ceph-ansible/roles/ceph-defaults/defaults/main.yml

---
# You can override vars by using host or group vars

###########
# GENERAL #
###########

######################################
# Releases name to number dictionary #
######################################
ceph_release_num:
  dumpling: 0.67
  emperor: 0.72
  firefly: 0.80
  giant: 0.87
  hammer: 0.94
  infernalis: 9
  jewel: 10
  kraken: 11
  luminous: 12
  mimic: 13
  nautilus: 14
  dev: 99

# Directory to fetch cluster fsid, keys etc...
fetch_directory: fetch/

# The 'cluster' variable determines the name of the cluster.
# Changing the default value to something else means that you will
# need to change all the command line calls as well, for example if
# your cluster name is 'foo':
# "ceph health" will become "ceph --cluster foo health"
#
# An easier way to handle this is to use the environment variable CEPH_ARGS
# So run: "export CEPH_ARGS="--cluster foo"
# With that you will be able to run "ceph health" normally
cluster: ceph

# Inventory host group variables
mon_group_name: mons
osd_group_name: osds
rgw_group_name: rgws
mds_group_name: mdss
nfs_group_name: nfss
restapi_group_name: restapis
rbdmirror_group_name: rbdmirrors
client_group_name: clients
iscsi_gw_group_name: iscsigws
mgr_group_name: mgrs

# If configure_firewall is true, then ansible will try to configure the
# appropriate firewalling rules so that Ceph daemons can communicate
# with each others.
configure_firewall: True

# Open ports on corresponding nodes if firewall is installed on it
ceph_mon_firewall_zone: public
ceph_mgr_firewall_zone: public
ceph_osd_firewall_zone: public
ceph_rgw_firewall_zone: public
ceph_mds_firewall_zone: public
ceph_nfs_firewall_zone: public
ceph_restapi_firewall_zone: public
ceph_rbdmirror_firewall_zone: public
ceph_iscsi_firewall_zone: public

# Generate local ceph.conf in fetch directory
ceph_conf_local: false

############
# PACKAGES #
############
debian_package_dependencies:
  - python-pycurl

centos_package_dependencies:
  - python-pycurl
  - epel-release
  - python-setuptools
  - libselinux-python

redhat_package_dependencies:
  - python-pycurl
  - python-setuptools

suse_package_dependencies:
  - python-pycurl
  - python-xml
  - python-setuptools

# Whether or not to install the ceph-test package.
ceph_test: false

# Enable the ntp service by default to avoid clock skew on ceph nodes
# Disable if an appropriate NTP client is already installed and configured
ntp_service_enabled: true

# Set type of NTP client daemon to use, valid entries are chronyd, ntpd or timesyncd
# Note that this selection is currently ignored on containerized deployments
ntp_daemon_type: timesyncd


# Set uid/gid to default '64045' for bootstrap directories.
# '64045' is used for debian based distros. It must be set to 167 in case of rhel based distros.
# These values have to be set according to the base OS used by the container image, NOT the host.
bootstrap_dirs_owner: "64045"
bootstrap_dirs_group: "64045"

# This variable determines if ceph packages can be updated.  If False, the
# package resources will use "state=present".  If True, they will use
# "state=latest".
upgrade_ceph_packages: False

ceph_use_distro_backports: false # DEBIAN ONLY


###########
# INSTALL #
###########
ceph_repository_type: dummy

# ORIGIN SOURCE
#
# Choose between:
# - 'repository' means that you will get ceph installed through a new repository. Later below choose between 'community', 'rhcs', 'dev' or 'obs'
# - 'distro' means that no separate repo file will be added
#  you will get whatever version of Ceph is included in your Linux distro.
# 'local' means that the ceph binaries will be copied over from the local machine
ceph_origin: dummy
valid_ceph_origins:
  - repository
  - distro
  - local


ceph_repository: dummy
valid_ceph_repository:
  - community
  - rhcs
  - dev
  - uca
  - custom
  - obs


