mirror of https://github.com/ceph/ceph-ansible.git
409 lines
13 KiB
ReStructuredText
409 lines
13 KiB
ReStructuredText
OSD Scenarios
|
|
=============
|
|
|
|
There are a few *scenarios* that are supported and the differences are mainly
|
|
based on the Ceph tooling required to provision OSDs, but can also affect how
|
|
devices are being configured to create an OSD.
|
|
|
|
Supported values for the required ``osd_scenario`` variable are:
|
|
|
|
* :ref:`collocated <osd_scenario_collocated>`
|
|
* :ref:`non-collocated <osd_scenario_non_collocated>`
|
|
* :ref:`lvm <osd_scenario_lvm>`
|
|
|
|
Since the Ceph mimic release, it is preferred to use the :ref:`lvm scenario
|
|
<osd_scenario_lvm>` that uses the ``ceph-volume`` provisioning tool. Any other
|
|
scenario will cause deprecation warnings.
|
|
|
|
|
|
.. _osd_scenario_lvm:
|
|
|
|
lvm
|
|
---
|
|
|
|
This OSD scenario uses ``ceph-volume`` to create OSDs, primarily using LVM, and
|
|
is only available when the Ceph release is luminous or newer.
|
|
|
|
**It is the preferred method of provisioning OSDs.**
|
|
|
|
It is enabled with the following setting::
|
|
|
|
|
|
osd_scenario: lvm
|
|
|
|
Other (optional) supported settings:
|
|
|
|
- ``osd_objectstore``: Set the Ceph *objectstore* for the OSD. Available options
|
|
are ``filestore`` or ``bluestore``. You can only select ``bluestore`` with
|
|
the Ceph release is luminous or greater. Defaults to ``filestore`` if unset.
|
|
|
|
- ``dmcrypt``: Enable Ceph's encryption on OSDs using ``dmcrypt``.
|
|
Defaults to ``false`` if unset.
|
|
|
|
- ``osds_per_device``: Provision more than 1 OSD (the default if unset) per device.
|
|
|
|
|
|
Simple configuration
|
|
^^^^^^^^^^^^^^^^^^^^
|
|
|
|
With this approach, most of the decisions on how devices are configured to
|
|
provision an OSD are made by the Ceph tooling (``ceph-volume lvm batch`` in
|
|
this case). There is almost no room to modify how the OSD is composed given an
|
|
input of devices.
|
|
|
|
To use this configuration, the ``devices`` option must be populated with the
|
|
raw device paths that will be used to provision the OSDs.
|
|
|
|
|
|
.. note:: Raw devices must be "clean", without a gpt partition table, or
|
|
logical volumes present.
|
|
|
|
|
|
For example, for a node that has ``/dev/sda`` and ``/dev/sdb`` intended for
|
|
Ceph usage, the configuration would be:
|
|
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_scenario: lvm
|
|
devices:
|
|
- /dev/sda
|
|
- /dev/sdb
|
|
|
|
In the above case, if both devices are spinning drives, 2 OSDs would be
|
|
created, each with its own collocated journal.
|
|
|
|
Other provisioning strategies are possible, by mixing spinning and solid state
|
|
devices, for example:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_scenario: lvm
|
|
devices:
|
|
- /dev/sda
|
|
- /dev/sdb
|
|
- /dev/nvme0n1
|
|
|
|
Similar to the initial example, this would end up producing 2 OSDs, but data
|
|
would be placed on the slower spinning drives (``/dev/sda``, and ``/dev/sdb``)
|
|
and journals would be placed on the faster solid state device ``/dev/nvme0n1``.
