
######################################
#ceph_release_num:
# dumpling: 0.67
# emperor: 0.72
# firefly: 0.80
# giant: 0.87
# hammer: 0.94
# infernalis: 9
# jewel: 10
# kraken: 11
# luminous: 12
# mimic: 13
# nautilus: 14
# dev: 99
# Directory to fetch cluster fsid, keys etc...
fetch_directory: ~/ceph-ansible-keys
# The 'cluster' variable determines the name of the cluster.
# Changing the default value to something else means that you will
# need to change all the command line calls as well, for example if
# your cluster name is 'foo':
# "ceph health" will become "ceph --cluster foo health"
#
# An easier way to handle this is to use the environment variable CEPH_ARGS
# So run: "export CEPH_ARGS="--cluster foo"
# With that you will be able to run "ceph health" normally
#cluster: ceph
# Inventory host group variables
#mon_group_name: mons
#osd_group_name: osds
#rgw_group_name: rgws
#mds_group_name: mdss
#nfs_group_name: nfss
#rbdmirror_group_name: rbdmirrors
#client_group_name: clients
#iscsi_gw_group_name: iscsigws
#mgr_group_name: mgrs
#rgwloadbalancer_group_name: rgwloadbalancers
#grafana_server_group_name: grafana-server
# If configure_firewall is true, then ansible will try to configure the
# appropriate firewalling rules so that Ceph daemons can communicate
# with each others.
#configure_firewall: True
# Open ports on corresponding nodes if firewall is installed on it
#ceph_mon_firewall_zone: public
#ceph_mgr_firewall_zone: public
#ceph_osd_firewall_zone: public
#ceph_rgw_firewall_zone: public
#ceph_mds_firewall_zone: public
#ceph_nfs_firewall_zone: public
#ceph_rbdmirror_firewall_zone: public
#ceph_iscsi_firewall_zone: public
#ceph_dashboard_firewall_zone: public
#ceph_rgwloadbalancer_firewall_zone: public
# Generate local ceph.conf in fetch directory
#ceph_conf_local: false
############
# PACKAGES #
############
#debian_package_dependencies: []
#centos_package_dependencies:
# - epel-release
# - libselinux-python
#redhat_package_dependencies: []
#suse_package_dependencies:
# - python-xml
# Whether or not to install the ceph-test package.
#ceph_test: false
# Enable the ntp service by default to avoid clock skew on ceph nodes
# Disable if an appropriate NTP client is already installed and configured
#ntp_service_enabled: true
# Set type of NTP client daemon to use, valid entries are chronyd, ntpd or timesyncd
# Note that this selection is currently ignored on containerized deployments
#ntp_daemon_type: chronyd
# Set uid/gid to default '64045' for bootstrap directories.
# '64045' is used for debian based distros. It must be set to 167 in case of rhel based distros.
# These values have to be set according to the base OS used by the container image, NOT the host.
#bootstrap_dirs_owner: "64045"
#bootstrap_dirs_group: "64045"
# This variable determines if ceph packages can be updated. If False, the
# package resources will use "state=present". If True, they will use
# "state=latest".
#upgrade_ceph_packages: False
#ceph_use_distro_backports: false # DEBIAN ONLY
###########
# INSTALL #
###########
#ceph_repository_type: dummy
# ORIGIN SOURCE
#
# Choose between:
# - 'repository' means that you will get ceph installed through a new repository. Later below choose between 'community', 'rhcs', 'dev' or 'obs'