# REPOSITORY: COMMUNITY VERSION
#
# Enabled when ceph_repository == 'community'
#
ceph_mirror: http://download.ceph.com
ceph_stable_key: https://download.ceph.com/keys/release.asc
ceph_stable_release: dummy
ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}"

nfs_ganesha_stable: true # use stable repos for nfs-ganesha
nfs_ganesha_stable_branch: V2.6-stable
nfs_ganesha_stable_deb_repo: "{{ ceph_mirror }}/nfs-ganesha/deb-{{ nfs_ganesha_stable_branch }}/{{ ceph_stable_release }}"


# Use the option below to specify your applicable package tree, eg. when using non-LTS Ubuntu versions
# # for a list of available Debian distributions, visit http://download.ceph.com/debian-{{ ceph_stable_release }}/dists/
# for more info read: https://github.com/ceph/ceph-ansible/issues/305
#ceph_stable_distro_source: "{{ ansible_lsb.codename }}"

# This option is needed for _both_ stable and dev version, so please always fill the right version
# # for supported distros, see http://download.ceph.com/rpm-{{ ceph_stable_release }}/
ceph_stable_redhat_distro: el7


# REPOSITORY: RHCS VERSION RED HAT STORAGE (from 1.3)
#
# Enabled when ceph_repository == 'rhcs'
#
# This version is only supported on RHEL >= 7.1
# As of RHEL 7.1, libceph.ko and rbd.ko are now included in Red Hat's kernel
# packages natively. The RHEL 7.1 kernel packages are more stable and secure than
# using these 3rd-party kmods with RHEL 7.0. Please update your systems to RHEL
# 7.1 or later if you want to use the kernel RBD client.
#
# The CephFS kernel client is undergoing rapid development upstream, and we do
# not recommend running the CephFS kernel module on RHEL 7's 3.10 kernel at this
# time. Please use ELRepo's latest upstream 4.x kernels if you want to run CephFS
# on RHEL 7.
#
#
ceph_rhcs_version: "{{ ceph_stable_rh_storage_version | default(2) }}"
valid_ceph_repository_type:
  - cdn
  - iso
ceph_rhcs_iso_path: "{{ ceph_stable_rh_storage_iso_path | default('') }}"
ceph_rhcs_mount_path: "{{ ceph_stable_rh_storage_mount_path | default('/tmp/rh-storage-mount') }}"
ceph_rhcs_repository_path: "{{ ceph_stable_rh_storage_repository_path | default('/tmp/rh-storage-repo') }}" # where to copy iso's content

# RHCS installation in Debian systems
ceph_rhcs_cdn_debian_repo: https://customername:customerpasswd@rhcs.download.redhat.com
ceph_rhcs_cdn_debian_repo_version: "/3-release/" # for GA, later for updates use /3-updates/


# REPOSITORY: UBUNTU CLOUD ARCHIVE
#
# Enabled when ceph_repository == 'uca'
#
# This allows the install of Ceph from the Ubuntu Cloud Archive.  The Ubuntu Cloud Archive
# usually has newer Ceph releases than the normal distro repository.
#
#
ceph_stable_repo_uca: "http://ubuntu-cloud.archive.canonical.com/ubuntu"
ceph_stable_openstack_release_uca: queens
ceph_stable_release_uca: "{{ ansible_lsb.codename }}-updates/{{ ceph_stable_openstack_release_uca }}"

# REPOSITORY: openSUSE OBS
#
# Enabled when ceph_repository == 'obs'
#
# This allows the install of Ceph from the openSUSE OBS repository. The OBS repository
# usually has newer Ceph releases than the normal distro repository.
#
#
#ceph_obs_repo: "https://download.opensuse.org/repositories/filesystems:/ceph:/luminous/openSUSE_Leap_{{ ansible_distribution_version }}/"