|
|
The ``ceph-volume`` tool describes this in detail in
|
|
`the "batch" subcommand section <http://docs.ceph.com/docs/master/ceph-volume/lvm/batch/>`_
|
|
|
|
|
|
Other (optional) supported settings:
|
|
|
|
- ``crush_device_class``: Sets the CRUSH device class for all OSDs created with this
|
|
method (it is not possible to have a per-OSD CRUSH device class using the *simple*
|
|
configuration approach). Values *must be* a string, like
|
|
``crush_device_class: "ssd"``
|
|
|
|
|
|
Advanced configuration
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
This configuration is useful when more granular control is wanted when setting
|
|
up devices and how they should be arranged to provision an OSD. It requires an
|
|
existing setup of volume groups and logical volumes (``ceph-volume`` will **not**
|
|
create these).
|
|
|
|
To use this configuration, the ``lvm_volumes`` option must be populated with
|
|
logical volumes and volume groups. Additionally, absolute paths to partitions
|
|
*can* be used for ``journal``, ``block.db``, and ``block.wal``.
|
|
|
|
.. note:: This configuration uses ``ceph-volume lvm create`` to provision OSDs
|
|
|
|
Supported ``lvm_volumes`` configuration settings:
|
|
|
|
- ``data``: The logical volume name or full path to a raw device (an LV will be
|
|
created using 100% of the raw device)
|
|
|
|
- ``data_vg``: The volume group name, **required** if ``data`` is a logical volume.
|
|
|
|
- ``crush_device_class``: CRUSH device class name for the resulting OSD, allows
|
|
setting set the device class for each OSD, unlike the global ``crush_device_class``
|
|
that sets them for all OSDs.
|
|
|
|
.. note:: If you wish to set the ``crush_device_class`` for the OSDs
|
|
when using ``devices`` you must set it using the global ``crush_device_class``
|
|
option as shown above. There is no way to define a specific CRUSH device class
|
|
per OSD when using ``devices`` like there is for ``lvm_volumes``.
|
|
|
|
|
|
``filestore`` objectstore variables:
|
|
|
|
- ``journal``: The logical volume name or full path to a partition.
|
|
|
|
- ``journal_vg``: The volume group name, **required** if ``journal`` is a logical volume.
|
|
|
|
.. warning:: Each entry must be unique, duplicate values are not allowed
|
|
|
|
|
|
``bluestore`` objectstore variables:
|
|
|
|
- ``db``: The logical volume name or full path to a partition.
|
|
|
|
- ``db_vg``: The volume group name, **required** if ``db`` is a logical volume.
|
|
|
|
- ``wal``: The logical volume name or full path to a partition.
|
|
|
|
- ``wal_vg``: The volume group name, **required** if ``wal`` is a logical volume.
|
|
|
|
|
|
.. note:: These ``bluestore`` variables are optional optimizations. Bluestore's
|
|
``db`` and ``wal`` will only benefit from faster devices. It is possible to
|
|
create a bluestore OSD with a single raw device.
|
|
|
|
.. warning:: Each entry must be unique, duplicate values are not allowed
|
|
|
|
|
|
``bluestore`` example using raw devices:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_objectstore: bluestore
|
|
osd_scenario: lvm
|
|
lvm_volumes:
|
|
- data: /dev/sda
|
|
- data: /dev/sdb
|
|
|
|
.. note:: Volume groups and logical volumes will be created in this case,
|
|
utilizing 100% of the devices.
|
|
|
|
``bluestore`` example with logical volumes:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_objectstore: bluestore
|
|
osd_scenario: lvm
|
|
lvm_volumes:
|
|
- data: data-lv1
|
|
data_vg: data-vg1
|
|
- data: data-lv2
|
|
data_vg: data-vg2
|
|
|
|
.. note:: Volume groups and logical volumes must exist.
|
|
|
|
|
|
``bluestore`` example defining ``wal`` and ``db`` logical volumes:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_objectstore: bluestore
|
|
osd_scenario: lvm
|
|
lvm_volumes:
|
|
- data: data-lv1
|
|
data_vg: data-vg1
|
|
db: db-lv1
|
|
db_vg: db-vg1
|
|
wal: wal-lv1
|
|
wal_vg: wal-vg1
|
|
- data: data-lv2
|
|
data_vg: data-vg2
|
|
db: db-lv2
|
|
db_vg: db-vg2
|
|
wal: wal-lv2
|
|
wal_vg: wal-vg2
|
|
|
|
.. note:: Volume groups and logical volumes must exist.