# - 'distro' means that no separate repo file will be added
# you will get whatever version of Ceph is included in your Linux distro.
# 'local' means that the ceph binaries will be copied over from the local machine
ceph_origin: repository
#valid_ceph_origins:
# - repository
# - distro
# - local
ceph_repository: rhcs
#valid_ceph_repository:
# - community
# - rhcs
# - dev
# - uca
# - custom
# - obs
# REPOSITORY: COMMUNITY VERSION
#
# Enabled when ceph_repository == 'community'
#
#ceph_mirror: http://download.ceph.com
#ceph_stable_key: https://download.ceph.com/keys/release.asc
#ceph_stable_release: dummy
#ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}"
#nfs_ganesha_stable: true # use stable repos for nfs-ganesha
#nfs_ganesha_stable_branch: V2.7-stable
#nfs_ganesha_stable_deb_repo: "{{ ceph_mirror }}/nfs-ganesha/deb-{{ nfs_ganesha_stable_branch }}/{{ ceph_stable_release }}"
# Use the option below to specify your applicable package tree, eg. when using non-LTS Ubuntu versions
# # for a list of available Debian distributions, visit http://download.ceph.com/debian-{{ ceph_stable_release }}/dists/
# for more info read: https://github.com/ceph/ceph-ansible/issues/305
#ceph_stable_distro_source: "{{ ansible_distribution_release }}"
# This option is needed for _both_ stable and dev version, so please always fill the right version
# # for supported distros, see http://download.ceph.com/rpm-{{ ceph_stable_release }}/
#ceph_stable_redhat_distro: el7
# REPOSITORY: RHCS VERSION RED HAT STORAGE (from 4.0)
#
# Enabled when ceph_repository == 'rhcs'
#
# This version is only supported on RHEL >= 8.0
#
ceph_rhcs_version: 4
#valid_ceph_repository_type:
# - cdn
# - iso
#ceph_rhcs_iso_path: "{{ ceph_stable_rh_storage_iso_path | default('') }}"
#ceph_rhcs_mount_path: "{{ ceph_stable_rh_storage_mount_path | default('/tmp/rh-storage-mount') }}"
#ceph_rhcs_repository_path: "{{ ceph_stable_rh_storage_repository_path | default('/tmp/rh-storage-repo') }}" # where to copy iso's content
# RHCS installation in Debian systems
#ceph_rhcs_cdn_debian_repo: https://customername:customerpasswd@rhcs.download.redhat.com
#ceph_rhcs_cdn_debian_repo_version: "/3-release/" # for GA, later for updates use /3-updates/
# REPOSITORY: UBUNTU CLOUD ARCHIVE
#
# Enabled when ceph_repository == 'uca'
#
# This allows the install of Ceph from the Ubuntu Cloud Archive. The Ubuntu Cloud Archive
# usually has newer Ceph releases than the normal distro repository.
#
#
#ceph_stable_repo_uca: "http://ubuntu-cloud.archive.canonical.com/ubuntu"
#ceph_stable_openstack_release_uca: queens
#ceph_stable_release_uca: "{{ ansible_distribution_release }}-updates/{{ ceph_stable_openstack_release_uca }}"
# REPOSITORY: openSUSE OBS
#
# Enabled when ceph_repository == 'obs'
#
# This allows the install of Ceph from the openSUSE OBS repository. The OBS repository
# usually has newer Ceph releases than the normal distro repository.
#
#
#ceph_obs_repo: "https://download.opensuse.org/repositories/filesystems:/ceph:/luminous/openSUSE_Leap_{{ ansible_distribution_version }}/"
# REPOSITORY: DEV
#
# Enabled when ceph_repository == 'dev'
#
#ceph_dev_branch: master # development branch you would like to use e.g: master, wip-hack
#ceph_dev_sha1: latest # distinct sha1 to use, defaults to 'latest' (as in latest built)
#nfs_ganesha_dev: false # use development repos for nfs-ganesha
# Set this to choose the version of ceph dev libraries used in the nfs-ganesha packages from shaman
# flavors so far include: ceph_master, ceph_jewel, ceph_kraken, ceph_luminous
#nfs_ganesha_flavor: "ceph_master"