# REPOSITORY: DEV
#
# Enabled when ceph_repository == 'dev'
#
ceph_dev_branch: master # development branch you would like to use e.g: master, wip-hack
ceph_dev_sha1: latest # distinct sha1 to use, defaults to 'latest' (as in latest built)

nfs_ganesha_dev: false # use development repos for nfs-ganesha

# Set this to choose the version of ceph dev libraries used in the nfs-ganesha packages from shaman
# flavors so far include: ceph_master, ceph_jewel, ceph_kraken, ceph_luminous
nfs_ganesha_flavor: "ceph_master"

ceph_iscsi_config_dev: true # special repo for deploying iSCSI gateways


# REPOSITORY: CUSTOM
#
# Enabled when ceph_repository == 'custom'
#
# Use a custom repository to install ceph.  For RPM, ceph_custom_repo should be
# a URL to the .repo file to be installed on the targets.  For deb,
# ceph_custom_repo should be the URL to the repo base.
#
ceph_custom_repo: https://server.domain.com/ceph-custom-repo


# ORIGIN: LOCAL CEPH INSTALLATION
#
# Enabled when ceph_repository == 'local'
#
# Path to DESTDIR of the ceph install
#ceph_installation_dir: "/path/to/ceph_installation/"
# Whether or not to use installer script rundep_installer.sh
# This script takes in rundep and installs the packages line by line onto the machine
# If this is set to false then it is assumed that the machine ceph is being copied onto will already have
# all runtime dependencies installed
#use_installer: false
# Root directory for ceph-ansible
#ansible_dir: "/path/to/ceph-ansible"


######################
# CEPH CONFIGURATION #
######################

## Ceph options
#
# Each cluster requires a unique, consistent filesystem ID. By
# default, the playbook generates one for you and stores it in a file
# in `fetch_directory`. If you want to customize how the fsid is
# generated, you may find it useful to disable fsid generation to
# avoid cluttering up your ansible repo. If you set `generate_fsid` to
# false, you *must* generate `fsid` in another way.
# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
fsid: "{{ cluster_uuid.stdout }}"
generate_fsid: true

ceph_conf_key_directory: /etc/ceph

# Permissions for keyring files in /etc/ceph
ceph_keyring_permissions: '0600'

cephx: true

## Client options
#
rbd_cache: "true"
rbd_cache_writethrough_until_flush: "true"
rbd_concurrent_management_ops: 20

rbd_client_directories: true # this will create rbd_client_log_path and rbd_client_admin_socket_path directories with proper permissions

# Permissions for the rbd_client_log_path and
# rbd_client_admin_socket_path. Depending on your use case for Ceph
# you may want to change these values. The default, which is used if
# any of the variables are unset or set to a false value (like `null`
# or `false`) is to automatically determine what is appropriate for
# the Ceph version with non-OpenStack workloads -- ceph:ceph and 0770
# for infernalis releases, and root:root and 1777 for pre-infernalis
# releases.
#
# For other use cases, including running Ceph with OpenStack, you'll
# want to set these differently:
#
# For OpenStack on RHEL, you'll want:
#   rbd_client_directory_owner: "qemu"
#   rbd_client_directory_group: "libvirtd" (or "libvirt", depending on your version of libvirt)
#   rbd_client_directory_mode: "0755"
#
# For OpenStack on Ubuntu or Debian, set:
#    rbd_client_directory_owner: "libvirt-qemu"
#    rbd_client_directory_group: "kvm"
#    rbd_client_directory_mode: "0755"
#
# If you set rbd_client_directory_mode, you must use a string (e.g.,
# 'rbd_client_directory_mode: "0755"', *not*
# 'rbd_client_directory_mode: 0755', or Ansible will complain: mode
# must be in octal or symbolic form
rbd_client_directory_owner: null
rbd_client_directory_group: null
rbd_client_directory_mode: null

rbd_client_log_path: /var/log/ceph
rbd_client_log_file: "{{ rbd_client_log_path }}/qemu-guest-$pid.log" # must be writable by QEMU and allowed by SELinux or AppArmor
rbd_client_admin_socket_path: /var/run/ceph # must be writable by QEMU and allowed by SELinux or AppArmor