|
|
|
|
|
|
``filestore`` example with logical volumes:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_objectstore: filestore
|
|
osd_scenario: lvm
|
|
lvm_volumes:
|
|
- data: data-lv1
|
|
data_vg: data-vg1
|
|
journal: journal-lv1
|
|
journal_vg: journal-vg1
|
|
- data: data-lv2
|
|
data_vg: data-vg2
|
|
journal: journal-lv2
|
|
journal_vg: journal-vg2
|
|
|
|
.. note:: Volume groups and logical volumes must exist.
|
|
|
|
|
|
.. _osd_scenario_collocated:
|
|
|
|
collocated
|
|
----------
|
|
|
|
.. warning:: This scenario is deprecated in the Ceph mimic release, and fully
|
|
removed in newer releases. It is recommended to used the
|
|
:ref:`lvm scenario <osd_scenario_lvm>` instead
|
|
|
|
This OSD scenario uses ``ceph-disk`` to create OSDs with collocated journals
|
|
from raw devices.
|
|
|
|
Use ``osd_scenario: collocated`` to enable this scenario. This scenario also
|
|
has the following required configuration options:
|
|
|
|
- ``devices``
|
|
|
|
This scenario has the following optional configuration options:
|
|
|
|
- ``osd_objectstore``: defaults to ``filestore`` if not set. Available options are ``filestore`` or ``bluestore``.
|
|
You can only select ``bluestore`` if the Ceph release is luminous or greater.
|
|
|
|
- ``dmcrypt``: defaults to ``false`` if not set.
|
|
|
|
This scenario supports encrypting your OSDs by setting ``dmcrypt: True``.
|
|
|
|
If ``osd_objectstore: filestore`` is enabled both 'ceph data' and 'ceph journal' partitions
|
|
will be stored on the same device.
|
|
|
|
If ``osd_objectstore: bluestore`` is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored
|
|
on the same device. The device will get 2 partitions:
|
|
|
|
- One for 'data', called 'ceph data'
|
|
|
|
- One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block'
|
|
|
|
Example of what you will get:
|
|
|
|
.. code-block:: console
|
|
|
|
[root@ceph-osd0 ~]# blkid /dev/sda*
|
|
/dev/sda: PTTYPE="gpt"
|
|
/dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7"
|
|
/dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d"
|
|
|
|
An example of using the ``collocated`` OSD scenario with encryption would look like:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_scenario: collocated
|
|
dmcrypt: true
|
|
devices:
|
|
- /dev/sda
|
|
- /dev/sdb
|
|
|
|
|
|
.. _osd_scenario_non_collocated:
|
|
|
|
non-collocated
|
|
--------------
|
|
|
|
.. warning:: This scenario is deprecated in the Ceph mimic release, and fully
|
|
removed in newer releases. It is recommended to used the
|
|
:ref:`lvm scenario <osd_scenario_lvm>` instead
|
|
|
|
This OSD scenario uses ``ceph-disk`` to create OSDs from raw devices with journals that
|
|
exist on a dedicated device.
|
|
|
|
Use ``osd_scenario: non-collocated`` to enable this scenario. This scenario also
|
|
has the following required configuration options:
|
|
|
|
- ``devices``
|
|
|
|
This scenario has the following optional configuration options:
|
|
|
|
- ``dedicated_devices``: defaults to ``devices`` if not set
|
|
|
|
- ``osd_objectstore``: defaults to ``filestore`` if not set. Available options are ``filestore`` or ``bluestore``.
|
|
You can only select ``bluestore`` with the Ceph release is luminous or greater.
|
|
|
|
- ``dmcrypt``: defaults to ``false`` if not set.