#ceph_iscsi_config_dev: true # special repo for deploying iSCSI gateways
# REPOSITORY: CUSTOM
#
# Enabled when ceph_repository == 'custom'
#
# Use a custom repository to install ceph. For RPM, ceph_custom_repo should be
# a URL to the .repo file to be installed on the targets. For deb,
# ceph_custom_repo should be the URL to the repo base.
#
#ceph_custom_repo: https://server.domain.com/ceph-custom-repo
# ORIGIN: LOCAL CEPH INSTALLATION
#
# Enabled when ceph_repository == 'local'
#
# Path to DESTDIR of the ceph install
#ceph_installation_dir: "/path/to/ceph_installation/"
# Whether or not to use installer script rundep_installer.sh
# This script takes in rundep and installs the packages line by line onto the machine
# If this is set to false then it is assumed that the machine ceph is being copied onto will already have
# all runtime dependencies installed
#use_installer: false
# Root directory for ceph-ansible
#ansible_dir: "/path/to/ceph-ansible"
######################
# CEPH CONFIGURATION #
######################
## Ceph options
#
# Each cluster requires a unique, consistent filesystem ID. By
# default, the playbook generates one for you and stores it in a file
# in `fetch_directory`. If you want to customize how the fsid is
# generated, you may find it useful to disable fsid generation to
# avoid cluttering up your ansible repo. If you set `generate_fsid` to
# false, you *must* generate `fsid` in another way.
# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
#fsid: "{{ cluster_uuid.stdout }}"
#generate_fsid: true
#ceph_conf_key_directory: /etc/ceph
# Permissions for keyring files in /etc/ceph
#ceph_keyring_permissions: '0600'
#cephx: true
## Client options
#
#rbd_cache: "true"
#rbd_cache_writethrough_until_flush: "true"
#rbd_concurrent_management_ops: 20
#rbd_client_directories: true # this will create rbd_client_log_path and rbd_client_admin_socket_path directories with proper permissions
# Permissions for the rbd_client_log_path and
# rbd_client_admin_socket_path. Depending on your use case for Ceph
# you may want to change these values. The default, which is used if
# any of the variables are unset or set to a false value (like `null`
# or `false`) is to automatically determine what is appropriate for
# the Ceph version with non-OpenStack workloads -- ceph:ceph and 0770
# for infernalis releases, and root:root and 1777 for pre-infernalis
# releases.
#
# For other use cases, including running Ceph with OpenStack, you'll
# want to set these differently:
#
# For OpenStack on RHEL, you'll want:
# rbd_client_directory_owner: "qemu"
# rbd_client_directory_group: "libvirtd" (or "libvirt", depending on your version of libvirt)
# rbd_client_directory_mode: "0755"
#
# For OpenStack on Ubuntu or Debian, set:
# rbd_client_directory_owner: "libvirt-qemu"
# rbd_client_directory_group: "kvm"
# rbd_client_directory_mode: "0755"
#
# If you set rbd_client_directory_mode, you must use a string (e.g.,
# 'rbd_client_directory_mode: "0755"', *not*
# 'rbd_client_directory_mode: 0755', or Ansible will complain: mode
# must be in octal or symbolic form
#rbd_client_directory_owner: null
#rbd_client_directory_group: null
#rbd_client_directory_mode: null
#rbd_client_log_path: /var/log/ceph
#rbd_client_log_file: "{{ rbd_client_log_path }}/qemu-guest-$pid.log" # must be writable by QEMU and allowed by SELinux or AppArmor
#rbd_client_admin_socket_path: /var/run/ceph # must be writable by QEMU and allowed by SELinux or AppArmor
## Monitor options
#
# You must define either monitor_interface, monitor_address or monitor_address_block.
# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).
# Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable.
# Preference will go to monitor_address if both monitor_address and monitor_interface are defined.
#monitor_interface: interface
#monitor_address: 0.0.0.0
#monitor_address_block: subnet
# set to either ipv4 or ipv6, whichever your network is using
#ip_version: ipv4
#mon_use_fqdn: false # if set to true, the MON name used will be the fqdn in the ceph.conf
#mon_host_v1:
# enabled: True
# suffix: ':6789'
#mon_host_v2:
# suffix: ':3300'
##########
# CEPHFS #
##########
#cephfs: cephfs # name of the ceph filesystem
#cephfs_data_pool:
# name: "{{ cephfs_data if cephfs_data is defined else 'cephfs_data' }}"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "cephfs"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#cephfs_metadata_pool:
# name: "{{ cephfs_metadata if cephfs_metadata is defined else 'cephfs_metadata' }}"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "cephfs"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#cephfs_pools:
# - "{{ cephfs_data_pool }}"
# - "{{ cephfs_metadata_pool }}"
## OSD options
#
#is_hci: false
#hci_safety_factor: 0.2
#non_hci_safety_factor: 0.7
#osd_memory_target: 4294967296
#journal_size: 5120 # OSD journal size in MB
#block_db_size: -1 # block db size in bytes for the ceph-volume lvm batch. -1 means use the default of 'as big as possible'.