## Monitor options
#
# You must define either monitor_interface, monitor_address or monitor_address_block.
# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).
# Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable.
# Preference will go to monitor_address if both monitor_address and monitor_interface are defined.
monitor_interface: interface
monitor_address: 0.0.0.0
monitor_address_block: subnet
# set to either ipv4 or ipv6, whichever your network is using
ip_version: ipv4
mon_use_fqdn: false # if set to true, the MON name used will be the fqdn in the ceph.conf

##########
# CEPHFS #
##########
cephfs: cephfs # name of the ceph filesystem
cephfs_data: cephfs_data # name of the data pool for a given filesystem
cephfs_metadata: cephfs_metadata # name of the metadata pool for a given filesystem

cephfs_pools:
  - { name: "{{ cephfs_data }}", pgs: "{{ osd_pool_default_pg_num }}", size: "{{ osd_pool_default_size }}" }
  - { name: "{{ cephfs_metadata }}", pgs: "{{ osd_pool_default_pg_num }}", size: "{{ osd_pool_default_size }}" }

## OSD options
#
is_hci: false
hci_safety_factor: 0.2
non_hci_safety_factor: 0.7
osd_memory_target: 4294967296
journal_size: 5120 # OSD journal size in MB
block_db_size: -1 # block db size in bytes for the ceph-volume lvm batch. -1 means use the default of 'as big as possible'.
public_network: 0.0.0.0/0
cluster_network: "{{ public_network | regex_replace(' ', '') }}"
osd_mkfs_type: xfs
osd_mkfs_options_xfs: -f -i size=2048
osd_mount_options_xfs: noatime,largeio,inode64,swalloc
osd_objectstore: bluestore

# xattrs. by default, 'filestore xattr use omap' is set to 'true' if
# 'osd_mkfs_type' is set to 'ext4'; otherwise it isn't set. This can
# be set to 'true' or 'false' to explicitly override those
# defaults. Leave it 'null' to use the default for your chosen mkfs
# type.
filestore_xattr_use_omap: null

## MDS options
#
mds_use_fqdn: false # if set to true, the MDS name used will be the fqdn in the ceph.conf
mds_max_mds: 1

## Rados Gateway options
#
radosgw_frontend_type: civetweb # For additionnal frontends see: http://docs.ceph.com/docs/mimic/radosgw/frontends/

radosgw_civetweb_port: 8080
radosgw_civetweb_num_threads: 100
radosgw_civetweb_options: "num_threads={{ radosgw_civetweb_num_threads }}"
# For additional civetweb configuration options available such as SSL, logging,
# keepalive, and timeout settings, please see the civetweb docs at
# https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md

radosgw_frontend_port: "{{ radosgw_civetweb_port if radosgw_frontend_type == 'civetweb' else '8080' }}"
radosgw_frontend_options: "{{ radosgw_civetweb_options if radosgw_frontend_type == 'civetweb' }}"


# You must define either radosgw_interface, radosgw_address.
# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).
# Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable.
# Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined.
radosgw_interface: interface
radosgw_address: 0.0.0.0
radosgw_address_block: subnet
radosgw_keystone_ssl: false # activate this when using keystone PKI keys
# Rados Gateway options
email_address: foo@bar.com

## REST API options
#
restapi_interface: "{{ monitor_interface }}"
restapi_address: "{{ monitor_address }}"
restapi_port: 5000

## Testing mode
# enable this mode _only_ when you have a single node
# if you don't want it keep the option commented
#common_single_host_mode: true