|
|
|
|
This scenario supports encrypting your OSDs by setting ``dmcrypt: True``.
|
|
|
|
If ``osd_objectstore: filestore`` is enabled 'ceph data' and 'ceph journal' partitions
|
|
will be stored on different devices:
|
|
- 'ceph data' will be stored on the device listed in ``devices``
|
|
- 'ceph journal' will be stored on the device listed in ``dedicated_devices``
|
|
|
|
Let's take an example, imagine ``devices`` was declared like this:
|
|
|
|
.. code-block:: yaml
|
|
|
|
devices:
|
|
- /dev/sda
|
|
- /dev/sdb
|
|
- /dev/sdc
|
|
- /dev/sdd
|
|
|
|
And ``dedicated_devices`` was declared like this:
|
|
|
|
.. code-block:: yaml
|
|
|
|
dedicated_devices:
|
|
- /dev/sdf
|
|
- /dev/sdf
|
|
- /dev/sdg
|
|
- /dev/sdg
|
|
|
|
This will result in the following mapping:
|
|
|
|
- ``/dev/sda`` will have ``/dev/sdf1`` as journal
|
|
|
|
- ``/dev/sdb`` will have ``/dev/sdf2`` as a journal
|
|
|
|
- ``/dev/sdc`` will have ``/dev/sdg1`` as a journal
|
|
|
|
- ``/dev/sdd`` will have ``/dev/sdg2`` as a journal
|
|
|
|
|
|
If ``osd_objectstore: bluestore`` is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored
|
|
on a dedicated device.
|
|
|
|
So the following will happen:
|
|
|
|
- The devices listed in ``devices`` will get 2 partitions, one for 'block' and one for 'data'. 'data' is only 100MB
|
|
big and do not store any of your data, it's just a bunch of Ceph metadata. 'block' will store all your actual data.
|
|
|
|
- The devices in ``dedicated_devices`` will get 1 partition for RocksDB DB, called 'block.db' and one for RocksDB WAL, called 'block.wal'
|
|
|
|
By default ``dedicated_devices`` will represent block.db
|
|
|
|
Example of what you will get:
|
|
|
|
.. code-block:: console
|
|
|
|
[root@ceph-osd0 ~]# blkid /dev/sd*
|
|
/dev/sda: PTTYPE="gpt"
|
|
/dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0"
|
|
/dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c"
|
|
/dev/sdb: PTTYPE="gpt"
|
|
/dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217"
|
|
/dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a"
|
|
|
|
There is more device granularity for Bluestore ONLY if ``osd_objectstore: bluestore`` is enabled by setting the
|
|
``bluestore_wal_devices`` config option.
|
|
|
|
By default, if ``bluestore_wal_devices`` is empty, it will get the content of ``dedicated_devices``.
|
|
If set, then you will have a dedicated partition on a specific device for block.wal.
|
|
|
|
Example of what you will get:
|
|
|
|
.. code-block:: console
|
|
|
|
[root@ceph-osd0 ~]# blkid /dev/sd*
|
|
/dev/sda: PTTYPE="gpt"
|
|
/dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669"
|
|
/dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699"
|
|
/dev/sdb: PTTYPE="gpt"
|
|
/dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3"
|
|
/dev/sdc: PTTYPE="gpt"
|
|
/dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3"
|
|
|
|
An example of using the ``non-collocated`` OSD scenario with encryption, bluestore and dedicated wal devices would look like:
|
|
|
|
.. code-block:: yaml
|
|
|
|
osd_scenario: non-collocated
|
|
osd_objectstore: bluestore
|
|
dmcrypt: true
|
|
devices:
|
|
- /dev/sda
|
|
- /dev/sdb
|
|
dedicated_devices:
|
|
- /dev/sdc
|
|
- /dev/sdc
|
|
bluestore_wal_devices:
|
|
- /dev/sdd
|
|
- /dev/sdd
|