#public_network: 0.0.0.0/0
#cluster_network: "{{ public_network | regex_replace(' ', '') }}"
#osd_mkfs_type: xfs
#osd_mkfs_options_xfs: -f -i size=2048
#osd_mount_options_xfs: noatime,largeio,inode64,swalloc
#osd_objectstore: bluestore
# Any device containing these patterns in their path will be excluded.
#osd_auto_discovery_exclude: "dm-*|loop*"
# xattrs. by default, 'filestore xattr use omap' is set to 'true' if
# 'osd_mkfs_type' is set to 'ext4'; otherwise it isn't set. This can
# be set to 'true' or 'false' to explicitly override those
# defaults. Leave it 'null' to use the default for your chosen mkfs
# type.
#filestore_xattr_use_omap: null
## MDS options
#
#mds_use_fqdn: false # if set to true, the MDS name used will be the fqdn in the ceph.conf
#mds_max_mds: 1
## Rados Gateway options
#
#radosgw_frontend_type: beast # For additionnal frontends see: http://docs.ceph.com/docs/nautilus/radosgw/frontends/
#radosgw_civetweb_port: 8080
#radosgw_civetweb_num_threads: 512
#radosgw_civetweb_options: "num_threads={{ radosgw_civetweb_num_threads }}"
# For additional civetweb configuration options available such as logging,
# keepalive, and timeout settings, please see the civetweb docs at
# https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md
#radosgw_frontend_port: "{{ radosgw_civetweb_port if radosgw_frontend_type == 'civetweb' else '8080' }}"
# The server private key, public certificate and any other CA or intermediate certificates should be in one file, in PEM format.
#radosgw_frontend_ssl_certificate: ""
#radosgw_frontend_options: "{{ radosgw_civetweb_options if radosgw_frontend_type == 'civetweb' else '' }}"
#radosgw_thread_pool_size: 512
# You must define either radosgw_interface, radosgw_address.
# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).
# Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable.
# Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined.