## Handlers - restarting daemons after a config change
# if for whatever reasons the content of your ceph configuration changes
# ceph daemons will be restarted as well. At the moment, we can not detect
# which config option changed so all the daemons will be restarted. Although
# this restart will be serialized for each node, in between a health check
# will be performed so we make sure we don't move to the next node until
# ceph is not healthy
# Obviously between the checks (for monitors to be in quorum and for osd's pgs
# to be clean) we have to wait. These retries and delays can be configurable
# for both monitors and osds.
#
# Monitor handler checks
handler_health_mon_check_retries: 5
handler_health_mon_check_delay: 10
#
# OSD handler checks
handler_health_osd_check_retries: 40
handler_health_osd_check_delay: 30
handler_health_osd_check: true
#
# MDS handler checks
handler_health_mds_check_retries: 5
handler_health_mds_check_delay: 10
#
# RGW handler checks
handler_health_rgw_check_retries: 5
handler_health_rgw_check_delay: 10

# NFS handler checks
handler_health_nfs_check_retries: 5
handler_health_nfs_check_delay: 10

# RBD MIRROR handler checks
handler_health_rbd_mirror_check_retries: 5
handler_health_rbd_mirror_check_delay: 10

# MGR handler checks
handler_health_mgr_check_retries: 5
handler_health_mgr_check_delay: 10

###############
# NFS-GANESHA #
###############

# Confiure the type of NFS gatway access.  At least one must be enabled for an
# NFS role to be useful
#
# Set this to true to enable File access via NFS.  Requires an MDS role.
nfs_file_gw: false
# Set this to true to enable Object access via NFS. Requires an RGW role.
nfs_obj_gw: true


#############
# MULTISITE #
#############

rgw_multisite: false

# The following Multi-site related variables should be set by the user.
#
# If there is more than 1 RGW in a master or secondary cluster than rgw_multisite_endpoints needs to be a comma seperated list (with no spaces) of the RGW endpoints in the format:
# {{ rgw_multisite_proto }}://{{ ansible_fqdn }}:{{ radosgw_frontend_port }}
# ex: rgw_multisite_endpoints: http://foo.example.com:8080,http://bar.example.com:8080,http://baz.example.com:8080
#
# If there is only 1 RGW in the inventory, rgw_multisite_endpoints does not need to change
#
# rgw_zone is set to "default" to enable compression for clusters configured without rgw multi-site
# If multisite is configured rgw_zone should not be set to "default". See README-MULTISITE.md for an example.
rgw_zone: default

rgw_zonemaster: true
rgw_zonesecondary: false
rgw_multisite_proto: "http"
rgw_multisite_endpoint_addr: "{{ ansible_fqdn }}"
#rgw_multisite_endpoints_list: "{{ rgw_multisite_proto }}://{{ ansible_fqdn }}:{{ radosgw_frontend_port }}"
#rgw_zonegroup: solarsystem # should be set by the user
#rgw_zone_user: zone.user
#rgw_realm: milkyway # should be set by the user
#system_access_key: 6kWkikvapSnHyE22P7nO # should be re-created by the user
#system_secret_key: MGecsMrWtKZgngOHZdrd6d3JxGO5CPWgT2lcnpSt # should be re-created by the user

# Multi-site remote pull URL variables
rgw_pull_port: "{{ radosgw_civetweb_port }}"
rgw_pull_proto: "http" # should be the same as rgw_multisite_proto for the master zone cluster
#rgw_pullhost: localhost # rgw_pullhost only needs to be declared if there is a zone secondary. It should be the same as rgw_multisite_endpoint_addr for the master zone cluster


###################
# CONFIG OVERRIDE #
###################

# Ceph configuration file override.
# This allows you to specify more configuration options
# using an INI style format.
# The following sections are supported: [global], [mon], [osd], [mds], [rgw]
#
# Example:
# ceph_conf_overrides:
#   global:
#     foo: 1234
#     bar: 5678
#
ceph_conf_overrides: {}


#############
# OS TUNING #
#############

disable_transparent_hugepage: "{{ false if osd_objectstore == 'bluestore' else true }}"
os_tuning_params:
  - { name: fs.file-max, value: 26234859 }
  - { name: vm.zone_reclaim_mode, value: 0 }
  - { name: vm.swappiness, value: 10 }
  - { name: vm.min_free_kbytes, value: "{{ vm_min_free_kbytes }}" }