#radosgw_interface: interface
#radosgw_address: 0.0.0.0
#radosgw_address_block: subnet
#radosgw_keystone_ssl: false # activate this when using keystone PKI keys
#radosgw_num_instances: 1
# Rados Gateway options
#email_address: foo@bar.com
## Testing mode
# enable this mode _only_ when you have a single node
# if you don't want it keep the option commented
#common_single_host_mode: true
## Handlers - restarting daemons after a config change
# if for whatever reasons the content of your ceph configuration changes
# ceph daemons will be restarted as well. At the moment, we can not detect
# which config option changed so all the daemons will be restarted. Although
# this restart will be serialized for each node, in between a health check
# will be performed so we make sure we don't move to the next node until
# ceph is not healthy
# Obviously between the checks (for monitors to be in quorum and for osd's pgs
# to be clean) we have to wait. These retries and delays can be configurable
# for both monitors and osds.
#
# Monitor handler checks
#handler_health_mon_check_retries: 10
#handler_health_mon_check_delay: 20
#
# OSD handler checks
#handler_health_osd_check_retries: 40
#handler_health_osd_check_delay: 30
#handler_health_osd_check: true
#
# MDS handler checks
#handler_health_mds_check_retries: 5
#handler_health_mds_check_delay: 10
#
# RGW handler checks
#handler_health_rgw_check_retries: 5
#handler_health_rgw_check_delay: 10
# NFS handler checks
#handler_health_nfs_check_retries: 5
#handler_health_nfs_check_delay: 10
# RBD MIRROR handler checks
#handler_health_rbd_mirror_check_retries: 5
#handler_health_rbd_mirror_check_delay: 10
# MGR handler checks
#handler_health_mgr_check_retries: 5
#handler_health_mgr_check_delay: 10
###############
# NFS-GANESHA #
###############
# Confiure the type of NFS gatway access. At least one must be enabled for an
# NFS role to be useful
#
# Set this to true to enable File access via NFS. Requires an MDS role.
#nfs_file_gw: false
# Set this to true to enable Object access via NFS. Requires an RGW role.
#nfs_obj_gw: "{{ False if groups.get(mon_group_name, []) | length == 0 else True }}"
#############
# MULTISITE #
#############
#rgw_multisite: false
# The following Multi-site related variables should be set by the user.
#
# If there is more than 1 RGW in a master or secondary cluster than rgw_multisite_endpoints needs to be a comma seperated list (with no spaces) of the RGW endpoints in the format:
# {{ rgw_multisite_proto }}://{{ ansible_fqdn }}:{{ radosgw_frontend_port }}
# ex: rgw_multisite_endpoints: http://foo.example.com:8080,http://bar.example.com:8080,http://baz.example.com:8080
#
# If there is only 1 RGW in the inventory, rgw_multisite_endpoints does not need to change
#
# rgw_zone is set to "default" to enable compression for clusters configured without rgw multi-site
# If multisite is configured rgw_zone should not be set to "default". See README-MULTISITE.md for an example.
#rgw_zone: default
#rgw_zonemaster: true
#rgw_zonesecondary: false
#rgw_multisite_proto: "http"
#rgw_multisite_endpoint_addr: "{{ ansible_fqdn }}"
#rgw_multisite_endpoints_list: "{{ rgw_multisite_proto }}://{{ ansible_fqdn }}:{{ radosgw_frontend_port }}"
#rgw_zonegroup: solarsystem # should be set by the user
#rgw_zone_user: zone.user
#rgw_realm: milkyway # should be set by the user
#system_access_key: 6kWkikvapSnHyE22P7nO # should be re-created by the user
#system_secret_key: MGecsMrWtKZgngOHZdrd6d3JxGO5CPWgT2lcnpSt # should be re-created by the user
# Multi-site remote pull URL variables
#rgw_pull_port: "{{ radosgw_civetweb_port }}"
#rgw_pull_proto: "http" # should be the same as rgw_multisite_proto for the master zone cluster
#rgw_pullhost: localhost # rgw_pullhost only needs to be declared if there is a zone secondary. It should be the same as rgw_multisite_endpoint_addr for the master zone cluster
###################
# CONFIG OVERRIDE #
###################
# Ceph configuration file override.
# This allows you to specify more configuration options
# using an INI style format.
#
# When configuring RGWs, make sure you use the form [client.rgw.*]
# instead of [client.radosgw.*].
# For more examples check the profiles directory of https://github.com/ceph/ceph-ansible.
#
# The following sections are supported: [global], [mon], [osd], [mds], [rgw]
#
# Example:
# ceph_conf_overrides:
# global:
# foo: 1234
# bar: 5678
# "client.rgw.{{ hostvars[groups.get(rgw_group_name)[0]]['ansible_hostname'] }}":
# rgw_zone: zone1
#
#ceph_conf_overrides: {}
#############
# OS TUNING #
#############
#disable_transparent_hugepage: "{{ false if osd_objectstore == 'bluestore' else true }}"
#os_tuning_params:
# - { name: fs.file-max, value: 26234859 }
# - { name: vm.zone_reclaim_mode, value: 0 }
# - { name: vm.swappiness, value: 10 }
# - { name: vm.min_free_kbytes, value: "{{ vm_min_free_kbytes }}" }
# For Debian & Red Hat/CentOS installs set TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
# Set this to a byte value (e.g. 134217728)
# A value of 0 will leave the package default.
#ceph_tcmalloc_max_total_thread_cache: 0
##########
# DOCKER #
##########
#container_exec_cmd:
#docker: false
ceph_docker_image: "rhceph/rhceph-4-rhel8"
ceph_docker_image_tag: "latest"
ceph_docker_registry: "registry.access.redhat.com"
## Client only docker image - defaults to {{ ceph_docker_image }}
#ceph_client_docker_image: "{{ ceph_docker_image }}"
#ceph_client_docker_image_tag: "{{ ceph_docker_image_tag }}"
#ceph_client_docker_registry: "{{ ceph_docker_registry }}"
#ceph_docker_enable_centos_extra_repo: false
#ceph_docker_on_openstack: false
#containerized_deployment: False
#container_binary:
#timeout_command: "{{ 'timeout --foreground -s KILL ' ~ docker_pull_timeout if (docker_pull_timeout != '0') and (ceph_docker_dev_image is undefined or not ceph_docker_dev_image) else '' }}"
# this is only here for usage with the rolling_update.yml playbook
# do not ever change this here
#rolling_update: false
#####################
# Docker pull retry #
#####################
#docker_pull_retry: 3
#docker_pull_timeout: "300s"
#############
# OPENSTACK #
#############
#openstack_config: false
#openstack_glance_pool:
# name: "images"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_cinder_pool:
# name: "volumes"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_nova_pool:
# name: "vms"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_cinder_backup_pool:
# name: "backups"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_gnocchi_pool:
# name: "metrics"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_cephfs_data_pool:
# name: "manila_data"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_cephfs_metadata_pool:
# name: "manila_metadata"
# pg_num: "{{ osd_pool_default_pg_num }}"
# pgp_num: "{{ osd_pool_default_pg_num }}"
# rule_name: "replicated_rule"
# type: 1
# erasure_profile: ""
# expected_num_objects: ""
# application: "rbd"
# size: "{{ osd_pool_default_size }}"
# min_size: "{{ osd_pool_default_min_size }}"
#openstack_pools:
# - "{{ openstack_glance_pool }}"
# - "{{ openstack_cinder_pool }}"
# - "{{ openstack_nova_pool }}"
# - "{{ openstack_cinder_backup_pool }}"
# - "{{ openstack_gnocchi_pool }}"
# - "{{ openstack_cephfs_data_pool }}"
# - "{{ openstack_cephfs_metadata_pool }}"
# The value for 'key' can be a pre-generated key,
# e.g key: "AQDC2UxZH4yeLhAAgTaZb+4wDUlYOsr1OfZSpQ=="
# By default, keys will be auto-generated.
#
#openstack_keys:
# - { name: client.glance, caps: { mon: "profile rbd", osd: "profile rbd pool=volumes, profile rbd pool={{ openstack_glance_pool.name }}"}, mode: "0600" }
# - { name: client.cinder, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_cinder_pool.name }}, profile rbd pool={{ openstack_nova_pool.name }}, profile rbd pool={{ openstack_glance_pool.name }}"}, mode: "0600" }
# - { name: client.cinder-backup, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_cinder_backup_pool.name }}"}, mode: "0600" }
# - { name: client.gnocchi, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_gnocchi_pool.name }}"}, mode: "0600", }
# - { name: client.openstack, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_glance_pool.name }}, profile rbd pool={{ openstack_nova_pool.name }}, profile rbd pool={{ openstack_cinder_pool.name }}, profile rbd pool={{ openstack_cinder_backup_pool.name }}"}, mode: "0600" }
#############
# DASHBOARD #
#############
#dashboard_enabled: True
# Choose http or https
# For https, you should set dashboard.crt/key and grafana.crt/key
#dashboard_protocol: http
#dashboard_port: 8443
#dashboard_admin_user: admin
#dashboard_admin_password: admin
# We only need this for SSL (https) connections
#dashboard_crt: ''
#dashboard_key: ''
#dashboard_rgw_api_user_id: ceph-dashboard
#dashboard_rgw_api_host: ''
#dashboard_rgw_api_port: ''
#dashboard_rgw_api_scheme: ''
#dashboard_rgw_api_admin_resource: ''
#dashboard_rgw_api_no_ssl_verify: False
#node_exporter_container_image: prom/node-exporter:latest
#node_exporter_port: 9100
#grafana_admin_user: admin
#grafana_admin_password: admin
# We only need this for SSL (https) connections
#grafana_crt: ''
#grafana_key: ''
#grafana_container_image: "grafana/grafana:latest"
#grafana_container_cpu_period: 100000
#grafana_container_cpu_cores: 2
# container_memory is in GB
#grafana_container_memory: 4
#grafana_uid: 472
#grafana_datasource: Dashboard
#grafana_dashboards_path: "/etc/grafana/dashboards/ceph-dashboard"
#grafana_plugins:
# - vonage-status-panel
# - grafana-piechart-panel
#grafana_allow_embedding: True
#grafana_port: 3000
#prometheus_container_image: prom/prometheus:latest
#prometheus_container_cpu_period: 100000
#prometheus_container_cpu_cores: 2
# container_memory is in GB
#prometheus_container_memory: 4
#prometheus_data_dir: /var/lib/prometheus
#prometheus_conf_dir: /etc/prometheus
#prometheus_user_id: '65534' # This is the UID used by the prom/prometheus container image
#prometheus_port: 9090
#alertmanager_container_image: prom/alertmanager:latest
#alertmanager_container_cpu_period: 100000
#alertmanager_container_cpu_cores: 2
# container_memory is in GB
#alertmanager_container_memory: 4
#alertmanager_data_dir: /var/lib/alertmanager
#alertmanager_conf_dir: /etc/alertmanager
#alertmanager_port: 9093
##################################
# DEPRECIATED iSCSI TARGET SETUP #
##################################
# WARNING #
# The following values are depreciated. To setup targets, gateways, LUNs, and
# clients you should use gwcli or dashboard. If the following values are set,
# the old ceph-iscsi-config/ceph-iscsi-cli packages will be used.
# Specify the iqn for ALL gateways. This iqn is shared across the gateways, so an iscsi
# client sees the gateway group as a single storage subsystem.
#gateway_iqn: ""
# gateway_ip_list provides a list of the IP Addrresses - one per gateway - that will be used
# as an iscsi target portal ip. The list must be comma separated - and the order determines
# the sequence of TPG's within the iscsi target across each gateway. Once set, additional
# gateways can be added, but the order must *not* be changed.
#gateway_ip_list: 0.0.0.0
# rbd_devices defines the images that should be created and exported from the iscsi gateways.
# If the rbd does not exist, it will be created for you. In addition you may increase the
# size of rbd's by changing the size parameter and rerunning the playbook. A size value lower
# than the current size of the rbd is ignored.
#
# the 'host' parameter defines which of the gateway nodes should handle the physical
# allocation/expansion or removal of the rbd
# to remove an image, simply use a state of 'absent'. This will first check the rbd is not allocated
# to any client, and the remove it from LIO and then delete the rbd image
#
# NB. this variable definition can be commented out to bypass LUN management
#
# Example:
#
#rbd_devices:
# - { pool: 'rbd', image: 'ansible1', size: '30G', host: 'ceph-1', state: 'present' }
# - { pool: 'rbd', image: 'ansible2', size: '15G', host: 'ceph-1', state: 'present' }
# - { pool: 'rbd', image: 'ansible3', size: '30G', host: 'ceph-1', state: 'present' }
# - { pool: 'rbd', image: 'ansible4', size: '50G', host: 'ceph-1', state: 'present' }
#rbd_devices: {}
# client_connections defines the client ACL's to restrict client access to specific LUNs
# The settings are as follows;
# - image_list is a comma separated list of rbd images of the form <pool name>.<rbd_image_name>
# - chap supplies the user and password the client will use for authentication of the
# form <user>/<password>
# - status shows the intended state of this client definition - 'present' or 'absent'
#
# NB. this definition can be commented out to skip client (nodeACL) management
#
# Example:
#
#client_connections:
# - { client: 'iqn.1994-05.com.redhat:rh7-iscsi-client', image_list: 'rbd.ansible1,rbd.ansible2', chap: 'rh7-iscsi-client/redhat', status: 'present' }
# - { client: 'iqn.1991-05.com.microsoft:w2k12r2', image_list: 'rbd.ansible4', chap: 'w2k12r2/microsoft_w2k12', status: 'absent' }
#client_connections: {}
###############
# DEPRECATION #
###############
#use_fqdn_yes_i_am_sure: false