# For Debian & Red Hat/CentOS installs set TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
# Set this to a byte value (e.g. 134217728)
# A value of 0 will leave the package default.
ceph_tcmalloc_max_total_thread_cache: 0


##########
# DOCKER #
##########
docker_exec_cmd:
docker: false
ceph_docker_image: "ceph/daemon"
ceph_docker_image_tag: latest-mimic
ceph_docker_registry: docker.io
## Client only docker image - defaults to {{ ceph_docker_image }}
ceph_client_docker_image: "{{ ceph_docker_image }}"
ceph_client_docker_image_tag: "{{ ceph_docker_image_tag }}"
ceph_client_docker_registry: "{{ ceph_docker_registry }}"
ceph_docker_enable_centos_extra_repo: false
ceph_docker_on_openstack: false
containerized_deployment: False

############
# KV store #
############
containerized_deployment_with_kv: false
mon_containerized_default_ceph_conf_with_kv: false
kv_type: etcd
kv_endpoint: 127.0.0.1
kv_port: 2379


# this is only here for usage with the rolling_update.yml playbook
# do not ever change this here
rolling_update: false

# this is only here for usage with the switch-from-non-containerized-to-containerized-ceph-daemons.yml playbook
# do not ever change this here
switch_to_container: false

#####################
# Docker pull retry #
#####################
docker_pull_retry: 3
docker_pull_timeout: "300s"


#############
# OPENSTACK #
#############
openstack_config: false
openstack_glance_pool:
  name: "images"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"
openstack_cinder_pool:
  name: "volumes"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"
openstack_nova_pool:
  name: "vms"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"
openstack_cinder_backup_pool:
  name: "backups"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"
openstack_gnocchi_pool:
  name: "metrics"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"
openstack_cephfs_data_pool:
  name: "manila_data"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"
openstack_cephfs_metadata_pool:
  name: "manila_metadata"
  pg_num: "{{ osd_pool_default_pg_num }}"
  pgp_num: "{{ osd_pool_default_pg_num }}"
  rule_name: "replicated_rule"
  type: 1
  erasure_profile: ""
  expected_num_objects: ""
  application: "rbd"
  size: "{{ osd_pool_default_size }}"

openstack_pools:
  - "{{ openstack_glance_pool }}"
  - "{{ openstack_cinder_pool }}"
  - "{{ openstack_nova_pool }}"
  - "{{ openstack_cinder_backup_pool }}"
  - "{{ openstack_gnocchi_pool }}"
  - "{{ openstack_cephfs_data_pool }}"
  - "{{ openstack_cephfs_metadata_pool }}"


# The value for 'key' can be a pre-generated key,
# e.g key: "AQDC2UxZH4yeLhAAgTaZb+4wDUlYOsr1OfZSpQ=="
# By default, keys will be auto-generated.
#
openstack_keys:
  - { name: client.glance, caps: { mon: "profile rbd", osd: "profile rbd pool=volumes, profile rbd pool={{ openstack_glance_pool.name }}"}, mode: "0600" }
  - { name: client.cinder, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_cinder_pool.name }}, profile rbd pool={{ openstack_nova_pool.name }}, profile rbd pool={{ openstack_glance_pool.name }}"}, mode: "0600" }
  - { name: client.cinder-backup, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_cinder_backup_pool.name }}"}, mode: "0600" }
  - { name: client.gnocchi, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_gnocchi_pool.name }}"}, mode: "0600", }
  - { name: client.openstack, caps: { mon: "profile rbd", osd: "profile rbd pool={{ openstack_glance_pool.name }}, profile rbd pool={{ openstack_nova_pool.name }}, profile rbd pool={{ openstack_cinder_pool.name }}, profile rbd pool={{ openstack_cinder_backup_pool.name }}"}, mode: "0600" }


###############
# DEPRECATION #
###############

use_fqdn_yes_i_am_sure: false